My Golf R broke down!! // CAM MAGNET FAILURE
HTML-код
- Опубликовано: 28 дек 2023
- Not what i wanted for Christmas that`s for sure!
Luckily this one was an easy fix and a mega common problem for MQB cars.
Cam Magnets on the shelf saved the day haha
T-Shirts and Hoodies!
decimaltenths.co.uk/dtmerch/
Check out our Website:
decimaltenths.co.uk/
------------------------------------------------------------------
Follow us on Social Media:
Facebook : / decimal-tenths-3627335...
Instagram: / decimaltenths
------------------------------------------------------------------
The camera I use in the garage:
amzn.to/2Up9Vmf
The camera I use outside of the garage:
amzn.to/2UoD1SF
A selection of the tools I use:
1/2" Torque Wrench: amzn.to/2vXQwPZ
1/4" Torque Wrench: amzn.to/39xOd3X
Feeler Gauges: amzn.to/2wKACZy
Dial Test Indicator: amzn.to/2xCpM7R
The Scales you should get... :amzn.to/3aqSgjv 
Авто/Мото
INA is the OE manufacturer (depending on Model Year) or Pierburg and they're both just under $30U.S.
The "VW" stamped cramp is just mark-up.
As long as you're not buying a Standard version or from EBAY, or Amazon you're good with anything FCPEuro offers on their site.
On my preventative maintenance list for 2024 🙂 thanks for posting 👍
Sounds just like me
I changed mine efter 70K just to be sure. Is a known problem …
@@kenand10 got round to doing them myself today. I noticed it would choke a little on idle and couple times whilst driving the car would cut out. No idea if it was related to the cam magnets but I thought I’d do them especially for what they’re worth
Nice glad I found your channel.. I’ve just come out of my 2for2 with Vw so will be maintaining it myself from now on..
Good to see it's a simple fix. I've just bought an 2015 Audi S3 that has a bit of an intermittent rough idle. It'll be fine, then it'll start rumbling & the rev needle jumps about a bit... give it a little rev and it settles... Been hearing a lot of people talking about these cam magnets but never actually showing how to replace them, so nice to finally see one show how to replace them! Job on my list to do ASAP
Nicely swerved taking misses shopping mate. Top video & have happy new year to u & ur family 😎👊👍👌✌
You knows it 😂. All the best pal
The positive, LOL, feel that. Good stuff.
Seen a similar issue with the cam adjustment system on these. was causing rough running and seemed like timing was out as no faults for cam magnets. The actual issue turned out to be with the little valve that screws into the end of the cam. it had failed in a way that meant the part the cam magnet depresses was constantly pressed in so inlet cam was at full adjustment on idle. that was gen 2 ea888
Sounds well Nick! All the best for 2024 to you and the team!
Cheers, you too pal 👍👍
Great video I always assumed this was a cam cover off job. Nice to know how to tackle this one when it comes around 👍🏻
Easy peasy job for WHEN it happens...😂
Nice man love colour of the mk5 on the ramp looks mint
Aye its a rare colour that, and does look mint 👌
Thanks had the issue
My mk7 is making a loud clacking noise. Its intermittent. No codes on the dash. When i rev the engine it will stall it. When i first start it up it doesnt clack, then itll clack once, a couple times, then constant clacking. Sometimes when i let the clutch out it just dies right away. But the noise is coming from the passenger side where the belts are. Checked all the coils, checked the oil filter no metal, checked the ac compressor. I unplugged the intake magnet and it didn’t change anything. I wonder if unplugging the magnets is a good way to diagnose it
Hello, do you think a P0014 code could be the cam adjuster magnets?? Also do I have to disconnect the battery when replacing the cam adjuster magnets?? Thank you for posting👍🏻
Best to data log to confirm. No you don't need to disconnect the battery to swap out
Are you free for a balloon party😂😂
Yeah will just need to confirm a date and take a deposit...😂
Nice one 👍 would you recommend changing these at any mileage? Thanks
If you like spending money then go for it pal. Otherwise I'd just leave them until they go. They don't damage the car, just cause running issues.
@DecimalTenths hello thanks for that just sometimes seems like a odd little miss on me s3 8v but it's a manual could be that 👍
I did mine few months ago, i could only do the exhaust one as the screw head for the intake was worn, any idea how to get it off?
At least it is in good access for you! If a torx is gone then you could try bashing in a bigger torx or a rescue torx bit (torx bit but with bigger angled teeth). Beyond that it's drill it out.
I got the same issue was at the gasstation and started to run bad and just stopped after a couple of tries my car did perfectly fine im gonna try this hopefully this will fix the issue
Best to log and confirm it. Playing parts darts is no guarantee of it being the problem. 😁
true thing I will bring my car monday to a ''vagspecalist'' hopefully they can help me out I just use like a carly obd thing got me a fault code P001400 but better be safe then sorry just will bring her in. @@DecimalTenths
I have a B9 A4 2.0 TFSI 190PS and the magnets are leaking very slightly but no running issues. Shall I change them and what make shall I get because TPS want £187 for a pair.
If they're leaking then just get fresh seals. The cover has to be removed to replace the seals but it's easy enough.
Are they both the same part I think I need to do mine so are they the same both sides so buy 2 of the same ?
Yes the same.
I feel the same about the bonnet pull. Its a nasty feeling having to pull that thing 🤢
😂 hate it...
Even nastier is when the cable breaks (or isn't connected after mucking about with headlights) and having to cut through your front grill 😢
Turn the rubber bumps in. Easy adjustment
What kms range do you see these going bad at normally? I have a 2016 GolfR Stage 2 with around 108,000kms I think I need to change these just in case especially since I AutoX the car too.
There is no mileage for when they would fail. Logging can tell you, but also the symptoms that are generally present
Had an EML come up on our Cupra Formentor EA888 and was diagnosed by Cupra as a MAP sensor . The car had done 9k miles. Are these common to fail as well ? Also what is the service oil change intervals for the car. Thanks :)
MAP sensors failing isn't common at all from my experience. Anything can happen though. The oil change interval is different as per each model, but I'd recommend 6 monthly or 6k miles.
@@DecimalTenths The dealer said it was rare and took them 4 weeks to get a replacement. Hasnt had an EML come up since. We are at 7k miles in the car now and the countdown says 50 days to its service. This service is with the car still under manufacturers warranty , that is due and then we can use a local recomended non-franchise place for thiis and get the oil servicing more regular. Thanks for your reply :)
Are both front and rear magnets the same part or are they separate and specific?
Same part 👍
Are these camshaft magnets the same for the Audi s1?
Yes they are 👍
Hiya mate could i get so.e advice please . Ive got seat leon 2007 tfsi 2.0 turbo .
Cut long story short if left car on idle for long time get blue smoke from exhaust. Chsnged oil filter and new injectors. I noticed when taking manifold off was alot of carbon in head but wasnt able to clean as needed car in rush . . Car smells really rich i have done pcv delete but was doing if before that . Only changed all injectors as misfire and fixed that but still blue smoke when left on idle any help would be appreciated
If the car was in front of me and with logging I'd be able to give you some great advice.
Without that I can only guess.
Blue smoke with sustained idle suggests a turbo seal problem. Anything else would be detected easily but too many variables to know for sure.
@@DecimalTenths
OK mate I will give you a call after the new year just found work shop details . Can arrange me me come to visit you . Will take few few hours to get to you mate but will sort out a visit and call you Tuesday. 👍 if that's OK have a good new year
Good job bro (( P0016 &P0017..?
Is the cam magnet the same for both the intake and exhaust cam magnets
It is 👍
@@DecimalTenths awesome thanks. Will be sticking for “just in case purposes”
Does it need coding when replacing it or it’s just plug&play?
Plug n play
Nice u should do a day in the life of dt or a week😅
Been asked for that a lot so it's something that will happen in 2024 👍
@@DecimalTenths yea be good to see what goes go 😜
Are the lights in a golf r stock?
The lights in my Golf R are stock Golf R ones.
Hi how can I graph on vcds for my tt 18t. And what specs should I be looking for should it be 15 intake 0 exhaust
Do you mean for a mk1 8N TT?
If you want to check that then the only thing to check is phase and cam position at blocks 091 and 093 and use advanced measuring blocks then select graph. Simples.
@DecimalTenths appreciate that mate. I'll do that tomorrow. I commented on that funny video when your friend bent a rod. I have kess and would love an aggressive map for it. I play a little myself with ecm titanium but you seem to be a master. Would love a copy of his cheese bending map so I can copy the maps into mine
What software did you use to read the logs for the diagnostics on this?
I use Dieselpower log viewer. 👍
Cheers bud I'll look into it. I have vcds but new toys are always welcome
Mine is 64plate 74k fvwsh do we need to worry about changing timing chains on these?
The interval is 100k, but it is best to check the correlation and log the car with a diagnostic tool such as vcds which gives a far better idea of the chain and tensioner/guides condition
👍🏽
Hello, at what mileage you had this issue? Thanks.
Weve seen this on low and high mileage cars. The Magnets can fail, it just happens.
Is it possible that these magnets are faulty, but they don't turn on the fault light?
Yes very common that you get no fault light on. 👍
@@DecimalTenths I checked the cam advance values in the diagnosis, at idle they are quite regular, if I accelerate, the intake values increase and decrease much more than the target value. Could the problem always depend on the magnet?
Im new to VWs what is that zip tie thing again
Its common for the connection to come apart leaving you unable to open the bonnet. A few cable ties prevents this.
@@DecimalTenths thank you for the info!! So just zip tie that part under the hood?
@krishnapatel2863 yes so it can't pop open.
@@DecimalTenths well thank you sir!
Bonnet release. Turn the rubber bumps in 1 turn. It's the latch is too tight
What code did you get for this I got code p001100 A camshaft position (bank 1)- timing over advanced or system performance I have been told to change the cam magnets
I didn't get a code on this one funnily enough. That code is common though. Logging the cam positions will confirm
@@DecimalTenths right nice one pal cheers
Pal you need get rlads Badhabit back on chanel👊👌👍
Ha aye I should 👍
@@DecimalTenths be good see back on hear pal👍
Obviously the wife doesn’t watch the videos 😂
She will eventually 😂. I'm.sure she'll see the funny side by then 🤞