Chris flashed the ecu for my 2011 gsxr and I am extremely pleased. He is a really down to earth guy and everyone at the shop was very welcoming. I will continue to do business with Moore mafia and recommend them 100%
@@2wheelsnoproblems646 yep! I live in north GA, so instead of mailing it in and waiting, me and my wife drove up to the shop and he did it super quick. I went ahead and got a filter and some merch from him too.
Just got my ECU back from Chris for my 2020 Suzuki katana.huge improvement.way more power and ridability. Glad I went with Moore mafia. Highly recommend them.
2021 zx6r krt. Just got my ECU back yesterday. Super fast return and I have no codes thrown and instructions were clear and fool proof. Amazing service! And with the decel cut off disabled this thing is popping good flames on deceleration! Awsome! Thank you Chris and a big shout out to the rest of the family..💚 💯 percent recommend.
What mods do you have? I just sent my ecu out on my 11’ zx6r which is just a straight pipe and the nerves are building cause I want it back so the bike can run flawlessly haha
@@evoxjordan6330 Hey man. I removed the cats from the stock header and put a m4 gp19 slip on on it. Deleted 02 sensor but I left it in and just cut the wires so there wouldn't be a hole in the exhaust and removed the servo. That's it and she sounds like a beast and runs perfect. My rev limiter is now set to 15800rpm. I've had her to 158 and still had room to go so that's plenty for me bc I don't ride track.
So I have a 2022 zx6r and I want an m4 with an ecu flash. However I am worried about low end power loss? Did you notice any loss in low end power and if so did you get any back with the ecu flash
Lol you made this video the day you tuned my ecu. FYI you mailed it out 4pm yesterday and I'm receiving it today. Now that's fast, just like you made my bike.
Hey guys I just sent my ecu to moore mafia Wed and I got it back sat my 05 gsxr 600 is a lot smoother and has more acceleration. It also runs smother too and my bike previously had a tune on it. I would definitely recommend Chris moore for your tune
Hi Chris, love all your videos. They are very informative while at the same time, very entertaining! I sent my 12 Hayabusa ecu by UPS 3day on Thursday the 4th. I'm hoping for it to be in your shop when you open tomorrow. I'm really looking forward to the changes it makes along with all my other mods. As far as I'm concerned, sending it to Moore Mafia is the only choice. Chris might be all the way across the country from me but for this bike, there is no in between, nothing but the best!
Sup Chris! Thank you so much for this video giving Clarification on the ECU FLASH! HUGE HELP! I understand fully now! Lol! Gotta recheck my list! Thank you so much! Love the channel! Stay Up!!!!
I had several companies recommended to me for a flash on my 2012 zx6r. This shop was one of them. I did end up going with xplane r1 custom tuning just because it was more recommended. But id absolutely try moore next time around. Looks like both these companies are very similar how they flash. Someone like schnitz charges a good bit more for a fuel map based on mods where its included in the other guys price. But I gutted my cat, m4 gp19 slipon no baffle with prechamber delete, sprint air filter and smog block off plates so I definitely needed a flash. I had bought a pcv but was mislead about what it could do so I decided against using it and going with the flash. Should have it back by saturday im excited to feel the changes. This is a good video to explain in depth how the flash works. Remove restrictions and a map for mods is very important.
Thank you Chris! This answers a lot of the questions I had from the ZX10R video you posted yesterday. I’m definitely sending my ECU in for flash soon! 👊😎
Yeh 🤔 I'd say you've covered all of the essential questions that i see getting asked *every time* you post a video Chris. Maybe you should post this on your website as an official Q & A about ECU service, and head it WHAT i need to know . Just saying 😁
@@TeamMooreMafia good shout sir 👍 i see loads of comments from guys Wanting stuff done but *not* really having a clue of what they actually NEED done 😆
Great video.. I’m thinking about actually making a trip down to you guys this spring to have my bike flashed and dyno’d as well. This video definitely cleared up the few questions I had ‼️🤝
Just did this process with Chris for my 2021 ZX 14 r, worked just as he explained. Great service, fair price, very happy knowing my new bike is not running too lean as it does from the factory.
I know this is an old video but i hope i get a response, i live in south America and received a Z650 2017 a few weeks ago that came from Pennsylvania (almost a new bike with 2300 miles on it), when i was doing a complete maintenance i noted the ECU had a "Moore Mafia" sticker on it and thanks to that i could find you guys but now im wondering if there is a way to know what kind of modifications you did to the ECU of this bike?, you got any registration or something of every ECU you worked?
Can you re-flash my XL 750 Transalp 2024. I'll send the ECU from Thailand to you and have time to wait for it. How much will it cost. What do you recommend I change before I get it flashed. I'm not to worried about max performance just optimal
Chris the one thing I didn't hear in the video is about the Pop and Bang bring on the noise option.... what do you do in the ECU to make this happen and will this have my bike shooting flames and sh*t??? I'm gonna run a shorty M4 slip on prior to sending it to you as well as a high flow K&N filter.... I want the NOISSSSSSEEEEE!!!!!
I happen to have an 05 cbr1000rr and understand the ecu can’t be flashed. Is that correct and is there a way around The ecu to Compensate for the pipe and Filter upgrade??
Shipped mine to SuperbikeUnlimited in November. After countless calls and lies about shipping it’s still not here! The guy on the phone constantly lies to me about what they got going on over there. I wish I would thought about you guys
My Gsx-S1000 is already flashed by someone else but isn't very smooth at lower rpm. Full exhaust. Still too lean I bet. I think I'll send mine in before spring.
My friend you are unbelievable! I am in Greece ,l have a gsxr1000 k4. A programmer here,he told me that this engine only needs gasoline in the ECU. No advance. Can you help me? I wish we were close to make it for me💖
What if I don't live in the US but I have a feeling that your flashes are better than when I do it locally, what should I do? If I did something to the bodywork that affected the weight, should I mention that? I know there are 2 kinds of flashes. Normal and a more expensive race flash. What if I just want to go fast for an every day bike but still want make good turns. Do you recommend the more expensive one? If not, why?
This was all facts. They received my ECU last week Thursday and I got it back Tuesday (post office problem) it was set to deliver on Saturday then USPS said Friday then they... long story short not Mooremafia's fault. My check engine light stayed on after the cycle, called and got Chris and he explained what to do and everything works perfectly. 2017 GSXR1K OMG my shit is like a new bike. My brother rode it and now is selling his drag '07 1k and drag '12 busa to get a newer 1k.
Chris, I currently run a power commander on my '19 GSXR750 for a tune and quickshifter. Doing your ECU flash would you recommend selling the PC and getting a stand alone QS or zeroing out the PC and just keeping it on the bike for the QS?
I have a question about how does the clutch switch affect engine operation on a gen2 busa, 08 suzuki b king, gsx1300 to be exact, and how necessary is this for the engine management system and can that be changed in an engine flash? My fi light comes on sometimes when I let the clutch out and decelerating, and I've heard of some guys bypassing the swith somehow, but I don't know much about what they're doing yet.
I just sent my motorcycles ecu i did write the mods but it didn't write my info on that peace of paper i hope the can use the return address on the package it was shipped
I have an 06 ZX-10r with a slip on. ECU was flashed by previous owner. I have to go back to stock pipes for inspection purposes. if i keep the stock pipes on, will i have to flash again?
06 busa straight pipes stock 16/43 sprockets would flashing do much for this or should I invest in extra 1800 on a full "exhaust something I don't wanna do"
Nice video!! I wish I knew about the ECU flash before I got my bike tuned. I just have the power commander which is good but be nice to have that full ECU FLASH.
@@badgerman23 A ecu flash is more flexible a few examples making changes to timing, eliminating fi codes from deleting emission related things, and remove gear and speed limiter restrictions. Power commander just alters fuel and air trims. Power commander was more for older machines and imo they are kind of a waste of money on top of a ecu flash w a few hours of dyno time. Currently riding a 207rwhp flashed 2020 ZX10R and 128whp zx6r both flashed. No pc3 or pc5 you just can do alot more with a flash. A pc alters the signal between ecu and engine to make fuel air changes. A ecu flash is basically re writing the ecu map. Pc is making changes to base map
I had mine flashed by Brock..do you think you can improve on his flash? I have a 2017 GSXR 1000R..I also had it dyno tuned..he told me to after I got my ecu back because the fuel was so off..
@@TeamMooreMafia Thanks for the reply Chris, I have done all the mods people do the full exhaust and filter removed all the emissions junk and actually pulled the secondary throttle blades myself. I added a fuel controller and bike runs great but I need every hp I can get out of it. Not sure the a/f I put new plugs and fresh oil in also. It's a 2007 bandit 1250. Don't think there are any other restrictions may could adjust the timing some but that would have to be done on dyno I believe. If you were closer I would have been there to see you already I'm in Louisiana.
Here's possibly a stupid question. I heard that a power commander is needed for a tune, that true? Chances are, when I get a new bike, i'd flash and tune
@@TeamMooreMafia Another reason why I wont be going to the place I went to last year. They told me in order to tune a bike, a power commander is needed because that's what they hook up to? Dang I paid around $1000 for that PC, tune, and an ECU flash (they had to send it out)
Any update on the 2020 Z H2? The question i have, if there isn’t a flash yet and i add a PC 5, will it affect my different rider modes and power settings? Will they all be the same, with better performance? Or will they all just be the same?
Yo what up Chris this is Draco904 and 1st off I really love your channel dude and all the content of it. Of course I’m a subscriber lol and have a question: I have a 2002 Suzuki GSXR 750 it’s my very 1st bike ever and yes I’m very excited:) it has no power commander it has a slip on yoshimira RS3 exhaust so I’d like to knw if you’re able to flash my ECU to get me the best performance possible mailing it in to you and do I need a power commander? Im not doing no racing but would just love to have great performance and sound
Hi i have an 06 busa running sluggish at idle i have a fuil athermamarket exhaust I had my ecu flashed last yearb but its not running they way i think itshld be an poor starting will the flash help or do i need to have it tuned
@@TeamMooreMafia you really brought that ninja to life !!! your a wizard at tuning but i sold her and replaced her with an 02 r1 ...just need you to tune her after i get the exup delete pipe
Here's a question for you, do you have any experience with None US spec ECU's? I know there are huge differences in litre bikes as we see MUCH higher dyno readings on stock bikes because of your emissions regs especially the older 'california model' bikes. Iv seen a US ecu bought cheap drop 20% power on a UK spec bike. Do you have any manufacturers you CANNOT do? I know KTM and Triumph cables are ludicrously expensive. Thanks Chris.
@@TeamMooreMafia id live to learn to do this sort of stuff, where did you pick up your training for tuning bikes? If I could id love to just hang out, sweep the shop and learn. Iv not raced in years because of ending up in a wheelchair and I have this mad idea for a Drag spec triumph rocket 3 trike. I know there's an EASY 200hp setup just with pipes an airbox and throwing a supercharger on is a boom easy 450hp.
I’ve had parts for my bike shipped international I live in Florida and it wasn’t that bad at all I’ll vouch for Chris because he had the resources and he definitely knows his stuff u will not be disappointed . I just installed a brocks penta on my busa u can check it out on my ig # thegrapebusa
Chris is by far one of the coolest and best tuners I've met! Definitely Would Recommend 100%
Thank you sir!
He doesn't do the tuning, but he is a pretty solid dude and loves the bike community.
In my personal opinion, the content and service that More Mafia provide is the best out there !!! Keep up the good work Chris.
Thank you
Chris flashed the ecu for my 2011 gsxr and I am extremely pleased. He is a really down to earth guy and everyone at the shop was very welcoming. I will continue to do business with Moore mafia and recommend them 100%
Thank you sir. I'm glad you are enjoying it!
U went to the shop to get it flashed?
@@2wheelsnoproblems646 yep! I live in north GA, so instead of mailing it in and waiting, me and my wife drove up to the shop and he did it super quick. I went ahead and got a filter and some merch from him too.
@@Gus_1991 nice. Thanks for the quick response
chris is not kidding when he said they ship it out same day. got mine superr fast!!
💪
@@TeamMooreMafia thinking bout bringing my bike to you
Just got my ECU back from Chris for my 2020 Suzuki katana.huge improvement.way more power and ridability. Glad I went with Moore mafia. Highly recommend them.
2021 zx6r krt. Just got my ECU back yesterday. Super fast return and I have no codes thrown and instructions were clear and fool proof. Amazing service! And with the decel cut off disabled this thing is popping good flames on deceleration! Awsome! Thank you Chris and a big shout out to the rest of the family..💚 💯 percent recommend.
Have a Zx6r looking to get flashed. How do you like it so far compared to before?
@@YouKnowWendy it definitely woke the bike up and I feel like I have all the power that it should have. I'd say do it man. You can't lose only gain. 😊
What mods do you have? I just sent my ecu out on my 11’ zx6r which is just a straight pipe and the nerves are building cause I want it back so the bike can run flawlessly haha
@@evoxjordan6330 Hey man. I removed the cats from the stock header and put a m4 gp19 slip on on it. Deleted 02 sensor but I left it in and just cut the wires so there wouldn't be a hole in the exhaust and removed the servo. That's it and she sounds like a beast and runs perfect. My rev limiter is now set to 15800rpm. I've had her to 158 and still had room to go so that's plenty for me bc I don't ride track.
So I have a 2022 zx6r and I want an m4 with an ecu flash. However I am worried about low end power loss? Did you notice any loss in low end power and if so did you get any back with the ecu flash
Lol you made this video the day you tuned my ecu. FYI you mailed it out 4pm yesterday and I'm receiving it today. Now that's fast, just like you made my bike.
One happy customer here! 2017 ZX10R ECU flashed in November. Thanks!
💪💪
Hey guys I just sent my ecu to moore mafia Wed and I got it back sat my 05 gsxr 600 is a lot smoother and has more acceleration. It also runs smother too and my bike previously had a tune on it. I would definitely recommend Chris moore for your tune
Thank You!!!
Just purchased your ecu flash for my 06 GSX-R1000! Thanks for all the great videos! They keep me occupied at night when I am getting ready for bed lol
Do I ship it to them or they send a package to me to be shipped out
Hi Chris, love all your videos. They are very informative while at the same time, very entertaining! I sent my 12 Hayabusa ecu by UPS 3day on Thursday the 4th. I'm hoping for it to be in your shop when you open tomorrow. I'm really looking forward to the changes it makes along with all my other mods. As far as I'm concerned, sending it to Moore Mafia is the only choice. Chris might be all the way across the country from me but for this bike, there is no in between, nothing but the best!
Sup Chris! Thank you so much for this video giving Clarification on the ECU FLASH! HUGE HELP! I understand fully now! Lol! Gotta recheck my list! Thank you so much! Love the channel! Stay Up!!!!
Just sent mine out the other day can't wait to see how the tune is
How was it?
@@tvbui20 changed the bike worth every penny
My bike is definitely the bike it’s supposed to be now. Ty Chris and Moore mafia. Y’all have been awesome and easy to work with.
I'm about to hit up chris and send my ECU off. I'm excited! Heard chris was the man 💯
Hello I have a 2018 yamaha r1.im actually high maintenance. And moore mafia sent my ecu next day air.did a absolutely 💯 job..thank you
Definitely worth it if you want your bike running in top shape
My flash is done ;) and dyno tested.
But in Speedbike in Poland xD
When i send my ECU I would LOVE a Moore Mafia sticker
$5 bucks for 2. They are out of key chains. $5
I had several companies recommended to me for a flash on my 2012 zx6r. This shop was one of them. I did end up going with xplane r1 custom tuning just because it was more recommended. But id absolutely try moore next time around. Looks like both these companies are very similar how they flash. Someone like schnitz charges a good bit more for a fuel map based on mods where its included in the other guys price. But I gutted my cat, m4 gp19 slipon no baffle with prechamber delete, sprint air filter and smog block off plates so I definitely needed a flash. I had bought a pcv but was mislead about what it could do so I decided against using it and going with the flash. Should have it back by saturday im excited to feel the changes. This is a good video to explain in depth how the flash works. Remove restrictions and a map for mods is very important.
Moore mafia has the best flashes off rip!!!!!!
Trying to decide between a flash from Xplane R1 Custom tuning by Nick Marino or a flash from Moore Mafia. Decisions, decisions.
Literally have the website up on my browser now about to pull the trigger.
Welcome to the party!
@@TeamMooreMafia I'm gunna pull my ecu this weekend and send it out probably Monday.
Thanks for flash tunning my mt10! Night and day difference!!!!
Thank you Chris! This answers a lot of the questions I had from the ZX10R video you posted yesterday. I’m definitely sending my ECU in for flash soon! 👊😎
Cool thanks for this Vid , I’m shopping for a bike and was wondering what I needed to have you ECU tune my new bike.
Yeh 🤔 I'd say you've covered all of the essential questions that i see getting asked *every time* you post a video Chris. Maybe you should post this on your website as an official Q & A about ECU service, and head it WHAT i need to know . Just saying 😁
It has just been posted on the website!
@@TeamMooreMafia good shout sir 👍 i see loads of comments from guys Wanting stuff done but *not* really having a clue of what they actually NEED done 😆
USPS is backed up and is the worse in Philly. Took me 5-6 months to get other packages ordered in November/December
Patiently waiting for the 21 zx10r flash...... I need it...... lol
Just came across this video! Great info!,
Great video.. I’m thinking about actually making a trip down to you guys this spring to have my bike flashed and dyno’d as well. This video definitely cleared up the few questions I had ‼️🤝
Just did this process with Chris for my 2021 ZX 14 r, worked just as he explained. Great service, fair price, very happy knowing my new bike is not running too lean as it does from the factory.
💪💪 thanks for your business!
Can't wait to send you my ecu for my m109 2018
Great info because I always wondered if I'd have to remove my power commander
Glad I could help
I know this is an old video but i hope i get a response, i live in south America and received a Z650 2017 a few weeks ago that came from Pennsylvania (almost a new bike with 2300 miles on it), when i was doing a complete maintenance i noted the ECU had a "Moore Mafia" sticker on it and thanks to that i could find you guys but now im wondering if there is a way to know what kind of modifications you did to the ECU of this bike?, you got any registration or something of every ECU you worked?
Can you re-flash my XL 750 Transalp 2024. I'll send the ECU from Thailand to you and have time to wait for it. How much will it cost. What do you recommend I change before I get it flashed. I'm not to worried about max performance just optimal
Chris the one thing I didn't hear in the video is about the Pop and Bang bring on the noise option.... what do you do in the ECU to make this happen and will this have my bike shooting flames and sh*t??? I'm gonna run a shorty M4 slip on prior to sending it to you as well as a high flow K&N filter.... I want the NOISSSSSSEEEEE!!!!!
I just hate to go without my bike for anytime at all, is it possible to make an appointment and drive to you?
I can’t wait to do this!!
I happen to have an 05 cbr1000rr and understand the ecu can’t be flashed.
Is that correct and is there a way around
The ecu to Compensate for the pipe and
Filter upgrade??
Shipped mine to SuperbikeUnlimited in November. After countless calls and lies about shipping it’s still not here! The guy on the phone constantly lies to me about what they got going on over there. I wish I would thought about you guys
Bro frfr they are great. I just got mine done
@@ry8752 I hope the flash is good but they do be lying lol
@@imsleeping5947 my bad I meant I got my flash from Mooremafia
@@ry8752 oh for sure ! You can tell this man runs a stand up business
Wow.
My Gsx-S1000 is already flashed by someone else but isn't very smooth at lower rpm. Full exhaust. Still too lean I bet. I think I'll send mine in before spring.
Come out to Kansas for a drag school in 2021!??
Just out of curiosity could you flash an MV Agusta F4R. I know Italian bikes can be a different ball game.
Check out Woolwich Racing, but i think you already know the answer.......
My friend you are unbelievable! I am in Greece ,l have a gsxr1000 k4. A programmer here,he told me that this engine only needs gasoline in the ECU. No advance. Can you help me? I wish we were close to make it for me💖
Can I come to the shop and get my ecu flashed while I wait or do I have to make an appointment for that
I gave him a heads up that I was coming up there, and he did it while I waited. I would definitely do that if you live close enough.
As long as you let me know you are coming we can make it happen.
@@TeamMooreMafia thanks
Chris my name is chase almond I have a 22 stock Mto7 would my bike benefit from flash or dyno tune
I live in the UK. could I still send my ecu to you?
What if I don't live in the US but I have a feeling that your flashes are better than when I do it locally, what should I do?
If I did something to the bodywork that affected the weight, should I mention that?
I know there are 2 kinds of flashes. Normal and a more expensive race flash. What if I just want to go fast for an every day bike but still want make good turns. Do you recommend the more expensive one? If not, why?
Bro my GSX-R 1000R quick shifter feels so fast and smooth stock... You're saying you'd be able to make it even better?!
This was all facts. They received my ECU last week Thursday and I got it back Tuesday (post office problem) it was set to deliver on Saturday then USPS said Friday then they... long story short not Mooremafia's fault. My check engine light stayed on after the cycle, called and got Chris and he explained what to do and everything works perfectly.
2017 GSXR1K OMG my shit is like a new bike. My brother rode it and now is selling his drag '07 1k and drag '12 busa to get a newer 1k.
Chris, I currently run a power commander on my '19 GSXR750 for a tune and quickshifter. Doing your ECU flash would you recommend selling the PC and getting a stand alone QS or zeroing out the PC and just keeping it on the bike for the QS?
Z900 baby 😈😈
I have a question about how does the clutch switch affect engine operation on a gen2 busa, 08 suzuki b king, gsx1300 to be exact, and how necessary is this for the engine management system and can that be changed in an engine flash? My fi light comes on sometimes when I let the clutch out and decelerating, and I've heard of some guys bypassing the swith somehow, but I don't know much about what they're doing yet.
Why can't you flash the ecu of a 2007 r1?
I just sent my motorcycles ecu i did write the mods but it didn't write my info on that peace of paper i hope the can use the return address on the package it was shipped
Might be technologically challenged but not seeing the list of programs/bikes mentioned in the early part of this vid.
If you go to his website and click on your brand it’ll list every bike for that brand that they can do.
I looked. Click on the brand names.
Do you do Cruisers or just sport bikes?
I have an 06 ZX-10r with a slip on. ECU was flashed by previous owner. I have to go back to stock pipes for inspection purposes. if i keep the stock pipes on, will i have to flash again?
What about flashing over seas?
7:04
Hey Chris, when you flash, do you guys adjust for air ram up to 190mph?
How can you tell if the previous owner flashed the ecu of the bike you are owning?
Please Sir, once I proceed to checkout & mail it. how will you know that my ECU correspond to my payment ? If that makes sense.
06 busa straight pipes stock 16/43 sprockets would flashing do much for this or should I invest in extra 1800 on a full "exhaust something I don't wanna do"
Nice video!! I wish I knew about the ECU flash before I got my bike tuned. I just have the power commander which is good but be nice to have that full ECU FLASH.
@@badgerman23 absolutely not true at all. Not a internet warrior and mean no disrespect but major differences between the two
@@badgerman23 A ecu flash is more flexible a few examples making changes to timing, eliminating fi codes from deleting emission related things, and remove gear and speed limiter restrictions. Power commander just alters fuel and air trims. Power commander was more for older machines and imo they are kind of a waste of money on top of a ecu flash w a few hours of dyno time. Currently riding a 207rwhp flashed 2020 ZX10R and 128whp zx6r both flashed. No pc3 or pc5 you just can do alot more with a flash. A pc alters the signal between ecu and engine to make fuel air changes. A ecu flash is basically re writing the ecu map. Pc is making changes to base map
Get your ecu flashed still, you're leaving alot on the table
I had mine flashed by Brock..do you think you can improve on his flash? I have a 2017 GSXR 1000R..I also had it dyno tuned..he told me to after I got my ecu back because the fuel was so off..
I dont want close i want the Ultimate power the bike is suppose to have Can u do 2000models Gsxr600 Y
Hi Chris, can one get a little bit more toque down low with a bike that's bone stock? My bike's cbr650r 2019 model.
If the ecu been reflashed, is it possible to bring back the ecu to stock again?
Whats the cost for the autoblipper to be enabled
Wish they would get the 2020 R1 unlocked.
Hopefully soon
Can my 2002 hyabusa be flashed or is it to old
can I get my ecu flashed if I don't have any performance mods yet?
Can I add the exhaust and filter later?
I have an stock ECU from a 2018 gsxr1000r had 3000miles on it... Before I swapped to Yoshi EM-PRO, how much is the stock ECU worth?
Does this void the warranty?
How we looking on the 2020 r1? Any idea when its getting cracked?
No clue on that one.
I know they aren't popular but wish you had tuned a suzuki bandit 1250.
I can flash that one! I've done a couple. Just not on video.
@@TeamMooreMafia Thanks for the reply Chris, I have done all the mods people do the full exhaust and filter removed all the emissions junk and actually pulled the secondary throttle blades myself. I added a fuel controller and bike runs great but I need every hp I can get out of it. Not sure the a/f I put new plugs and fresh oil in also. It's a 2007 bandit 1250. Don't think there are any other restrictions may could adjust the timing some but that would have to be done on dyno I believe. If you were closer I would have been there to see you already I'm in Louisiana.
Not sure if possible, but if you can flash a 98 750 gsxr fi I'm definitely interested.
04 and up on the 750
Should or can I get my ecu flash ,without any mods yet? Would it help my bike at all?( 06 r6)
Going to contact you to flash my 2020 750 in the near future after i purchase my second one 💪🏼
Here's possibly a stupid question. I heard that a power commander is needed for a tune, that true? Chances are, when I get a new bike, i'd flash and tune
On all the new bikes a Power Commander is not needed.
@@TeamMooreMafia Another reason why I wont be going to the place I went to last year. They told me in order to tune a bike, a power commander is needed because that's what they hook up to? Dang I paid around $1000 for that PC, tune, and an ECU flash (they had to send it out)
What does it mean I got my R1 dino and the check engine light is on
Any update on the 2020 Z H2? The question i have, if there isn’t a flash yet and i add a PC 5, will it affect my different rider modes and power settings? Will they all be the same, with better performance? Or will they all just be the same?
What yr do you stop flashing ecu. Have a08zx10. Is it worth flashing.
What if we provide a return label for say fedex or ups
Yo what up Chris this is Draco904 and 1st off I really love your channel dude and all the content of it. Of course I’m a subscriber lol and have a question: I have a 2002 Suzuki GSXR 750 it’s my very 1st bike ever and yes I’m very excited:) it has no power commander it has a slip on yoshimira RS3 exhaust so I’d like to knw if you’re able to flash my ECU to get me the best performance possible mailing it in to you and do I need a power commander? Im not doing no racing but would just love to have great performance and sound
I can only do Flash on 04 and up 750. It could be Dyno tuned through if you got a power commander.
cool I’ll get one...thanks a lot bro for replying and good luck with the race:)
Hi i have an 06 busa running sluggish at idle i have a fuil athermamarket exhaust
I had my ecu flashed last yearb but its not running they way i think itshld be an poor starting will the flash help or do i need to have it tuned
i wanna decat my gsxr600 would this tune bypass the sensor ?
Whyd u change it from 240 to 270
Do you flash dirt bikes, too? I have a 2008 WR250r I want flashed.
I can not do them.
Can you flash a 2010 Honda vfr 1200f ecu? IF so I'm sending it to you asap
Present sir!!!!!!
He's great
Would flashing a stock bike be worth it? I have a k7 gsxr600 that I like the stock exhaust, gearing, air filter etc
YES 100% watch his new vid he just posted of a STOCK gsxr 600 on the dyno
was super happy with how my 650r came out you did a video on ..i will be bringing in my r1 soon
Glad you are enjoying it!
@@TeamMooreMafia you really brought that ninja to life !!! your a wizard at tuning but i sold her and replaced her with an 02 r1 ...just need you to tune her after i get the exup delete pipe
So does this mean my bike will be unrestricted?
Do I have to do an 02 delete with ecu flash? 17 cbr1000rrA
anyone know how this reflash would work on a bike in southern hemisphere ?
Here's a question for you, do you have any experience with None US spec ECU's? I know there are huge differences in litre bikes as we see MUCH higher dyno readings on stock bikes because of your emissions regs especially the older 'california model' bikes. Iv seen a US ecu bought cheap drop 20% power on a UK spec bike.
Do you have any manufacturers you CANNOT do? I know KTM and Triumph cables are ludicrously expensive.
Thanks Chris.
I can only do Japanese brands.
EU spec bikes are definitely different that the stuff we have here in the 🇺🇸
@@TeamMooreMafia id live to learn to do this sort of stuff, where did you pick up your training for tuning bikes?
If I could id love to just hang out, sweep the shop and learn. Iv not raced in years because of ending up in a wheelchair and I have this mad idea for a Drag spec triumph rocket 3 trike. I know there's an EASY 200hp setup just with pipes an airbox and throwing a supercharger on is a boom easy 450hp.
I live in Canada. A little hesitant to ship that far. Still can't decide what exhaust I want on my 2019 zx14r.
We send a lot of them to Canada. As long as customs doesn't hold it up, shipping isn't to bad.
I’ve had parts for my bike shipped international I live in Florida and it wasn’t that bad at all I’ll vouch for Chris because he had the resources and he definitely knows his stuff u will not be disappointed . I just installed a brocks penta on my busa u can check it out on my ig # thegrapebusa