you probably dont care at all but does anyone know of a method to log back into an Instagram account?? I was dumb lost the password. I love any help you can give me!
@Jerome Cade Thanks so much for your reply. I found the site thru google and I'm waiting for the hacking stuff now. Seems to take quite some time so I will reply here later with my results.
Hey, Bud....fill up some empty plastic water bottles with water and use them as re-freezable ice packs. The 2liter sizes are good, but the smaller sizes are more usable in placing them around your food and drink containers. Hopefully the freezer compartment in your refrigerator can handle the job. The smaller bottles will freeze up a lot quicker than the 2 liter sizes. They can give you some more cold drinking water out on the job site after they've melted down some. Those bags of small cubes suck because they just don't last long enough for spit. Another thought, too, is you can go to a large truck stop like Petro or a 76 or some other, and check out those large ice chests that plug into a cigarette lighter and consider getting one of those. I used one when I was in longhaul trucking and they work GREAT. They will keep things about 45 degrees lower than the ambient temps inside your truck OR that much warmer. Those suckers cool OR warm things, depending on what your needs are at any particular time. I bought one of the small, 6-pack ones for my brother in law to have in his patrol car. (he was a city cop) I thought he could use it for snacks, etc....especially when on night shift or a stakeout. I had my large chest (about a 30 quart size) for over 3 years on the road and still have it stored away. I kept pints of chocolate milk and donuts in it for breakfast eating so I could keep moving and the milk would actually "slush up" in it. The heating / cooling thing is controlled by a simple switch. You make the best money as a trucker if you keep that left door closed and not stop at every dang truckstop. Hope these ideas are some help to you. I like your vids, man. Oh.....you can get a voltage adapter that plugs into a 110 wall socket and use those chests in your home. Put your stuff inside of it at night before going to bed for pre-cooling the food and just put it into your truck the next morning before leaving for work; plug it into the cigar lighter and food will be ready to eat right then, if you choose.
I like your bed alot! I'm a welder too and can't pant to save my life. I really like thats its got some rust. Just like the weleding kart I maded for my Hobart 190. I'm buying a miller Bobcat soon I cant wait to make a bed to my 3/4 ton to put every thing I need on.
hey brother you should show the tools you have and how you use them in the field. Like your miter finder and those pipe clamps, would be informative, keep the videos coming!
Yeah, I agree, at first I wanted to make it look good. But as I continued to build it I changed my direction to how well it will work. Once I built the deck of the bed, and the skirts, I realized I needed it to make money first and look good second.
Need you a good jewl Clamp to for getting that high low outta your fits when there in the rack and such doing field welds and good purge dam stuff and tape as well
AWWW poor Hank, give him some of the good stuff so he associates the sizzling with treats, next thing you know he will be knocking you down to get to the stove!
Weight is not an issue for his truck,u don't want a light bed on a one ton truck it will ride terrible!!the heavier the better it will ride!plus it's a diesel so making it lighter isn't gonna change the mpg really at all!my friend built an aluminum flatbed for his truck and hated it because his truck rode 10x worse,big trucks like the weight!!
that's how we roll welders do it they build their own beds by mother's boyfriend in the 70s built his own bed and then went to Alaska the well the pipelines up there cool dude
Tyrone Rips Up Cats Kang there are local dogs in your area being killed all the time and you're concerned about a dog in America being locked up in a most likely air-conditioned camper all day
Just seen this video. You said you were from Missouri, what part? I'm from south east mo. I was wondering how you got into pipelining and any advice you could share. Thanks
Zachariah Lawson hey thanks man just saw the trucks description in the posting. Lol but another question do you run 1/4 or 3/8 oxy acetylene hoses? Also what size welding cable and whip?
How much weight do you pull of the gooseneck behind the axle? I am building a rig and need to move the hitch behind the axle but everyone says it will ride bad and will not work.
HolisterProductions I pull a 36 ft 5th wheel camper. It’s 12,000lbs dry and I have it pretty full with everything I own. It doesn’t pull bad at all with the hitch behind the axle.
Depends on the amount of tools, type of machine, and what thickness of metal you use for the bed. I haven't weighed mine, but ive heard they weigh in the ballpark of 13,000 lbs
Hi my name is gee and I was just wondering if you needed a welder helper or no anybody who needs one or any company's who are hiring for a welder helper
They post welding, helping, and labor hand jobs on the internet. I don't have any certs either. When you test for a company they give you certs for the gas company you're working for. Usually they last 6 months before you have to re-test.
Why not paint it??? If you do something, do it right. Plus, having it rusty makes employers think you are in it for the short term. Just my opinion though. Nice bed.
Finally a truck that looks like it’s actually been on a job site before👍🏼
you probably dont care at all but does anyone know of a method to log back into an Instagram account??
I was dumb lost the password. I love any help you can give me!
@Erik Brooks Instablaster =)
@Jerome Cade Thanks so much for your reply. I found the site thru google and I'm waiting for the hacking stuff now.
Seems to take quite some time so I will reply here later with my results.
@Jerome Cade It worked and I actually got access to my account again. Im so happy:D
Thank you so much you saved my account!
@Erik Brooks Glad I could help xD
Nice rig bud, you will always be changing & updating the tool boxes no matter what. i like the rusted mild steel look.
Well done sir ! Thanks for sharing your rig.
Hey, Bud....fill up some empty plastic water bottles with water and use them as re-freezable ice packs. The 2liter sizes are good, but the smaller sizes are more usable in placing them around your food and drink containers. Hopefully the freezer compartment in your refrigerator can handle the job. The smaller bottles will freeze up a lot quicker than the 2 liter sizes. They can give you some more cold drinking water out on the job site after they've melted down some. Those bags of small cubes suck because they just don't last long enough for spit. Another thought, too, is you can go to a large truck stop like Petro or a 76 or some other, and check out those large ice chests that plug into a cigarette lighter and consider getting one of those. I used one when I was in longhaul trucking and they work GREAT. They will keep things about 45 degrees lower than the ambient temps inside your truck OR that much warmer. Those suckers cool OR warm things, depending on what your needs are at any particular time. I bought one of the small, 6-pack ones for my brother in law to have in his patrol car. (he was a city cop) I thought he could use it for snacks, etc....especially when on night shift or a stakeout. I had my large chest (about a 30 quart size) for over 3 years on the road and still have it stored away. I kept pints of chocolate milk and donuts in it for breakfast eating so I could keep moving and the milk would actually "slush up" in it. The heating / cooling thing is controlled by a simple switch. You make the best money as a trucker if you keep that left door closed and not stop at every dang truckstop. Hope these ideas are some help to you. I like your vids, man. Oh.....you can get a voltage adapter that plugs into a 110 wall socket and use those chests in your home. Put your stuff inside of it at night before going to bed for pre-cooling the food and just put it into your truck the next morning before leaving for work; plug it into the cigar lighter and food will be ready to eat right then, if you choose.
Nice set up!
I got fed up with having a mess in my back seat so i took the seat out and put in an Alu shelf/ organizer box.
I've been looking for a shelf to buy, I don't really want to spend the time making one.
I like your bed alot! I'm a welder too and can't pant to save my life. I really like thats its got some rust. Just like the weleding kart I maded for my Hobart 190. I'm buying a miller Bobcat soon I cant wait to make a bed to my 3/4 ton to put every thing I need on.
There is a lot of rig welders that use 3/4 ton trucks, you can make a pretty nice bed for them and keep it lightweight!
Great job and video.
Nice setup man
hey brother you should show the tools you have and how you use them in the field. Like your miter finder and those pipe clamps, would be informative, keep the videos coming!
Good Idea! Ill work on that!
I'm trying to design a bed for my rig. I don't really care how it turns out so long as I can make money with it.
Yeah, I agree, at first I wanted to make it look good. But as I continued to build it I changed my direction to how well it will work. Once I built the deck of the bed, and the skirts, I realized I needed it to make money first and look good second.
Bellering B all that matters is making money dosn't matter if its pretty of ugly as long as it makeing you some cash
Lol you forgot to mention your W.C Graves Fitters Blue Book you had in there
Still a nice setup id painted it before installing that bed or line X it I couldnt look at all that surface rust on my truck daily lol
1964 Red Face...Yeah Baby. Mine is a 1968. A year younger than me and in a helluva lot better shape.lol
Need you a good jewl Clamp to for getting that high low outta your fits when there in the rack and such doing field welds and good purge dam stuff and tape as well
Nice truck
Nice thing about being a welder is you can change the bed anyway you want.
Man I dig how ya built your bed
Jordan Rendino thanks!
Love the rusty look
Not bad for a first time! 😃👍👍🇺🇸🇺🇸🇺🇸
Thanks for the tour
Nice rig brother..
nice truck man love it
Hadn't seen any videos in forever.
where abouts in MO are you located got some work i want done.
hola podes mostrar mas en detalle el extractor de poleas de color rojo que se aprecia en el minuto 6:02 que lo quiero fabricar gracias feliz navidad
AWWW poor Hank, give him some of the good stuff so he associates the sizzling with treats, next thing you know he will be knocking you down to get to the stove!
If you were going to buy a bed, knowimg what you know now what and where would you buy?? Any ideas?
Texas proud lol.
You need some paint and a weight bench first thing!!!!!
Nice setup
odessa viewer right here, single hand welder for now, been 2 years of that. couple more years i’ll b breaking out the rig truck
i saw a rig just like yours in charlottesville va
Just bought a 2012 3500hd and will be removing the old mechanic bed and hopefully can build me a nice bed. I have tons of crap, I mean tools.
I’d like to see how you made the across bed toolbox
Poor dog. Cool video very informative.
Nice rig to say the least!!
Like an unsung melody, the truth is waiting there for you to find it, it's not a blight but a remedy, a clear reminder of how it began
You built that bed heavy as hell id tried to stay light yet strong
Weight is not an issue for his truck,u don't want a light bed on a one ton truck it will ride terrible!!the heavier the better it will ride!plus it's a diesel so making it lighter isn't gonna change the mpg really at all!my friend built an aluminum flatbed for his truck and hated it because his truck rode 10x worse,big trucks like the weight!!
Missouri farm tags i bit lol
First time watching, what kind of dog is Hank? He looks just like my dog, to a tee.. Thanks Mike
Wer was u staying at..?? I heard u saying something about Odessa, are u by Monahans TX or Kermint TX?
Just subbed to the channel. Where did you get the straight edge holders?
Some flushmounted ATV lights on the back would be awesome on each side of your lettering. RUclips is a great recipe book
good lookin rig i have an 06 too is that a short or long bed?
could probably get into those boxes with a claw hammer, bend back that tab and the latch should clear even with the lock
Probably could, but no matter how I lock them someone could get a battery powered grinder and cut into them..
This, locks are to keep honest people honest, a determined thief will get what the want regardless.
Those locks can be broken with two open ended wrenches
Why did you stud a stock 5.9 tractor engine??
Maybe hes gonna put a compound setup on it in the future
nice rig 👍🏽👍🏼
What kind of lead reels are those?
hey man was this video made in kermit tx
I believe iv seen that rig in joelton tn.
that's how we roll welders do it they build their own beds by mother's boyfriend in the 70s built his own bed and then went to Alaska the well the pipelines up there cool dude
Can you make a video on how to make a hoosier pole
I will try and put it in one of my videos for you!
What part of Missouri are you from?
Pittsburgh
That look like big lake tx
Are yall using abrasive chop saws or carbide , just curious?
Livin Like Larry
The longer you work the more youll want to change it lol. I aint never built a bed i didnt want to change a week later
I'm starting to figure that out! I don't know if ill ever paint it, just in case I need to change something!
To many square corners for me
It would look better on an old square body Chevy with swampers and 454 ss 4 barrels carb
Hey some Matt black paint
how much did you spend on making your bed
Since I built it, and didn't have any labor it was just the cost of 4 or 5 sheets of 4x8. Plus whatever hinges and latches you put on it.
budget in a couple of gallons of paint too
Tyrone Rips Up Cats Kang go get your own dog, he'll like you more.
Tyrone Rips Up Cats Kang there are local dogs in your area being killed all the time and you're concerned about a dog in America being locked up in a most likely air-conditioned camper all day
Tyrone CatKiller Kang when’s the last time you had your ass whooped
My brother has a welding rig like that
So does.my mom
You wouldn't have happened to be at bass pro in kansas a few months ago would you?
Nope! Wasn't me!
Zachariah Lawson well it said just passing through and looked just like this sooo
Nice to see a real truck rather than a 100,000 rig that Daddy buys his little Boy
Right.....
What symptoms did you have with the old armature to know it was bad?
How do you survive in the winter
You said you have a ground clamp for stainless? Just curious to why you have a separate one.
Jake McLeod
Eres untotonto
Lonlamento
where did you get your lead reels,or how did you make the insulated swivels for the leads
Just seen this video. You said you were from Missouri, what part? I'm from south east mo. I was wondering how you got into pipelining and any advice you could share. Thanks
Yeah! Not a problem I currently have a list of things to make a video about and I will put that on there for ya! And i'm from Springfield.
Zachariah Lawson get thanks for the quick reply man. Looking forward to seeing them.
How'd you build your lead reels?
What town you in?
What type of truck are you running I missed that!
It’s a 2007 Dodge Ram 3500 with the 5.9 Cummins 4x4 and 6 speed Manual transmission.
Zachariah Lawson hey thanks man just saw the trucks description in the posting. Lol but another question do you run 1/4 or 3/8 oxy acetylene hoses? Also what size welding cable and whip?
How much weight do you pull of the gooseneck behind the axle? I am building a rig and need to move the hitch behind the axle but everyone says it will ride bad and will not work.
HolisterProductions I pull a 36 ft 5th wheel camper. It’s 12,000lbs dry and I have it pretty full with everything I own. It doesn’t pull bad at all with the hitch behind the axle.
Thanks for the info
How much does a 1 ton diesel weigh after installing the bed and all the equipment for the job?
Depends on the amount of tools, type of machine, and what thickness of metal you use for the bed. I haven't weighed mine, but ive heard they weigh in the ballpark of 13,000 lbs
at a glance the truck seems to be nice . but the camera is too shakey to tell almost made me dizzy
Yes 👍 👍 👍 👍 👍 👍 👍
Why do you need a ice box lol
Perfect example of a construction roady as they call em on jobs during shutdowns and such
what games do you play on ps4
What made you go with dodge?
Logan Cieless because of the Cummins. It’s easy to work on in a bind.
Where ya hail from?
it needs paint
I tack my weld test to the back. If I painted it I couldn't do that anymore! I am also always changing little things, ill never be 100% happy with it!
Nah. Awesome petina ... Never paint it 👍
@@ZachariahLawson wpuldnt get away with that in the northeast salt would chew it up quick
Flat black rattle can !!!
1:03 🐶🙂
Looks like your in monahans tx
Actually the whole state looks the same do why assume that
@@jerrybrandt9377 ...No it don't!....A BIG difference between West and East Texas
He is definitely in monahans
Nice.
Hi my name is gee and I was just wondering if you needed a welder helper or no anybody who needs one or any company's who are hiring for a welder helper
I currently do not need a helper. You could try Googling oilfield jobs in West Texas. There is a lot of work out here.
Ok thank you what if I don't have certification for welding but I have experience
They post welding, helping, and labor hand jobs on the internet. I don't have any certs either. When you test for a company they give you certs for the gas company you're working for. Usually they last 6 months before you have to re-test.
Wow ok I didn't know thank you so much for your help now I'm gonna leave you alone and stop bothering you I really do appreciate it
Hey, no problem! Feel free to ask any more questions if you have them!
👍 👍 👍 👍 👍 👍 👍
New subscriber. Hello!
Those sheetmetal screws are dangerous as shit.
What tires do you run on the truck?
Right now I have Nitto exo grapplers, 35 12.50 17
Nope, won't cool down until end of October
I HAVE THE SAME TRAILER!!!!!!!!!!
Its a good one!
No paint on bed typical
Hell I'm from Kansas
Beautiful red face.
Lol musket
check my first welding video on my channel too lol.
Why not paint it??? If you do something, do it right. Plus, having it rusty makes employers think you are in it for the short term. Just my opinion though. Nice bed.
Haha...
cut the tip off. yee yee
You are all over with the camera. That's why people won't watch your channel.