How To Yard K Series K24a2 TSX 6 Speed Swap Removal
HTML-код
- Опубликовано: 1 окт 2024
- Ive pulled many TSX engines in the past but this was the first Ive gotten one with the rare 6 speed manual transmission. This video was brought you to by a very special guest editor Mark of Honda Street Garage RUclips channel. He does amazing work and Im happy we have teamed up with him. Please check out his other great video. His channel is linked below.
Honda Street Garage RUclips
/ hondastreetgarage
Check out our Webiste.
www.hushperfor...
Follow us on Instagram
/ hushperformance
Like us on Facebook
www.facebook.c...
My guys thanks for uploading this great video. I am on the hunt for a TSX at my local yards and this is so helpful as I have never pulled an engine in a junk yard before. I hit the like button 3 times!!
Thank you!
Wait the fuck up! You are able to park your truck inside the yard!!!😯
5:00 Most of the time when I am at u-pull yards I will do that to disconnect the axles rather than dealing with the main nut. The longer you take getting stuck on something, more likely someone will be waiting for you to walk away and get it for themselves. Feel bad because I did it to a local guy who got hung up removing a crv trans cause he didnt know about the one hidden 14mm on the bell housing. Besides I view axles as disposable wear items anyways and brand new oem styles ones are cheap enough.
Is that true that this transmission casing it's made of magnesium
Jump on a 3/8 stubby impact from Milwaukee its got power!!!!
Wow the manual tsx. The diamond in the rough.
What a pain it would be to do a clutch job on a tsx chassis!! Awesome video tho! I'm surprised the impact didnt get those axle nuts off tho!
Instablaster.
It was 35 hours without powertools with my mate on my CM1 Accord (1st gen TSX, but 2.0 and Tourer). Didn't need subframe out, but was tight on space
Love your how to yard vids. I do got a question I am going K series(k24a2). Most likely I think I might go with OEM engine harness is just a TSX the only harness I can use or is there another alternative as well
What’s the name of those steel toe shoes?
Rob this is a great video, Where can I purchase the lug nut removal tool that you used to remove the wheel lock? I need that electric impact in my life still working with hand tools LOL! Gonna try my first engine removal on a TSX in the yard. Thanks, keep the content coming!
havoc010101 I got it from snap on
yea boi!!! DENVER, CO in the mo' fu**in house!!!
How much did you pay for the transmission?????
1400lbs my ass! Not even half that! HAHAHA!!
Always look forward to these how to yard videos!
Just pop the hood off 4 bolts/nuts, to really be safe😊
Dang bud. Super awesome info! Appreciate your time
Nice score. Interested to see the clutch. Lisle also makes the hood prop rod part# 46170 👍
What tool did you use to take off the locking lug nut
I was just rewatching your videos yesterday!
Great update!
Good that you think about your safety...
you gonna spend the night
That Milwaukee impact gun can take that axle bolt like nothing the problem is your battery it's a low input you need to get a Milwaukee high output xc 8.0 battery and up for heavy jobs.
Another great pull, hey one thing the video this time seems to be dipping down to 5-10 frames per second making it hard to watch for some scenes. I know its not the camera so you may want to check why your post editing is dropping frames.
Noticed it as well, not sure why it's doing that. may need to re-upload if if keeps it up.
Make a like of the tools you think we should take or a video I know all the power tools but hand tools too like a junk yard bag looking to make one solely for the junk yard would help
Is there a 2008 k24a2 engine I can put In my 2008 si for state ref?
My rsx has wheel keys just like that when I got it so I kept using them and one day it broke and I couldn't find a replacement anywhere so I ended up getting old sockets and beating them on to the lug key to get them off
Would this long block and trans work on a 02-04 rsxS engine harness? for a integra.
If it’s a 2007-2008 tsx the ecu does work with k tuner or hondata flash pro
Is it just me or was the video lagging a bit it kept dropping fps and I thought it was my phone and then I watched it on my Xbox and on my computer and it was doing the same thing
your videos are the best Robert I just actually can't wait until you make a brand new series of how to yard with brand new videos because I just actually always learn something brand spankin new from your videos bud and definitely love from your best Nabour To the North of you Canada because I definitely did subscribe to your Channel brother like wow just keeping on comin buddy
Nigel McCure thank you very much
@@hush22performance1 ya your totally welcome brother because ya did definitely subscribe to your Channel same thing here as VTEC Academy both of you guys have great vids but bro you gotta start coming out with brand new content very soon here bro
@@hush22performance1 plus when I need Parts I know where abouts I'm going to you guys
Hey bro if I would wan a 6 speed transmission how much u think that would cost me ?
try tightening the axle nuts aswell! so like in and out and ur impact! usually breaks them free
i looked at 03-04 accord they didn't have the cable
I want to speak to you i have some cuestión.
I never liked the exhaust pipe under the engine.
«Very rare 6 speed manual». Funny! Here in Norway the manual is the most common ones. I currently have a 2.2 diesel wagon with 6 speed manual
Tsx 6 speed is rare.
Bad ass keep the vids coming 👍🏼
Jay One 2 thank you!
Hey Robert i have a question. Is it possible to use k24a2 cams on a k24a4 head, will VTEC work normally like in an A2 head?
KSWPAE86 i think you would need to swap the k24a4 cylinder head to the k24a2 head for that to work. Im not sure if just switching the camshafts would work though
Aside from small exhaust and coolant features on the block and manifolds, it'll bolt up fine, vtec should work fine too. Still wouldnt do it tho, use a k20 head witht he k24a2 cams. Way more info and swap parts available and you'll likely make way more power.
James Mulvey i am in the same dilemma. Im working with an 04 accord 5 speed and just want some more power without going full race car. So basically i can throw in the camshafts from the tsx into my accord and everything should be fine???
@@enginehead9966 sure can I believe, most of that stuff is like Lego. If u want to rival the tsx on a budget Go to a junk yard and get some tsx injectors ( rail may not fit, but no harm in trying),intake plenum and throttle body. (The part connected to the throttle body with the big bubble before the runners, not the 4 runners, also connector for tb may not fit from tsx to accord so you may have to use the accord one, not sure), a Hondata or other tune (there's another one on the market that's supposedly better now, do research), and a set of cams from a tsx. Get it tuned ( pricey), and you'll be hanging with the big boys. I actually put an accord 5 spd in my tsx because the ratios and final drive was better, its a good tranny. Beware tho the accord internals are a little weaker than the tsx's, but not by a ton, so id be hesitant about goofing around with launching, rev limits, fuel and spark timing, and vtec points and timing, it gets risky and I toasted the valves on my 07 a2 and had to swap it out for an 05 a2 for the time being 😷😷
Just a Question if I pull one of these my self can I swap everything as a whole in a 88 crx? I'm new n this will be a big start for me thx.
How far and where did you go this time?
Jose Contreras 1300 miles around trip.
@@hush22performance1 wow,great score and worth it tho. I use to think driving 3hrs was extreme🤣
I complain when I travel over 60 miles, what the heck?
@@impactajuvenile 60miles is about the furthest yard i would go to but usually the one worth it.
Jose Contreras I know right? Have you had any success with finding AWD, K motors, or performance parts when you yard? Seems like Hush and YoungStatic are cleaning it all up in the USA??
ight i see u have a fb page can i massage u there instead ?
Who makes that wheel lock tool? Anyone know?
When watching your yard vids, I'm always curious how much you pay. So? Lol
itsjussjerry most junk yards have their prices listed on their website.
Cool engine
Damn! 140k! Prob owned by someone 40 plus. Good score Robert! Nice video!
Patrick Candler - Trying to figure out how 140k miles = to 40+ owner age? Not saying your wrong by any means, just curious.
@@BucketList22 garaged as an extra car. Like the guy I got my ep-3 off of. Dude had three cars and his wife made him sell one. What I meant by that is everything nowa days is so replaceable that nobody takes pride in what they own anymore. Hence why I assume an older person owned it due to the condition of the interior alone. And it's all stock.
nice hoist.
I love your how to yard videos👍🏻
heyy bro so u aint wanna sale that transmission i have a tsx auto i have plans to turn it to manual any how u can help ?
The trans is for sale. We put a brand new 1-4 sleeves, sliders and synchros. Please call only for for quote. Our number is linked on our website.
or do u have like one website where u have everything listed on ?
Love it!
should keep a hand held torch with you some heat and that axle nut wouldn't stand a chance
Torches aren't allowed in the yard, at least not in Georgia
Cyclecar think that’s right across the USA.
Can rsx 6speed bolt up to tsx
Mike The trucker yes
you should have skip taken off subframe, its not needed unless you were planing to drop the engine with frame, but in this case you pulled from top. thanks for the video.
They must give you a special hook up at that yard if you are able to drive your truck to the car.
Hood prop is cool. Removing the hood is a free alternative method.
It was a special day.
Depends if you want to work in the sun. The point was the tool rather than this specific pull.
What kind of shoes are those?