Finally found a tutorial that allows my After Effects use my RTX 3060 GPU. Been searching the whole Internet for a solution until I found this very helpful video. Thank you so much!
Oh my God! you are Amazing... I was working some project from last 1 month. and it was very heavy file. After this setting I am working on smoothly. Save my times. Thanks..
Your an angel bro I’m new to nvidia and have an 8gb 4060 ti an my renders key capping out at 3 gb and it was driving me crazy but I had no settings turned on
Cool stuff my friend :))) Massive improvement!!!!! The main was studio driver which I didnt even know it exists and of course secret option. But when I monitor the GPU utilisation, GPU is still somewhere beteween 0 - 25%, which I would expect to be fully used. Anyway, Saved me hours of rendering. Thanks for sharing your knowledge.
Tell me please. My video card started working in 3D scenes after your settings, this is cool, it didn’t work before. In 2d there is still 0% load on the video card(
@@FlixityOfficial Yes, there is Antiallising mood - that I can change (is it nessesary change?), and there is Antiallising setting, there is (Use global settings - Application controlled) - it' not active. My GPU is RTX 3060
I did follow all the steps exsactly i did not really get faster preview for me that is the problem rendering its ok but preview i get like all green then when i playback it gets holes like it was not cashed and and just gets stuck like this this hapends when i have more than 3-4 clips , before this was not hapening but all of the suden started, i am runing it on lenovo legion rtx 4060 8gb , 32 gmram i5 this should be ok config , and my other laptop is dell forgot exsact confing but its half od this and it renders very slow but no lags at least do you maybe know some posibile solution note i clean cash and purge all the time
My PC is i5-12600, 96G ram, RTX4060 w/8G vram, AE 2023, after applied these settings, render speed slowed down significantly from say 5'51" to well over 10 mins, very strange
Bro idk why, but render and preview slowed down more after applying this settings. My specs are i7 14700k, 32 gb Ram, Rtx 4070 ti. Could it be because of particle effects?
I have tried these settings but, it slowed my render time instead, plz see my other comment and tell me about my particular case, that would be really helpful, thanks bro your videos are helpful for many.
@@FlixityOfficial Intel Xeon w3680, 16 GB RAM, 128 GB SSD, 500 GB Hard, 2 GB Quadro K620. Gaming is working smoothly but after effects is not using GPU for rendering and that's why rendering is so slow. I waiting for your reply
@@FlixityOfficialI'm sorry it's not for this video, but the one you made on Pr. Before my Pr entered I'm sorry it's not for this video, but the one you made on Pr. Before my Pr, the software reports a driver problem with my NVIDIA M1000M. The link under your video does not send me to the NVIDIA page to download the driver. Thank you
@@FlixityOfficial hi. anything after 'Use:' under 'project settings>video rendering and effects'. also in GPU information. it only detected the video card of my processor. i got AE 2023 and RTX 4070 laptop.
@@FlixityOfficial it surely is detected coz it says here in the 'NVIDIA GPU Activity', After Effects (and other media software active) is using the GPU.
@@FlixityOfficial can this be about the latest driver? when i checked the games and apps it supports, after effects is not on the list. on the list was adobe illustrator, which i have, and it is detecting the GPU. but nvidia has a recommendation where after effects is mentioned in the driver's description. it was the October 2023 driver. does this happen?
I have a problem. I have a GeForce RTX 4080 card and I've installed the updated NVIDIA drivers. How is it possible that in the "GPU Information" section of the 3D Draft, it's telling me that the RAM or drivers are inadequate? It's not detecting my graphics card. What do I do?
Finally found a tutorial that allows my After Effects use my RTX 3060 GPU. Been searching the whole Internet for a solution until I found this very helpful video. Thank you so much!
You're welcome 🧡🧡. Glad it helped
my rendering time went from over 30 mins to only 8 mins using these settings. Brilliant! thankyou so much!!! :)
Great. You're welcome 🧡
Oh my God! you are Amazing... I was working some project from last 1 month. and it was very heavy file. After this setting I am working on smoothly. Save my times. Thanks..
Glad it helped. You're welcome 🧡
You deserve a medal! Thank you so much! 👍🙌🥇
You're welcome. Glad it helped 🧡
Applied all settings and my rendering speed is increased by 40%. Thanks!
Glad to hear that. You're welcome 🙂
It worked
Great
Your an angel bro I’m new to nvidia and have an 8gb 4060 ti an my renders key capping out at 3 gb and it was driving me crazy but I had no settings turned on
Glad it helped. Enjoy 🧡
Thank you so much brother ❤ my rendering speed is increased by 70% ❤
Great. Glad it helped 🧡
Thank you!
AE was using 90% of my CPU but only 8% of GPU. Have a good one!
Glad it helped. You're welcome 🧡
Cool stuff my friend :))) Massive improvement!!!!! The main was studio driver which I didnt even know it exists and of course secret option. But when I monitor the GPU utilisation, GPU is still somewhere beteween 0 - 25%, which I would expect to be fully used. Anyway, Saved me hours of rendering. Thanks for sharing your knowledge.
You're welcome. Glad it helped 🧡
very easy and quick tutorial! render is now 5x faster! i subscribed and liked! thanks!
Great. You're welcome 🧡
THANK U SO MUCH I LOVE INDIA
You're welcome 🧡🧡
Thanks !
You're welcome 🧡
Wowww Amazing, It Works
Glad to hear that 🧡
I need this for Topaz too. This was a great video.
Sure. Working on it
Thanks man ur tutorial really helped a lot ❤ keep it up
Glad it helped. You're welcome 🙂
Great video. Thanks.
You're welcome 🧡
Amazing brother....
thanak you🙌❤
You're welcome 🧡
One shouldn't have to jump through so many hoops to get AE to read an installed graphics card. Thank god for this vid. Thanks!
You're welcome. Glad it helped 🧡
Thank You so much💯💯💯💯✅
You're welcome 🧡
amazing, thanks a lot !
You're welcome. Glad it helped 🧡
thank you boss
Should I do these settings for Premiere Pro too? or not needed
You're welcome 🧡. For premiere pro settings are different.
thank you bro you make the grate tutorial video for me ，really solve my problem
Glad it helped. You're welcome 🙂
Thanks a lot for this, it is really helpful
Glad it helped. You're welcome 🧡
thank you so much now i've got so much issues. My screen is tinted in blue, im on 60fps with rtx3060 and when i watch any video it flicks
Apply gpu acceleration settings only then
Thanks bro for making this tutorial 😀
You're welcome
if i both play games and use softwares like after effects, which driver should i choose? or maybe i should change it everytime i use one or the other?
I do the same most of the time, I am using Studio Driver, that works best for both games and editing!
Nice bro
Thanks bro 🙂
Tell me please. My video card started working in 3D scenes after your settings, this is cool, it didn’t work before. In 2d there is still 0% load on the video card(
Load depends upon the effects and system specifications.
many many thanks
broh
Glad it helped. You're welcome 🧡
Thank you very much!And what about Antialising setting (it's not active) ? How can I fix it ? )
You're welcome 🧡. Your anti alising option is disabled?
@@FlixityOfficial Yes, there is Antiallising mood - that I can change (is it nessesary change?), and there is Antiallising setting, there is (Use global settings - Application controlled) - it' not active. My GPU is RTX 3060
Keep it application controlled
Ok, thank you)@@FlixityOfficial
really youu saved my time
My pleasure ❤️
many many many thanks................
You're welcome 🙂
Thanks bro, so good.. :
You're welcome ♥️
Really Helpful
Glad to hear that 🧡
nice thanks
You're welcome. Glad it helped 🧡
great tutorial! Thank you!
You're welcome 🧡
thanks so much
You're welcome 🧡
Thank you very much for this amazing tutorial sir, but after doing this all configuration my After effects load's decrease.😶
That's good but tell me was the rendering speed increased?
If I apply this setting , other applications rendering time will be the same or will decrease??
It's recommended to apply program settings individually.
Could I ask which is better for graphics work:
GTX 1660ti or Quadro M5000 8gb?
It depends bro. The more the better!
Are these settings work for GTX 1080ti graphics card?
Yes, for sure
hi dear, there is one more option that is CUDA sysmem Fallback policy..... what i select in this option????
What options do you see?
Thanks and next for topaz 😍
You're welcome. Sure, working on it
tkd bro
You're welcome 🧡🧡
tsss thank you so much
You're welcome 🧡
It can work on nvidia gt 710 and ram 8 gb... And processor is i3 7100 gen ??
Might be. Your specs are low
If i put one more 8GB for difficult work, will After Effects work fast?
Might be
100 percent worked bro
Glad it helped 😀
life saver
Glad it helped 🧡
Great
Thanks!
I already set these settings for Blender. There is any need to set it for after effects?
Individual settings are best for applying separately if not apply global settings
does it improve blender?
Broo my pc just apply on nvidia panel after you said the settings but unfortunately my pc go to 3040 4k screen then screen just full black 🥲 10:16
Pls
Pls
What effects you are using?
finally found a video thats just on point and saved a lot of time..
this worked ..
thank you so much bro
Glad it helped. You're welcome 🧡
I did follow all the steps exsactly i did not really get faster preview for me that is the problem rendering its ok but preview i get like all green then when i playback it gets holes like it was not cashed and and just gets stuck like this this hapends when i have more than 3-4 clips , before this was not hapening but all of the suden started, i am runing it on lenovo legion rtx 4060 8gb , 32 gmram i5 this should be ok config , and my other laptop is dell forgot exsact confing but its half od this and it renders very slow but no lags at least do you maybe know some posibile solution note i clean cash and purge all the time
What's your system specifications and your gpu?
@@FlixityOfficial lenovo legion rtx4060 8gm 32 gb ram i 5
And also when i did this my media encoder is not working 😭 wont load render idk how to reset way it was lol
thx
You're welcome 🧡
I am using adobe AE 2024 & GeForce RTX 2060, but rendering is still using CPU not the GPU. It shows 0% on GPU when rendering :(
Watch my latest videos on its optimization. New videos are coming soon to optimize aftereffects
Can I apply this setting on after effects 2021 as well?
Yes, for sure
are these settings for all gpus
Yes mostly
can i do the same for AFTER EFFECTS 2020??
Yes, for sure
Gpu information is not showing in the preview section. Now what to do?
I see. Ignore this setting then
My PC is i5-12600, 96G ram, RTX4060 w/8G vram,
AE 2023, after applied these settings, render speed slowed down significantly from say 5'51" to well over 10 mins, very strange
Apply secret settings in aftereffects to increase the rendering speed!
is this for laptop or pc
Both, that has nvidia gpu installed
I have no nvidia control pannel what should i do
What's your gpu?
please tell me your system specification?
Intel i5 9400f, 16 GB Ram, 1660 Ti, NVME M.2 SSD
How I get the free plugins like sapphire twistor and more?
Not recommended to use crack. Purchase official products from official website
Thank you very much. Why is video card memory usage always minimal in Manager? I have 12 GB. RTX 3060
It depends upon the algorithm you are using.
This works with all programs. Even Unreal Engine. How to fix it? The algorithm? @@FlixityOfficial
I did all this and still my after effects is slow as usual. I have an RTX 3060 12GB and 32gb of ram. What am I doing wrong?!
Apply secret settings and enable gpu acceleration in aftereffects by following my new videos
@@FlixityOfficial İ will check it tomorrow again. Şükran, dost
Şükriya*
Great. I am impressed you know my native language 😁
Bro idk why, but render and preview slowed down more after applying this settings. My specs are i7 14700k, 32 gb Ram, Rtx 4070 ti. Could it be because of particle effects?
Partials effect is cpu and ram dependent. It will definitely slow down your aftereffects
@@FlixityOfficial Ohk Thanks, but any solution to optimize Preview ?
Apply secret settings and gpu acceleration settings and allocate max ram to aftereffects
@@jontysb in particular effect go to render settings and change it from cpu to gpu
I have tried these settings but, it slowed my render time instead, plz see my other comment and tell me about my particular case, that would be really helpful, thanks bro your videos are helpful for many.
Let me know your aftereffects version and pc specifications.
@@FlixityOfficial Intel Xeon w3680, 16 GB RAM, 128 GB SSD, 500 GB Hard, 2 GB Quadro K620. Gaming is working smoothly but after effects is not using GPU for rendering and that's why rendering is so slow. I waiting for your reply
Aftereffects version?
@@FlixityOfficial after effects 2022
Did you apply secret settings and nvidia settings?
does this setting will fix preview lag ?
Yes, sure. Also watch my other videos too!
Thank you ♥️
You're welcome 🙂
Good evening I use your link but I can't find the file to reload please help me
Please elaborate your question. Thank you
@@FlixityOfficialI'm sorry it's not for this video, but the one you made on Pr. Before my Pr entered I'm sorry it's not for this video, but the one you made on Pr. Before my Pr, the software reports a driver problem with my NVIDIA M1000M. The link under your video does not send me to the NVIDIA page to download the driver. Thank you
The link is of my website where all links are shared. Let me know which video you are referring to
works for after effects 2024?
New video coming up soon
On Edit/Preferences/Preview My GPU Information not Detected? any solutions?
Watch my video on it, recently uploaded
@@FlixityOfficial okiee thanks a lot!
This one: ruclips.net/video/ABlH9CFuLeo/видео.html
why my invidia gpu not used for render when i render on quick time with appe prores?
Which effects you are using?
@@FlixityOfficial simple timeline when i export to quick time and prores 422 hq,
Right. What's your gpu?
His whay after effect don't use 100% of my gpu whene i go to task manger it show me just 5% and whene i play back video it use only cpu whay
It's because Aftereffects mostly use cpu and ram to render the effects being used!
I have done all of the above , but after effects is still not detecting my graphic card ?
Gpu is not used while rendering?
yes@@FlixityOfficial
in preferences-I have only the option of - Mercury software only. Mercury gpu accerlation is not available
What's your gpu? And aftereffects version?
I reinstalled after effects and it somehow worked. Anyways like your work keep it up@@FlixityOfficial
hi bro have 16 ram memory and the after effect telling me that the total memory is 3.89 gb how come? 7:05
and here 8:02 telling me that the installed ram is 14 gb how?
Bro make sure ram reserved for other application is lowest. Aftereffects should have maximum ram available
@@FlixityOfficial yeah it's lowest
i have zotac 4090 oc white edition not working properly ? why that's i dont know please help me out bro
What's the issue?
Same lol I have colorful legend version which is best
This tutorials ain't working
These are very minor
@@FlixityOfficial when i render any composition it show not showing realtime fps in red color how can i fix
Apply secret settings and aftereffects gpu acceleration settings
@@FlixityOfficial doesn't work
GPU 0-5% (4050 Rtx laptop) 😭
Have you applied secret settings?
@@FlixityOfficial yes I applied everything from this video
Apply these settings: ruclips.net/video/5O0p74txJko/видео.html
still man please help me fixing this gtx 1660 s it runs only with 6%-15%
10% usage is absolute. You are lucky
@@FlixityOfficial bro knows how to skip
Lol. No bro. You can apply secret settings and see the difference in rendering speed!
@FlixityOfficial i have 💀
Right. What's your aftereffects version?
реально ЛУЧШИЕ настройки панели управления NVIDIA для AFTER EFFECTS !!!
Glad it helped. Enjoy 🧡
Thanks now my shit wont render at all xD
You're welcome 😀
...а ещё афтеэффект сам видюхи не цепляет.
Yeah. It's a great software!
gtx 1050?
That's good gpu, would definitely recommend to apply settings
One question, to return to the game controller, do I simply click game ready driver?
No need. You can play games with nvidia studio driver too
background app 200fps?? jajajajajajajja xD ridiculous
Not related to aftereffects. It's for games if you play on your pc. You can ignore it
for me it made my rendering time longer...
It should not. What's your aftereffects version and gpu?
Yeah same here. RTX 4090 GPU Laptop. After Effects V 24.0.3
it's still grayed :(
What's greyed? Is yor gpu acceleration setting disabled?
@@FlixityOfficial hi. anything after 'Use:' under 'project settings>video rendering and effects'. also in GPU information. it only detected the video card of my processor. i got AE 2023 and RTX 4070 laptop.
You need to configure your gpu, your dedicated gpu is not being detected. Aftereffects is detecting only integrated gpu
@@FlixityOfficial it surely is detected coz it says here in the 'NVIDIA GPU Activity', After Effects (and other media software active) is using the GPU.
@@FlixityOfficial can this be about the latest driver? when i checked the games and apps it supports, after effects is not on the list. on the list was adobe illustrator, which i have, and it is detecting the GPU. but nvidia has a recommendation where after effects is mentioned in the driver's description. it was the October 2023 driver. does this happen?
I have a problem. I have a GeForce RTX 4080 card and I've installed the updated NVIDIA drivers. How is it possible that in the "GPU Information" section of the 3D Draft, it's telling me that the RAM or drivers are inadequate? It's not detecting my graphics card. What do I do?
What's your premiere adobe after effects version? Is it cracked or paid?
*Thanks Bro*
You're welcome 🙂