Unfortunately, the unit is sold as a loaded enclosure only. The enclosure volume is matched to the requirements of the included Phoenix Gold subwoofer.
i added this box to my bronco. where do the speaker wires go. this is not a complete install video. i currently have a tailgate weight. lol... is there a wiring video on this
The wire that runs from the newly mounted enclosure would have to be routed to an aftermarket amplifier (sold separately) that is needed to power it. Where it gets routed would be dependent on where that aftermarket amplifier was installed.
The 12" Subwoofer definitely needs an amplifier to drive it. We offer several amplifiers that will power it, depending on what other amplification you are looking for. stingeroffroad.com/collections/amplifiers
The Bronco I have has had the table already installed on the back tailgate and the plastic piece is removed and did not come with it. Is there a way to ensure a good mount with out it
While the factory swing gate trim panel is not required, and is covered by the newly mounted enclosure, you may want to visit your local Ford dealer and have them order you a replacement one, just incase.
Yes, this can be added to both the standard and amplified factory audio systems in the Bronco. Both would require a separate amplifier to power the loaded enclosure.
This enclosure requires an aftermarket amplifier (sold separately). It is not able to be powered directly from the factory radio or amplifier. We do have bundles available online, if you're interested. bit.ly/43Pfj2g
As long as no wiring or other factory components are damaged while you are installing the enclosure, nothing about putting this in a Bronco would void any warranty. If you are unsure, we advise having it professionally installed by an authorized Stinger dealer. stingerelectronics.com/pages/store-locator
This loaded enclosure needs to be powered with an external amplifier (sold separately), and can be used with or without the factory subwoofer still running, in both amplified and non amplified factory radio trims.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Bronco owners will love this upgrade! It’s awesome in a Jeep!
Thanks for the video! Please do wiring and Amp install now!
Best Video ever😅..!! Finally taken my sub enclosure out...more room..Thank you!!
Eric is the man. Crashed a wedding at a SFD hotel gathering many years ago. Good times 😂
Believe me you create best installation videos
Such a clean install and good looking product! I bet it is great for tailgating or camping!
Looks good! Love how in-depth the installation videos are.
Does this sub and enclosure leave enough room for the Ford slideout tailgate? Thank you.
Great install video. Looking at getting a bronco
Thinking of upgrading to a Raptor. Does this speaker fit the Raptor tailgate?
where does the amplifier for this subwoofer go?
I do not own a bronco but have this enclosure in my jeep wrangler and I absolutely love it definitely recommend checking it out!!
how does it sound?
Great design definitely saves space and look awesome! I would definitely recommend.
Very well thought-out kit and easy to follow instructions!
I love how simplistic and genius this is. Enjoy the thump , ford owners! Stinger to the rescue!
Easy to follow video, clear instructions!
Nice upgrade! Looks so clean!
I bet that sounds amazing! Awesome install video.
Where is the amplifier located
Can I buy one of these kits without a sub, just the box and installation hardware?
Unfortunately, the unit is sold as a loaded enclosure only. The enclosure volume is matched to the requirements of the included Phoenix Gold subwoofer.
Nice sub, I like this vehicle specific rather than the universal
Can’t wait to get this!!
Speaker wire didn't come with the product 😢
Love the install videos, so helpful. Thanks!
Great install video!!
i added this box to my bronco. where do the speaker wires go. this is not a complete install video. i currently have a tailgate weight. lol... is there a wiring video on this
The wire that runs from the newly mounted enclosure would have to be routed to an aftermarket amplifier (sold separately) that is needed to power it. Where it gets routed would be dependent on where that aftermarket amplifier was installed.
So does it get all the power it needs from the truck or does it need an amp?
The 12" Subwoofer definitely needs an amplifier to drive it. We offer several amplifiers that will power it, depending on what other amplification you are looking for. stingeroffroad.com/collections/amplifiers
The Bronco I have has had the table already installed on the back tailgate and the plastic piece is removed and did not come with it. Is there a way to ensure a good mount with out it
While the factory swing gate trim panel is not required, and is covered by the newly mounted enclosure, you may want to visit your local Ford dealer and have them order you a replacement one, just incase.
Can this be added to the B&O system to add sub base?
Yes, this can be added to both the standard and amplified factory audio systems in the Bronco. Both would require a separate amplifier to power the loaded enclosure.
The instructions don’t say to put the plastic piece back on under the box. Is it supposed to?
Yes, the factory trim piece that is removed for routing the wire thru the factory wire loom is snapped back into place after the wire is routed.
@@Stinger.Solutions Gotcha, thanks
do you need to buy an amp for this subwoofer or is the stock amp fine?
This enclosure requires an aftermarket amplifier (sold separately). It is not able to be powered directly from the factory radio or amplifier. We do have bundles available online, if you're interested. bit.ly/43Pfj2g
Where do we connect to new amplifier too
Super awesome! I want one in my jeep!
Great fit and finish!!
What about factory warranty? Dose this screw your bronco’s and warranty?
As long as no wiring or other factory components are damaged while you are installing the enclosure, nothing about putting this in a Bronco would void any warranty. If you are unsure, we advise having it professionally installed by an authorized Stinger dealer.
stingerelectronics.com/pages/store-locator
does this over ride the main sub? so it's not going too.
This loaded enclosure needs to be powered with an external amplifier (sold separately), and can be used with or without the factory subwoofer still running, in both amplified and non amplified factory radio trims.
Looks amazing!
Nice upgrade
Nice!!
I’m not sure where my Amplifire mounting location is in my base bronco. Is it behind the head unit?
In the Broncos without the B&O audio system, the factory audio control module is in the dash, under the screen.