How To Replace Headlights 2007-11 Honda CR-V
HTML-код
- Опубликовано: 5 окт 2024
- Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2007-2011 Honda CR-V.
• Check here for more videos on the 2007-2011 Honda CR-V • Honda CR-V 3rd Generat...
This repair was done on a 2011 Honda CR-V EX 2.4L Sport Utility 4-Door and the process should be similar on the following vehicles:
2007 Honda CR-V
2008 Honda CR-V
2009 Honda CR-V
2010 Honda CR-V
2011 Honda CR-V
Tools you will need:
• Phillips Head Screwdriver 1aau.to/odS/1AX...
• 10mm Socket 1aau.to/ocY/1AX...
• Trim Tool Set 1aau.to/oaY/1AX...
• Gloves 1aau.to/oK/1AXS...
• Safety Glasses
• Pick 1aau.to/oam/1AX...
Subscribe: / @trq
Check out our playlist:
Honda CR-V 3rd Generation 2007-2011: • Honda CR-V 3rd Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
This is an excellent video explaining all the steps. I just changed my CRV headlights, I am not mechanically inclined. It took me 2 hours going slow. My advice, you should get a new set of bumper fasteners (about 10) because when you are removing the bumper many fasteners are bridle and cracked by time and vibration. Second, spray DW-4 on all the nuts 5 minutes before you try to remove them. Most of them are rusty. I did my work on a flat surface, I don't have a lift, so get a chair and something soft where you are going to place your knees.
After watching your video twice, I ordered both headlight assemblies and did the installation in an hour. Great instructions.
This was one of the best car repair videos I’ve seen!!! And I realized my car is 90% plastic!
Thanks. With this instruction I replaced the headlights on my daughter's 2010 CRV today. I'm sure her and my grandson are much safer now. Thanks again and Happy 2024!
+@pluckypurcell7186 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
I have to remove the whole goddamn bumper to replace a lightbulb? Good lord Honda, what the actual fuck.
Surprised honda made this so difficult. Thanks for the video
Well done video - thanks for putting this together. I just replaced my CR-V headlight assembly with no issues.
OK, they're cloudy, I'll live with it or polish it. This is nuts!
Great video!! Only one thing, always check the function of lights before completing assembly. 😊
I thought I was going to do this myself......LOL! Not any more!
Who dreamed that up? Oh yeah, this is about having your dealer do everything.
Totally ridiculous....headlights should just pop out with just a couple bolts. Not dismantling the front end of the car.
I probably saved at least an hour and lots of broken plastic by watching this before I started the project. Nice job!
All necessary info, without bs filler content ! Very cool, thanks !
Y’all.. this video describes removing and replacing the entire headlight assembly. You can replace the light bulbs with the assembly in the car. The indicator light is pretty tight to get to, but it’s possible. It’s very easy to do the main headlight/high beam bulb. I did it just now with the assembly in the car.
Thanks for the video
This is psychotic. I changed the bulbs in my Toyotas in 8 mins! Even my old stupid Volvo was a breeze.
This is the best video for headlight removal I've seen yet on RUclips. Many thanks!
Dude forgot to take the engine out.
Thanks for the video! Very helpful with my install tonight!
Take off this 50th bolt.... And this 200th trim piece. 😅😂
Thank you very much for posting this. I now feel very confident I can do this.
Great video! Took me 4 hours with a friends help. Buy extra plastic trim pieces. They will break very easily.
This is an excellent tutorial. My next project. Thank you 👍
Thanks for the video! Changing the headlights was a lot easier than I expected.
Thank you so much,it was simple and straightforward, I just changed mines today❤👊🙏stay blessed.
There are other videos that show how to just change the bulbs and not the whole housing. You don't have to do all this just to change the bulb.
I miss the good ol days when you could remove 4 screws and pop out the round headlight.
Mine are in great condition on my 2008. So I can just replace the bulbs?
Glass headlamps are the best. They last forever as long as they dont get hit by a rock or simular object. The plastic headlamps ruin the look of a car in just a few years because the turn yellow. Plastic headlamps illumination of the road gets worse and worse as time goes bye. Glass head lamps can withstand soap and harmful ammonia from windex without dulling and turning yellow. Windex yellows plastic and makes it brittle. Glass headlamps can be molded in to any shape that plastic can be. Glass is 100% recyclable. The only draw back is glass weighs a little more. I know people that have yellowed plastic headlamps and are afraid to drive at night because of the lack of safe illumination on dark unlit roads at night. Plastic Headlamps and Rubber timing belts should be banned in up coming vehicles.
I had a 95 wrangler before the Honda I have now. Very disappointed to see the amount of work involved just to change the lightbulb..
I just replaced the lamps in my F150…..thought I could do the Honda as well until I saw this video….come on Honda
Great video.
Nice job 👍❤️ I like that Way that you explained
Thank you
Great video! Thanks!
Really good video
And they wonder why the dealership service centers are nicknamed stealerships lol.
Changed turn signals, and headlights in about 15 minutes without a single screw removed just a couple months ago....
At my local auto store you pay them 20 bucks when buying headlights and they change the globes for you. I'll make sure to show them this video 😅
The only thing that feels unrealistic is how easily he pops off those bitch clips without issue 😂 I'm at the point where I've just accepted that I'm replacing with new ones because they're so difficult to work with
What was Honda thinking?!!!
I wish the bolts were easier to see in reinstall mode where I am.
2 mins in and its already too many steps for me to feel confident about doing it myself xD everyone has told me its easy but those angles are tight and i dont know where any of those tools are. Sad thing the only men that want to help me dont want to teach me anything they just want to do all the work themselves and not evn give me a chance to try my hand.
Was hoping i could use my bare hands to pry some peices off and slap it back on xDD
This looks unnecessarily complicated
Omfg! My hands barely fit to put back in a new light and the front has to be dismantled
This is completely unnecessary to change your bulbs just to let everyone know
@Heather Fox Just open the hood and replace them by pulling out the plugs. I just did it
I was going to do this but I think I'll just buy a new car now. This is ridiculous....
2008 Honda CRV you pop off the fuse box to replace drivers headlight. This is total bull shit.
@tmonsterism… I thought it was just headlight change not all this bs? Like everything else I’ve read- EVEN THE MANUAL- doesn’t say to remove the bumper… 🤔
Wow I like Chevy
Honda last longer
…
99. Disassemble the engine.
100. Remove the headlight.
🤦♂️
S*** I put on learn how to do all that...!!! I can actually work in the shop shop 😅
Plastic snap together cars.....ugh
🤯🤯🤯🤯🤯🤯🤯🤯
Whoa. All that is not necessary. Thanks though.
Yes. Very strange
Older Honda CRV are known for having headlight assemblies that have faded, clouded over and no repair works so the entire assembly must be replaced. He is not taking the assembly apart just to replace the bulbs!
What a horrible design! Never thought of it! NO MORE HONDA FOR ME!!!
Very though