NISSAN 350Z AUTO TO MANUAL TRANSMISSION SWAP HOW TO!! PART 1 THE TRANSMISSION PART
HTML-код
- Опубликовано: 14 окт 2024
- Ive been asked to do automatic to manual swap on Nissan 350z and G35 and so, HERE YOU GO!! Part 1 The transmission part. Ive decided since the videos are roughly over 20 mins, viewers like you can now more easily find the exact part you need answers to by searching the category. Either transmission or Part 2 will be the pedal assembly and hydraulic side!! CHECK IT OUT!!!! And for those who have inquired, 🤙
PARTS LIST NECESSARY:
-Cd00x Transmission -Manual Driveshaft -Pivot Ball for Shift Fork -Shift Fork -Throwout Bearing -Slave Cylinder -Clutch Pressure Plate -Clutch Disc -Flywheel - Flywheel bolts (8x) -Pilot bearing FOR manual -Slave Stainless braided line to hardline - Hard line from Master Cylinder to slave line (on drivers side front wheel well) -Clutch Master Cylinder -Clutch Pedal -Manual brake Pedal -Shifter WITH spring and plate to bolt to transmission w/3 bolts -Rubber shift boot to cover trans tunnel -Cloth shift boot -Shift Knob -Manual Shifter trim
G35 WITH FOOT PEDAL E BRAKE ALSO NEEDS:
-Removal of Foot brake -Hand ebrake - Ebrake cable for hand brake (from manual G35)
-Center Console for Hand brake (from manual G35)
My Instagram: @the_crooked_king
Literally dm'ed him less than a week ago about tips and tricks for a swap and he drops this video, actually mind blowing. thanks aaron, hope u droop part 2 soon. i appreciate it
❤❤👊🏻 PART 2 out tomorrow🔥 Thank you my dude, and thank you for the love and support💪 Im sorry if I lagged on getting back on a DM I try to get back to everyone, just busy lol all love brotha
Sorry to be offtopic but does any of you know a way to log back into an instagram account..?
I was stupid forgot my password. I love any tips you can offer me.
@Gregory Braylen instablaster =)
@Gerald Wesley I really appreciate your reply. I got to the site on google and I'm in the hacking process now.
I see it takes quite some time so I will reply here later with my results.
You just relieved so much stress off my shoulders bro! Iv been trying to find a video that’s this specific and helps me just like this! Haven’t found a single video where they tell me exactly what I need and then the install!
Haha HELL YEA!!! Glad I could help!!!! ❤🙏💯💪Get it my dude and if you got other questions hit me up on my Instagram DM me!!!!
I found one of those transmission forks when I was younger a thought it was an ice scrapper. mystery finally solved xd good vid💯
😆😆😆😆 def mess your window up LMAO, thank you so much!!❤
Great video! The AT pilot bearing kicked my a**. I bought/ returned / bought bearing pullers that all failed. Then , the bearing puller I rented flexed too much and would come out on the 2nd /3rd hit. I had to tag in help to get my pilot bearing out ... I'm also convinced that I need my own shop space for my hobbies. Keep putting out quality content.
Isn’t that Gustavo’s car?😂 never mind you said it right after the intro 😂
Lol Yessir it is🤙
That's awesome that little bro got all his stuff together to swap it , get part 2 out soon
I’ve been waiting for a video like this! I’ve wanted to swap to a manual for a while now but had no clue how to go about it
I hope it helped🙏🙏Let me know If you have any questions about it, you can message me on here or DM me🤙❤
ngl been watching some of your vids and your intro was a banger.
🙏🙏🙏 thank you so much!!
I know I’m late to the party but you have saved me 🙏 much love bro
LOL better late than never...💯💪🙏 appreciate that man, much love always💯🙏❤
Hi Aaron, I'm looking into doing the trans swap and I would need the ECU mod, is there any information you could share with regrading the guys that do this upgrade, maybe share with me the contact and thanks again for such an amazing content you are throwing out there for our community.. Hands down brother!
This video helped me swap mine. You saved me tons of labor money thank you!
Great to hear! Youre welcome brother!!!! hell yea!! much love🙏❤
@@Thecrookedking15 how much is the conversion?
Good video, I love how you explain every detail, I have never found a video like this that explains step by step I look forward to the next video I don't care how long the next video is, you have all my interest, good job🙌🏼
🙏🙏🙏❤Thank you Thank you so much!!!! Appreciate you, all love🤙
Glad to see the lift working 👌🏻🤙🏻🤘🏻👍🏻
🤦♂️About time right, LOL😂 thanks for noticing....... lol
bro i didnt know you had a youtube channel LMAO subbed fr tho
Haha yessir WELCOME!!! and Thank you brotha🙏🤙❤
Comment before the video because I know it’s going to be a dope vlog.
MVP🔥❤appreciate you brotha, all love
Love the channel fam u and myke are my inspiration with this car shit my guy blessings your way hope ta drive wit y'all one day
Thank you brother🙏🤙your support keeps us going , appreciate you, much love💪 ❤
1000th like keep up the content!!!, also thanks for showing and describing the swap.
Those ratchet wrenches are amazing we got a set too
RIGHT?!? lol hell yea Love them💯💪
That’s what’s up bro good looking out on showing how to do it. Btw happy New Years!
Happy New Years bro!!!! lol glad you enjoyed it, Thank you so much🙏❤ all love always
Glad to see the lift is finally working. I’d hate to swap a car on the ground.
Gah its the worst😒im spoiled now with this lift lol🤘🏻❤
I did it on jack stands wasn’t hard at all.
About time to get ride of that there is no feeling of shifting gears and being in control of your car its a feeling only so few know keep doing ya thing and I will hit you up to do some work on my mustang just don't tell my wife lol I have a feeling with your info and mikes and mine we can make my mustang one of the fast in my country 😉
Haha for sure man, Thank you so much!!! Keep me up on the progress!! all love brother
Yea looks like ya are good guy and hella fun to be around the next time ya buring tries let me know i would love to stop by and check out your guys shop if thats even a option
Great video. It's that the csc delete kit?
Thank you!!!
U think u can make a list of every thing we need for the swap Ik u laid it all out in the video a list would be helpful tho thxxx
DONE!!! all love brother THANK YOU THANK YOU🤙🔥 Check in the description of the Video👊🏻
Ok i have a rev up motor with low miles but the motor is blown. I got it like that. I have a vq non rev up AT. I want to put my 6mt into my vq. Can I re use all the parts when I swap. ?
Pedal Assembly next please! im having trouble with my brake pedal lol
Finally swapping to manual😂
😈💯yessss!!!
Hell yeah the Guru at work 💪🏽 Man I need to bring my Q50 down so she can get some love 🙌🏽 an bring yah some work 💯
Come on down, would love to meet you as well, show you the shop etc, much love brother!! Appreciate you❤
@@Thecrookedking15 Bruhhh hell yeah thank you for putting out the content im definitely going to have to come though an kick it tuff 🤙🏽
Mean vid bro good work
🙏🙏👊🏻thanks my dude
Hey man i was wondering what was the total cost of this conversion? Thanks!
Hey Crooked Crown...I have a 2004 Zzz with a VQ35 DE automatic. Where can I source these parts to do the conversion? After driving with the automatic, get kind of boring...even though in LA...heheh. Are you in California? There are several videos on RUclips with this conversion, your video, was easy to watch....step by step! Like to hear back, your thoughts Sincerely..thanks! New subscriber 🏎
WELCOME my brother and thank you🙏🤙 Im actually from southern california, Valencia actually but located in Nor cal in fairfield ca now. I sourced a lot of my parts just from pick and pulls and yards with nissan/infinity. ebay is also good for getting parts because they can ship to you from anywhere in the country. Hope that helps, hit me on my dm on IG if you need any other help. all love
Hey man would love a link to your IG in your video descriptions im sure we 350Z noobies all could use some advice/help
Done! Thanks for the suggestion brotha💪
Great content Aaron
Thank you brother🙏🤙
Great vid, very detail 🔥🔥
🙏🙏🙏❤ thank you!!!
This is why I'm subbed. Nice.
🙏🙏thank you my dude!! 👊🏻
Oh man getting the old automatic pilot bearing out is a pain!.. when you don't have the right tools 😂
Bruh seriously, even with the right tools, still fights 🤦♂️
True 😂 bloody pilot bearings
Can you list all the manual swap equipment cause I wanna do the same thing plz
I laid it out in the video but Ive gotten that question more than once so that might need to happen....
I tallied up all the parts on eBay new and used and it comes out to $1600 with tax and shipping for everything here except the clutch pedal which I’m looking for now. That’s with a new trans.
Thanks for you work! My 18yr old son and I are completing a swap on his 08 350z and are at the crank/ no start stage. Wondering if it's essential to swap the ecu to manual (it's currently still auto) and what other wiring we may have missed. Thanks!
Hey I’m so sorry to just be getting to this man!! THANK YOU THANK YOU so much. And no it’s not necessary for you to swap. And auto works as long as you jump the wiring like in the part 2 video💪🏼🤙🏼 hope that helps man. Can’t wait to hear about it being done. Much love always❤️🤙🏼
@carsten-qr6xt Did you ever finish that swap on your 2008 im trying to do my 2009 350z in the next couple weeks
Got it done! Struggled with the wiring a bit but everything else went smoothly.
@@carsten-qr6xt what did you have to wire? I want to get into this swap but soon as i hear wiring i get intimidated lol, how hard was the job?
The only wiring is splicing into the wire that controls the park neutral switch so that the computer allows the car to start. The mistake we made was cutting the wire rather than splicing into it as the video demonstrates.
In doing a manual swap on my g37 . Would i be better off using the ecu and remove NATS, or buy an engine harness for manual and require the whole thing ??
G37 is different for me tbh, I think you could use the ecu and jump the "park" switch to allow it to start like how the z was jumped terminals by the battery, I am not certain tho, havent done the g37
no you dont need swap the ecu you can use your
what about replacement of the automatic harness to a manual harness? Getting check engine light.....
"wiring"
Hell yea man good for that kid!!
❤❤❤
Don't know if you'll respond but is this the same process for a g35 like all the same parts you explained in the start of the video and where all the bolts are mounted and coolant lines
Yessir. 🤙🏼I haven’t found anything really different except if it’s a sedan with a foot brake ebrake you’ll have to remove it for the clutch pedal. If you got questions dm me on ig @the_crooked_king. I try to respond all the time. Much love man
I have been looking at a z for a while I rlly want a manual but I could easily get a automatic z for lower miles and cheaper price I am in high school love to learn and I am thinking about getting a automatic and maybe doing a manual swap u think I could do it by myself? I think I could probably but not sure sense I have never done it only think is is I don’t have a car lift
What is the man time for this? Is this like a 2 day project or can it be knocked out in one day
Can this guide be used for the 2008 350z. From factory the 2007 and up have a JK41B 6 speed.
Clutch disc is a top hat. Put the top hat on the engine
Do you know when swapping a 350Z HR from Auto to manual is there a way to turn off the service engine light because mine popped up I did not swap the ECU to Emmanuel one I have a manual ECU but I have not plugged it in do you think plugging in the manual one will turn it off
Very helpful video
Glad to hear that!!!!! If you have questions you can def hit me up on here or my Instagram and I try to get back to everyone !!! 🙏🤙💪
I don’t even got a z and I watched the whole video 😂
😭😭❤🙏🙏🙏🙏🥰Appreciate you So much man Thank you🤙 All love man
If i was looking to swap my transmission do you think i should do it myself or have it done somewhere and if so should I go to some sort of specialist or can almost anywhere do this
So the vq in the 09-15 maxima can be manual swapped, no one has a video on RUclips doing the build would love to see you pull it off an help me do it on my own maxima
How much should this cost? I want to swap my M35 transmission.
Will this work on a G35? I assume it will, but I had a shop tell me I needed the motor and trans combo and ECM. Not sure why I needed a motor to match the manual transmission
Definitely will and no motor needed. I don’t understand that either lol just the transmission and manual stuff💪🏼
Aaron why is that slave cylinder braided line so short compared to all the ones I’m seeing on ebay? Thanks -T
so there is a hard line factory that runs from the master down under the driver wheel well cover and to the trans area on manual g35/manual 350z, the customer bought that hard line and then we just put an upgraded slave cylinder line from the hard line to the slave. If you get the one from ebay or amazon or something like that, the long braided line cuts out the need for the hard line and goes directly from the master to the slave🤙
@@Thecrookedking15 Thanks I figured this out after more research.
can you explain more of why you changed the eco?
Are you able to do this for my car? Just started buying parts for my manual swap but wanted to find someone who could do it properly.
I can, and would love to help you!! Let me figure out shop stuff first to make sure there is space and availability to do it and Ill get back to you!! Much love man!!
@@Thecrookedking15 sounds good man ! It’s no rush right now I haven’t been able to get my hands on a cd009 trans and I’m slowly stacking up on the other parts.
What’s the charge for something like this?? Very interested
Dm me on INSTAGRAM and we can figure it out💪🏼🤙🏼
So is changing out the drive shaft neccessary I've watched some other videos and they didnt say anything about it?
They have different lengths 🤙
Do u know where he got all the parts from because there’s a lot of parts and I can’t find all of them as of now been looking into it for months
Would it cause grinding issues if the automatic bushing wasn’t removed ?
after swapping the trans did you get the U1000 code? im having that problem, i bought the car swapped so idk if the ecu was programed
Yesss that code is a communication code since the ecu was programmed for the swap
Hello, I have an 06 350Z, which is VQ35DE 5AT, 280hp, I'm going to a single turbo on it, with Transgo kit, I got few questions and since I live in Brazil is veryvery very hard to see people who understand of this car, even on forums like my350z
My biggest problem is the transmission, I was looking for another transmission to put in, but in Brazil we pay 100% import tax over the product + shipping price, so if 2k usd for the cd009 + 500 shipping I pay 2500 + 2500 usd.
Usually people wage here is 120 to 200 a month, of course I'm not like those peoples but I'm not rich if I put my money in USD's
So basically I have 2 questions to know where should I run:
1- Any other transmission that I could find to swap even if I need adapt few things? Like Nissan Frontier 6MT? Which year could be good? Or any other?
2- How much power can the 350z 2006 5AT transmission handle with Transgo? I was looking for 500whp or something close to it, you think the transmission with transgo will handle that? Or should I jump for a swap ( but there is not even one 350z transmission to sale in whole Brazil )
I'm sorry for taking your time but I had nobody else to ask those things...
I'm not the creator but see if you can get a T56 or LS based manual transmission. There are a lot of swap kits for putting those into Zs and some manual Z drivers swap those in because they are stronger than the CD00A in the 350z.
I have an auto Im not swapping my transmission yet but I am putting a new de in and I noticed that there was no pilot bushing?!?! Idk what to do im stuck lol. No one talks about auto cars🥲
No pilot?!? there isnt a big aluminum one pressed into the end of the crank?
Question.. so ive heard that manual from factory is better than tranny swapping it. Is the true or does it just depend who does it for you? cause I have a 350z but i want it manual
how much the swapped cost this video is 🔥🔥🔥
Thank you man!!❤ about 1500 In parts and I charge 1100 for Labor 🤙
@@Thecrookedking15 $1500 in parts!! My list tallied up to $6900?!?! :(
@@funnycovers5543 what is that all new OEM parts? I’m at 1600 minus the clutch pedal and hardlines.
Where you located, i want to manual swap my 2006 g35
I got an AT trans light after my conversion, is it because the car is not able to sense the automatic gearbox? what should I do about it
Did you have to swap out the pilot bushing ? Or did you run the auto one ?
Yessir you HAVE to switch the pilot bushing🙏🤙
@@Thecrookedking15 how did you go about the neutral safety switch?
Ok so my car is at the mechanic right now and it needs a new engine. Can an engine from an auto be used with my manual transmission and be made to work?
Yessir. Same engine. Just change the pilot bearing to the manual trans pilot bearing and everything else works normally
@@Thecrookedking15 mine is an 06 manual. I think I read on the forums that its not the same for the 06 manual rev up.
@crooked crown motorsport I have a question can I use the ECU out of any Manuel z
Yessir just need the nats flashed off it, so the immobilizer doesnt stop the car from starting🤙
What type of grease do you use on pilot bearings/input shaft/throw bearing
High temp bearing grease💪
Hey so if I changed out the ecu and engine harness for an MT harness will that allow me to have the reverse lights and clutch safety switch as if it was stock? Or do I still have to wire stuff.
can someone please tell me what grease or lubrication he was using
Hexa Garage can do nats delete? How do I get in touch
Hexa motorsports on Instagram and talk to Jorge or Jake, rad dudes and super knowledgeable💪 They are located in santa rosa👊🏻
Do I need to change the differential or can I keep that auto?
You can keep the auto, that doesnt change❤
What was that gustavos video?
Is the clutch hard line different on right hand drive 350z?(uk)
I believe It is but dont have a definite answer for you, ill have to check that out🤙
I'm swapping and manual trans from an 08 to a 07 Z are the engine harnesses different?
Nope should be the same🤙
@@Thecrookedking15 is a manual harness a plug and play onto an auto engine? Sorry this is my first time im going to do something like this so wanna make sure I have the right parts
@@Conker999 the engine doesnt matter as long as the 02 sensor plugs are the same, however the manual and auto harness are different plugs for the transmission, the engine will all plug in but when you go to plug in trans if you have manual and have auto harness or vice versa, the transmission sensors wont plug in and you wont have some functions of the car, like reverse lights etc
@@Thecrookedking15 okay perfect that I have the manual harness then I should be straight. I'm going to replace trans internal slave cylinder and upgrade the clutch while I'm doing it 👌 thank I appreciate you
@@Thecrookedking15 So you need a complete wiring harness from a manual as well? Sorry for all the questions.
How much was the total cost of the swap ?
About 1500 for all the parts and I charge 1100 for the swap🤙
Can I use the ECU from un g35 is the same year ?
When Swapping Do You Need To Swap Ecu From That Engine To A Car That Came With Manual ??
No you don’t. There’s a wire you need to splice on the IPDM that will trick the car into thinking it’s always in park to start. I’ve done this to my Z and never had any problems. This is the link on how to wire it
my350z.com/forum/engine-drivetrain-and-forced-induction-diy/552038-5at-to-6mt-swap-info-diy-guide-thread.html
Never realized how many parts go into a manual transmission 🤯
Right?!? lol 🤦♂️more than I thought initially too lol
can I get someone to take off NATS from nissan teana j31 ecu please.
he should swap in a manual diff as well autos use 3.3 manuals use a 3.5 or he could throw in a 370 3.7 diff
My clutch will not pop all the way out
how much did it cost him in total?
How can i manual swap with a vhr trans on a g35
Man I can’t find anyone in socal to do a swap for me ! No shops want to do it lol
There’s a few in socal.. i can give to their instagrams. Im Gonna end up doing it myself
@@VQDNZ ya bro if you can I appreciate it
Aaron let me get that auto shifter till I go manual hahahaha plz I'll pay shipping
lol I dont have it anymore man sorry......
@@Thecrookedking15 😢 lol it's Kool love ur videos man
How much did you charge him
People keep telling me to just trade the car in or buy a new one. I ain’t giving up that easily.
Anyone know where I could get a manual crossmember?
I have one if you need it
how much was it in total ?
Is that Mykes z
No, Gustavos 350z, the dude mike transformed for him and surprised him with❤🤙
Can i take my 350z to u so u can do. The same job on mine??
Yessir, Bring it on down!!! 🙏🤘🏻
@@Thecrookedking15 where u guys located
How much is it ? I’ll bring all parts with me
@@georgegirbis2301 In fairfield Ca
@@georgegirbis2301 I charge $950💪🤙
What's the torque for the flywheel bolts?
64
20:04 that's what she said
😆🤣🤣🤣🤣😆💯
🔥🔥
❤👊🏻🤙
Thank you daddy
how much does this cost
For all the necessary parts its around 1500$ and I charge 950$ for the install🤙
@@Thecrookedking15 soooo this is something I can just pay you for? 😂
Zlife💯💯💯
Yessir, definitely about THAT life🔥🔥🔥💯💯 and so are you!! Keep me up when its done, shes looking 👌👌👌 much love