3D Printed Deathstroke Mask | Replica Prop Cosplay | Part 1 How to Make
HTML-код
- Опубликовано: 9 сен 2024
- It's time to finally make a Deathstroke mask. This is Part 1 covering the printing of the mask. I will be covering how to finish off the mask in another video
Deathstroke 3D files ➜ www.thingivers...
Checkout Peter Snyder aka Killonious profile ➜
www.thingivers...
________________________________________________
CR-10 3D PRINTERS USA ➜ TINYMACHINES www.tinymachin...
CR-10 3D PRINTER ➜ US PLUG GEARBEST
www.gearbest.co...
CR-10 3D PRINTER ➜ EU PLUG GEARBEST
www.gearbest.co...
________________________________________________
MY PATREON ➜ / unclejessy
_______________________________________________
CR-10 ➜ amzn.to/2sciW1Z
HATCHBOX PLA ➜ amzn.to/2l07GT8
MICROSD EXTENSION ➜ amzn.to/2qkc9nN
XTC-3D ➜ amzn.to/2kiMSEc
PROBOND WOOD FILLER ➜ amzn.to/2oSXC1J
BONDO SPOT PUTTY ➜ amzn.to/2pYvGfc
MAGNETS ➜ amzn.to/2qHMDJY
DREMEL ➜ amzn.to/2rqEJVV
BUILDTAK SPATULA ➜ amzn.to/2l6n5n5
CANON T6i ➜ amzn.to/1SFIav9
LIGHTS ➜ amzn.to/2lGRHZ8
________________________________________________
MIXER.com to see me Live Stream ➜ mixer.com/uncl...
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
RUclips ➜ / unclejessy
________________________________________________
MUSIC - Argofox | Royalty Free Music
Wontolla - Lighter Than Air
• Wontolla - Lighter Tha...
Thanks for watching!
CR-10 3D PRINTER ➜ US PLUG GEARBEST
www.gearbest.com/3d-printers-3d-printer-kits/pp_441281.html?wid=21&lkid=10629579
CR-10 3D PRINTER ➜ EU PLUG GEARBEST
www.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?lkid=10960055
CR-10 is getting more and more expensive every time I check it....I won't be able to afford it soon!
Uncle Jessy hi
Does this work for CR-10 Smart Pro?
OMG! Dude! Thank you so much! I need every bit of this in my life
Great to see Pete's stuff featured again!
Jim Esposito he seriously has some amazing files he's designed.
Hey! My print of this was on the right at 1:09
Woot woot!
Yours came out great!
Infinitely better than Deadpool!
That CR-10 is a BEAST for large and small quality prints. Great Video Jessy!
You always do a great job on cosplay items
Yeey its completed
Getting there
So COOL
I'm a beginner printer and I'll always support you buddy
Great video as always. You should make a Deathstroke Mask for your Pickle Rick you made.
Bwahahaha now thats an idea
U kind of looks like deathstroke as well, nice build
I can't wait for you to paint that.
Same here... fingers crossed will have that up in a few days
damn good job the mask looks awesome
Thanks brotha
Uncle Jessy np man
yes look amazing good job
thanks!
Uncle Jessy question what you use to slice your projects
looks sweet!
thanks man
That's so awesome
thanks man
Man i need one of these aha Wish could afford 3D printing machine ha would make loads of masks to wear Awesome video btw keep up amazing work you are doing
Great Vid. He has the best models for sure. Just curious, how much did you scale it? Cheers.
Lol saw your video when you got your cr10 bought one that night after being convinced it was that good literally first print I did was this mask that's awesome
Try to put some silicone and plaster and ulra-30 to make the color pop.
Please tell or show how you generated supports around the eye area. I have tried custom supports supports blockers etc. I am now attempting to just print it with the chin down with supports going from eyes to build plate. I am printing the two eyed version.
how long did it take you to print the mask? and what settings did you use?
I printed it and it was between 65 and 80 hours
Hey! I have the same printer as you, and I use cura, but I can't figure out how you were able to print this with so little support. Any tips? :D
just subbed! great print!
Vanaris thanks for checking out the video and channel!
wish you would go into more detail about your print settings. looking to print masks like this and the batman cowl on my ultimaker original
Looks great I bought xcoser mask looks same as yours I spent 60 dollars for mine that have one eye hole
I have to get that mask it is sooooo cool dude
How much plastic do you need?
I am setting up my CR-10 to do this print, can't wait! This will be the biggest thing I've printed on any 3d printer. By the way, any advice for simplify3d settings for this mask?
Can you make a bullet proof one
Super stuff you can do you can tell me your settings from the CR-10 in Simplify
Hey Man! If you could share with us the 3D printer settings I'd really aprendido it. Im getting this 3D printer soon and it would really help to have the correct settings! Thanks
nice! can't wait to see it painted. and the techniques you will use to accomplish it!
for that Carbon Filter effect you might want to consider the fish store, they sell carbon filters you could use for inspiration. 😋
Awesome... will check that out... I do have a potential solution that I will be trying out
Did you use infill
Uncle Jessy, I just built an enclosure for my CR10 And I'm new,a few weeks.Should I print masks in PLA "Brittle" Or Abs more flexible" to do masks ? I have a big head also.I noticed you scaled to 107% for your head.
What's the best way to determine how to scale it for your head? My Step-Son will be printing something for me & I want to make sure I don't waste his supplies.
what is better star lord captain america or thor recnarok,
hey do u do things like that for people cause I would love one of those mask for when I ride my dirt bike if u don't mind can u help me out
How long did it take.... just finishing off my Shoretrooper helmet with my CR-10, then this could be next. I already have a pepakura one.
nice
noice
It's a mask for Big Clive :oD
what 3d printer is better onder 100 or 200 dolars,
Since I'm about to order some Hatchbox PLA for my CR-10, are their suggested heat settings what you use, or do you find your own settings work better? (And of course, what settings would those be, if different?)
my estimated time of completion is about 78 hours on the slic3r software how long did it take you
soviet gaming depends on the orientation print speed and layerheivjt. .2mm 50/60 for the speed is usually around 40-60 hours if I print it upside down
What type of printer do you use, and Which one do you recommend for a beginner
Does it break easily if u bend it slightly?
I'm going to buy the cr-10 I've seen that you can change the power box from 110v or 220v but Im in the NZ were 230v is there a way to fix that.
Hi sorry i'm new to this so I was wondering how you can make masks without using infill because everyone says it just collapses if there isn't infill so I was slightly confused
Hey, what is the percentage increase ? Mine cant fit too....
Hey Uncle Jessy how do you get supports to come off so flawlessly? I can't ever do that with my Prusa or my MP Select mini. Can you help?
what % did you print it at please as you said you had to scale it up a bit
How would you add straps to the back?
So how much did you update it? We have similar face size
Please do Red Hood!
What's a good printer to start with? I'm looking at the prusa i3 mk2 and the CR-10.
DO YOU CAN MAKE PRETADOR HELMET
How much did this weight?
I'm trying to print it but it's over 1 day of printing with about 300 g of weight
What app do you use to create the 3d model and how do you set the print size to match your head size?
What material is this?
nextime im printing pink and only painting half black LOL
Hey i love your work!! What printer do you have?
I'm currently attempting to print this and when its printing the first curve (towards the forehead) its really rough as if the layers aren't adhering to each other but its super strong! Any ideas on why this may be happening??
Infill, acceleration, layer height?
I was watching one of your videos and it mentioned your Simplify3D profile. I can't seem to find it again. Any chance you can link it?
can you please make a deadpool mask and cowl
Nice! what were your print settings for this?
How much does it usually cost to get one made?
So a EU plug will make the cr-10 work in new zealand
How do you mesure your head
@Uncle Jessy how long it took to print that mask?
I know that guy. I follow him on all printing file sites
#notifications
Hi uncle jessy, i was wondering if the cr10 s4 is avaible at amazon so i can use your links to help out!. I see the normal one but not the s4 altho i think the normal one is big enough right? Since tiny machines doesnt ship were i live well i have to go with amazon. I hope amazon is better then gearbest.... ive seen alot of issues with them.
Armored Charlie appreciate it. I've found that the CR-10 is more than enough for most of the projects I'm printing. On Amazon look for CR-10 Plus which is the same as the S4. If you click on any of my Amazon links below it will count towards that. Appreciate it man! And enjoy the printer. Loving mine
@UncleJessy I forgot to ask, when downloading your profile to simplify3d, i dont have to touch anything? all the settings for the cr10 are there? all i have to do is rotate and place the parts or is there more to it? and will it work with helmets or any other 3d print or each 3d print need a specific setting? because i though your profile was 1 setting for everything so we dont have to tinker with those settings.
Armored Charlie more or less you are good to go. You will have to rearrange on the print bed/rotate etc, and decide if you want supports or not. I will occasionally increase or decrease the infill% (how solid the print is) depending on the project.
alright so all i have to look out for is the infill% and if supports are needed or not? basically everything else i leave it as it is.
How do I download this template?
What scale did you use? Thank you :)
107% ... hope it helps
Thank you
make a flash
The full mask, at 100% is 2mm taller than my print area... Damn...
hey uncle you need mask of army of two : 40 days is very nice
Would you sell me one of these Death stroke masks?
7.4.21
Serus
Hey please say hello :( ...
I'm 11 my name is ryan
Hey, thanks for checking out the video!
if you print fortnite characters youll get heaps of views
How do I download this template?