Hey Capt. I was wondering. Can you make removable air tanks, so you could switch them out on the fly for more efficiency? I thought of that idea when I saw a Super Soaker Drum that holds water.
So glad I found this today I was trying to figure out what was rong with my strong arm (I opened it when i was 8ish) and I messed up the catch and I found the problem but dropped the spring and rolled over it with a chair i didnt know i could use pen springs and now my 3rd nerf gun works again I'm very happy
i was wandering if you can put direct plunger into old blasters. like the maverick and see if it still shoots. i think it could really troll some one if it could work like that.
You can, with enough epoxy, do anything. I have seen someone integrate the back end of a nitefinder onto a maverick, so that the trigger still rotated the maverick cylinder and also pushed on the nitefinders sear. It certainly didn't look stock, as it became straight pull prime from the nitefinder instead of the slide from the maverick. If you wanted it to LOOK stock, then you'd have to find a plunger tube that fits inside the maverick body, which is very thin so you wouldn't get a big one, and then rework the sear catch as the original only really works with the indirect plunger. All in all, it's very doable, and if you ruin it it hardly matters as there are more nerf mavericks than grains of sand on this planet.
could you do a monday mod tips on faux barrels like how with springers you want a different size, flywheel you want a different type... And so forth, I heard someone talk about it somewhere.
Very resourceful , reusing springs you find off the ground
.....I've done that
Could you do a Monday mod tips on different barrel materials such as brass cpvc and aluminum and PETG?
Only 2 I meant all in one episode to show off some advantages and disadvantages of each one
Hey Capt. I was wondering. Can you make removable air tanks, so you could switch them out on the fly for more efficiency? I thought of that idea when I saw a Super Soaker Drum that holds water.
I'm sure it is possible...but definitely not with the effort.
Paintball HPA tank?
So glad I found this today I was trying to figure out what was rong with my strong arm (I opened it when i was 8ish) and I messed up the catch and I found the problem but dropped the spring and rolled over it with a chair i didnt know i could use pen springs and now my 3rd nerf gun works again I'm very happy
i was wandering if you can put direct plunger into old blasters. like the maverick and see if it still shoots. i think it could really troll some one if it could work like that.
You can, with enough epoxy, do anything.
I have seen someone integrate the back end of a nitefinder onto a maverick, so that the trigger still rotated the maverick cylinder and also pushed on the nitefinders sear. It certainly didn't look stock, as it became straight pull prime from the nitefinder instead of the slide from the maverick.
If you wanted it to LOOK stock, then you'd have to find a plunger tube that fits inside the maverick body, which is very thin so you wouldn't get a big one, and then rework the sear catch as the original only really works with the indirect plunger.
All in all, it's very doable, and if you ruin it it hardly matters as there are more nerf mavericks than grains of sand on this planet.
You know there is a way to male costum plunger heads right
If you can make a plunger head, then you can convert a maverick to direct plunger.
cap I'm about to go goodwilling would you want any blasters for parts if I find any?
Not really.
Captain Xavier I think outta of anyone in the hobby you're the last person people should be asking if you need one for parts
could you do a monday mod tips on faux barrels like how with springers you want a different size, flywheel you want a different type... And so forth, I heard someone talk about it somewhere.
Do a Monday mod tips how to get a perfect seal without being too much drag
Yes a mod tip on fixing seals will be good
Instablaster...
You might also want to check out mechanical keyboard switch springs
What's the easiest way to find a catch spring that has sprung away?
With a powerful magnet.
@@CaptainXavier Thanks! Now my retaliator can catch!
The real question is: can you create a bullpup Stampede?
Have you heard of or seen the new Nerf Rayvenfire
Yes
Captain Xavier will you mod one?
No
Captain Xavier why not? You could make a modular rayven
What’s your opinion on “upgrading” the trigger springs? I’ve considered it but I’m unsure how it would effect everything else and the release etc
Why would you upgrade the trigger spring?
Please help. I have a Rampage and have a spring that 12kg. Do you know of a good strong catch spring that can handle that load?
Fastenal #155 is what I use.
Could you do a mod on the desolator
Hey Caption, Does you choice still stand on your stravan commissions since there is now a new one you can buy or has it changed?
Why would them producing a Rayven of a different color effect my stance on Strayvens?
Captain Xavier I thought it might change because they would be easier and cheaper to obtain. Sorry.
It was never about price. It was about not committing a sacrilege to the Gods of War. :P
Captain Xavier Okay. Thanks for your input.
What's the highest spring load that these springs can handle?
+Wayne Lim I have not idea. I would bet the shell would fail before these speings do though.
Captain Xavier aight
can k26 be a catch spring?
eightdot no hmmm interesting question. Not sure the answer though.
If the blaster was the size of a semi-truck maybe...
Captain Xavier
so what your saying is that yes, k26 can be used as a catch spring?
Imagining the monster gun that needs a k26 to catch....
Can a D-Cell Mag-Light take a K26?
Obviously...
you saved me i just lost mine and came here but then you said mechanical pencil and I had one in front of me!!!!!!!!!!!!
Yeah post at midnight, that doesn't make me wanna cry
It was 9pm here. No matter when I upload it will be midnight somewhere.
The Bread Man 5 o'clock Tuesday morning for me
Captain Xavier it's high noon somewhere in the world
Thank you for another very helpful resource
Hey look how long the vid is!
*NICE*
Do vacuum loading
Make a ballistic knife eir attachment
I already have...
How
go cap
Hi
Hello
19