To echo everyone else`s sentiment. 1) there is no head gasket. 2) He didn't apply engine one or torque lube to the bolts. 3) He didn`t use an assembly lubricant or engine oil on the parts he installed. 4) I wouldn`t use an impact drill on a cylinder head, I do use an impact on a lot of things, it really is a time saver, but if you cross thread a bolt you are in a world of hurt. As a side note, it is not 'tourqued' as the text displays around 4:02. Starting this engine sans head gasket, and without some sort of lubrication would have been a horrible idea. Even if you primed the engine you still have metal to metal contact that needs to be lubed while you are priming. It looks like this guy was making videos as part of a class, and he did a decent job with the video. Please do not follow this guide, there are better resources out there for proper installation of a head.
wow. pretty sad when you make a video and don't know what engine u r working on, plus gonna have to take off the head again cuz u forgot the headgasket.
I went 2 steps more and torqued it to 65Lbft or 780LbInch because 3 other d16's that I followed torque instructions leaked compression. Machined head and flat block. Plus I remember that wen you remove a head from a unmolested Honda engine you need a pry bar or a pipe on the end of your ratchet. So les than 50lb doesn't convince me.
Hi. Could you please tell me the head bolt torque specs details of nissan tiida latio 2005. I am going to change new head gasket. 1.5 petrol at engine?
I was wondering the same thing I didn't see no head gasket on there and this is the first time I seen somebody put the cylinder head with the head bolts on it I always put the head bolts after the cylinder head has been placed on the Block
i have a question... what is the torque specs for main bearings on the crank shaft of a 1994 nissan d21 pickup. 4cylinder , 2.4... 145.8 cubic engine size
dont think would like these guys to work on my vehcile .. however theres money in makin theses videos .. thiink he should stick to that .. not car motors .
Vidio is good. But I know how to every thing hear. Just give me. Tork specs. And the questions asked. Definitely the do not know how 2 do it. . NUMBERS PLEASE.
I've asked 15 different times, torque specifictions Head, intake, and peplum specifications for 2008 Chrysler Pacifica 4.0L and you have given me everything from Ford's to Chevy's. But not what I asked for. Now please let me know how to proceed with acc
No head gasket? Didn't you at least watch this video before you uploaded it? I guess I'm right at kne thing I say. Just because your profession is a "mechanic", it doesn't make you professional. Don't make any more videos. You're misleading people
To echo everyone else`s sentiment. 1) there is no head gasket. 2) He didn't apply engine one or torque lube to the bolts. 3) He didn`t use an assembly lubricant or engine oil on the parts he installed. 4) I wouldn`t use an impact drill on a cylinder head, I do use an impact on a lot of things, it really is a time saver, but if you cross thread a bolt you are in a world of hurt. As a side note, it is not 'tourqued' as the text displays around 4:02. Starting this engine sans head gasket, and without some sort of lubrication would have been a horrible idea. Even if you primed the engine you still have metal to metal contact that needs to be lubed while you are priming. It looks like this guy was making videos as part of a class, and he did a decent job with the video. Please do not follow this guide, there are better resources out there for proper installation of a head.
What is the torque for head cylinder bolts on a 2006 dodge sprinkler 2.7
wow. pretty sad when you make a video and don't know what engine u r working on, plus gonna have to take off the head again cuz u forgot the headgasket.
Thanks for the video I'LL remind my self not to forget the gasket.thanks
Hello!
Need help please!!! We have a Mbenz W245 B170. In need of the head cylinder's big end bearing torque settings
What is torque number for camsalft 2l toyota engine
I went 2 steps more and torqued it to 65Lbft or 780LbInch because 3 other d16's that I followed torque instructions leaked compression.
Machined head and flat block.
Plus I remember that wen you remove a head from a unmolested Honda engine you need a pry bar or a pipe on the end of your ratchet. So les than 50lb doesn't convince me.
i wonder if he knows he forgot the head gasket.
Thank God I wasn't the only one that noticed that.
Don't need that kind
😂😂😂
He’s on a budget
That's a great question
300 videos on the cylinder head
N no one has made one on the actual block or the crankshaft
😢😢😢😢😳😀.
Hi. Could you please tell me the head bolt torque specs details of nissan tiida latio 2005. I am going to change new head gasket. 1.5 petrol at engine?
Funeral music for putting a head on enough said 😄
Lol
What engine is he doing,of what help is it us if we don't know,how about bolt tensions?
I was wondering the same thing I didn't see no head gasket on there and this is the first time I seen somebody put the cylinder head with the head bolts on it I always put the head bolts after the cylinder head has been placed on the Block
first time iv seen that done.no head gasket.lol
No torque angle settings?
i have a question... what is the torque specs for main bearings on the crank shaft of a 1994 nissan d21 pickup. 4cylinder , 2.4... 145.8 cubic engine size
What is the torque number
where is the head gasket?
Whats the torque specs
To all the experts in automobility, the gaskets seal seats in a groove bellow the rocker cover. I am 99,9 % sure he hasn't forgot it.
I think this kinda job requires a head gasket. I'm no professional but that seems necessary
This type of engine doesn't need head gasket
No head gasket AND wrong torque sequence? Nice 😂
Beautiful! One question though, how do you know how much pressure to apply to the bolts? How you calculate that?
There’s actually a electronic wrench that can be bought or rented to use that tells you.
@@deactivated0057 what brand?
am asking the 850j dozzer torque on cylinder head boots
What engine is it
What do you mean you torqued it another way? If you have angle you have to do it
Come on guys everyone knows you don't actually need a head gasket just tighten the bolts a lil more it might work 😂😂
That has actually worked on my old Ford Falcon when on a long trip as a temporary fix.
Excellent video he must be a teacher in college.or a master mechanic.l hope he makes more videos.thanks,fantastic,unbelievable .
But, Idk if he's gonna take it apart again and put the head gasket or just showing how it's done but, ????#headgasket nooooooo!
You can use silicone only or egg yolk instead.
guys theres no gasket and a missing bolt for the crankshaft 😂
U didn't use any gaskets
Beautiful video are you in cali
k248A i need the torque specs for start and intake manifold thank you
1KR 3 cylinder engine cylinder head bolts specs
Alfred liu , that was my thought first about the gasket but looked again and the gasket was there
I am looking for the torque setting off 1800fe engine for mazda
what's ft stand for?
That's not a proper pattern, should never be moving to a head bolt on the same side as the one you just torqued.
harshgreen I was saying the same thing lol
I think he'll opening back I don't seen any head gasket 🤷♂️
no head gasket???? uhhhh ok
Head gasket tak pasang ker bro?
lupe ar tuu hahaa
hi can someone assist me I have a 318i e46 looking for settings how much must the top bolts be torque
,150lbft
What about the head gasket 🤣🤣🤣
U teach us or ask to lisent the music or watch how u work ???
Gasket name Casper
it was a core engine just to teach haha.
You are correct sir! Haha 😄 i look back and watch this video to cringe myself out 🤣
It’s a diesel
As much use as an ashtray on a motorbike.
Its a metal head gasket.
Thanks
Touque setting for Nissan sentra 1.4 cylinder head
20 ft lbs for the final torque? What???
This guy is crazy?
dont think would like these guys to work on my vehcile .. however theres money in makin theses videos .. thiink he should stick to that .. not car motors .
Well now!!! i think he's using the top of the line._(Invisible head gasket!!!
Error where's the head gasket
What is the point of this video,how not to do it ?
hmmph i came hear to see if what im doing; setting a ford focus 2012, 2.0L head torque specs rite instead im seeing a honda accrd
Vidio is good. But I know how to every thing hear. Just give me. Tork specs. And the questions asked. Definitely the do not know how 2 do it. . NUMBERS PLEASE.
I've asked 15 different times, torque specifictions Head, intake, and peplum specifications for 2008 Chrysler Pacifica 4.0L and you have given me everything from Ford's to Chevy's. But not what I asked for. Now please let me know how to proceed with acc
What kind of engine is this?
Sandra Castellanos honda B16
11543 cylinder
NO Head Gasket?? BRUHH??????
Tighten bolt at last with 20fp.that is very very less than of recomended
Ok no enrollment for that course.
Yap I don’t see any head gasket there
No head gasket? Didn't you at least watch this video before you uploaded it?
I guess I'm right at kne thing I say.
Just because your profession is a "mechanic", it doesn't make you professional.
Don't make any more videos. You're misleading people
not michanic thats is barber man he dont know hiw to fix the head of engine
This was dramatic...
Head gasket ??🤦🏻♂️🤔😂😂
B16🤨
Guess he doesn't know how to write on here
That's a D series motor
O C B series
gustavo santoyo b series is DOHC there's only one cam on this one
😂😂🎉❤
Need all get off here
Sloppy.
No head gasket.
Honda fuckt up
Wtf
kalaj moteur sprinter mirsidis mirsi
D16Y5
What engine is this?
Yo send he back to school the gasket name Casper.
It's not a Rolls-Royce.