Maaan, great video about this f. problem we all may have down the road, this emission system is and can be one of our worst nightmares if you don't know how to apply a process of elimination. You just taught us all here exactly how to do it. Very much appreciated it's helped us to deal with this shit
You did a fellow driver a big favor. Thanks a whole lot !! Now remember, a thousand atta-boys are canceled by one aw shit . Your dispatcher will only remember the bad stuff.
Just hold the OVRD button in the UP direction and the Regen button in the UP direction also, BOTH at the same time for about 20 seconds and it will start a Regen even though the check engine light is on
Bro thanks so much for this video. Was just about to pay a hefty tow bill and I saw this video.. stuck out here in wyoming for 5days now and this truck start acting up. This really help me. Owe u a drink my guy. Haha
I have a 2019 freightliner I was driving through West Virginia and it couldn’t even handle the inclines then when I drove at normal grade it couldn’t go more than 55 mph
Great, Great video it actually worked!!! I tried it at first like he did with the regen button and it didn't work! Then I tried doing what he did the 2nd time and it worked 💪!! The regen happened
You can also disconnect the transmission sensor and that will let you driver over 55 mph, though I was told by a mechanic that if you drive for extended periods like that let's say 6 or 8 hrs it can damage your engine, but I am thinking that if you let it cool down for a couple of hours (in cold weather, more if you are in florida) I believe it could be fine to even drive it for over 24 hrs, that it is just my believe.
DESI TRUCKERS IN U.S.A but with the regen tool will it come on again and if it come on again you just used that tool again I’m guessing? Unless u fix it I just got this issue on truck man
Thx bro.. my truck just went into regen.... I'm stuck on the highway n was about to call a towe...freightliner said truck wouldn't regen because I needed a cpc , which is on back order 180 days...smh.
My truck has been doing the same thing. Two engine lights on and def light is blinking. It has happen about 3-4 times but my truck has been able to regen when pressing the regen button and it goes away. It happen two days in the row and that’s unusual for my truck to regen that often because I’m local I’m not otr. Usually I’ll have to regen about every 3 days when working. I’ll be getting the whole system deleted soon by the grace of god hopefully it doesn’t cause me no more problems before I can have it deleted. Thanks for the video, I’m a female driver I dnt to much about mechanical issues.
Thanks for this video . I have the same problem from time to time during my driving When the light comes on I stop for sometimes until the engine light turn off than I countnie driving no idea why this keeps happen from time to time my truck frieghtliner Cascadia 2016 . Can you tell me please What the mechanic said after diagnostic done ?
It need regen. Mostly when we idle the truck we will have this type of problem. Mine is also 2016 truck and I bought forced regen device. Look my other video and buy one. I forced regen every week or 2.
I have same problem 2017 Frightliner cascadia not take regen no code active but have plain engine light check engine light and def light flashing derate to 55mph and after 275 miles light goes off start working fine
I cant find the power cut off switch in my 2015 freightliner cascadia its not on the floor near the driver's side door in mine. Anyone knows where it would be please let me know.
Ok so update... turns out my truck wouldn't regen because the check engine light being on prevents it and the whole issue was the whole DEF pump under the truck was leaking and not actually doing its job so once it was replaced every light on the dash went bye bye. Woot woot.
Why doesn't it do it automatically why does the truck driver need to pull over to do it that's silly I've never seen a system like that before on any car or van here in Europe
If you don't have a battery kill switch in your truck at the bottom of your driver seat Disconnect the positive battery terminal on your battery terminal for 15 to 20 minutes & re hook it again then start the regen process
@@desitruckersinu.s.a2797 hello bro I have same issue, trying everything but not working, i am on a truck stop can you help me out, i dont have that switch, its same truck 2016 cascadia
Maaan, great video about this f. problem we all may have down the road, this emission system is and can be one of our worst nightmares if you don't know how to apply a process of elimination. You just taught us all here exactly how to do it. Very much appreciated it's helped us to deal with this shit
New to a cascadia and just started with a new company. you just save my ass with this video ! Thanks brother and drive safe !
Thank you thank you 🙏 I was about to give back my load an go a to freightliner dealership. You are a true blessing
Thank you so much sir,this really helped me out!!!Apreciated it!!!
You did a fellow driver a big favor. Thanks a whole lot !!
Now remember, a thousand atta-boys are canceled by one aw shit . Your dispatcher will only remember the bad stuff.
Thank you. Great video and very detailed. Happy New Year!
Just hold the OVRD button in the UP direction and the Regen button in the UP direction also, BOTH at the same time for about 20 seconds and it will start a Regen even though the check engine light is on
Bro thanks so much for this video. Was just about to pay a hefty tow bill and I saw this video.. stuck out here in wyoming for 5days now and this truck start acting up. This really help me. Owe u a drink my guy. Haha
This is really helpful, just happened to me and able to fix by following your videos. Than you so much
Thank u for your detailed explanation!
Thanks man, I needed that info, followed all the step and I was able to do regen.
Thank you buddy! It just help me to continue my trip🤙
Awsome
Thank you I will help as many people as possible and share it
This worked for me thank you bhaji
Thanks boss it really works on my truck
Great job on the video👍🏻
Thanks 😊
THANKS BROTHER THIS VIDEO SAVED ME SOME MONEY! GOD BLESS YOU
Glad to hear that.
2016 freightliner worked... thanks 🙏
I have a 2019 freightliner I was driving through West Virginia and it couldn’t even handle the inclines then when I drove at normal grade it couldn’t go more than 55 mph
I never expected this works for me but it worked thank you so much bro, you are hero 👍
This was helpful, Thank you .
It is working for 2011 FRHT with check engine light on.
Very helpful information. Thanks a lots
glad it helped۔
Just set the cruise when you get to 55 mph and it will go up to 65 and work itself out. I had this continuous problem with a 2016 truck
That fuckin shit worked, thanks fam.. you saved me not only my load but 1000's of dollars!!
Thanks bro it worked for me..... appreciate it ✌🏻💯
Thank you 😊
Thanks buddy, It did work for me for the first time.
Thank you so much it's working
Thanks bro, really helpful
You saved my day thanks
Thank you.
You the man Desi.
thanks :)
Great, Great video it actually worked!!! I tried it at first like he did with the regen button and it didn't work! Then I tried doing what he did the 2nd time and it worked 💪!! The regen happened
2015 cascadia regen did it but after a while lights came back on dont know what do to
What if it’s an automatic do I still put it in gear then neutral
You can also disconnect the transmission sensor and that will let you driver over 55 mph, though I was told by a mechanic that if you drive for extended periods like that let's say 6 or 8 hrs it can damage your engine, but I am thinking that if you let it cool down for a couple of hours (in cold weather, more if you are in florida) I believe it could be fine to even drive it for over 24 hrs, that it is just my believe.
Paji weren’t you using the OTR regen/reset tool? I saw one of your previous videos where you showed how to use the tool.
Yes. I didn't had it. If I had it I didn't have to go through all this. Lol
DESI TRUCKERS IN U.S.A but with the regen tool will it come on again and if it come on again you just used that tool again I’m guessing? Unless u fix it I just got this issue on truck man
Thx bro.. my truck just went into regen.... I'm stuck on the highway n was about to call a towe...freightliner said truck wouldn't regen because I needed a cpc , which is on back order 180 days...smh.
Don't listen to freightliner and get 2nd opinion.
Remember if u take off the switch u can drive without regen
@@desitruckersinu.s.a2797 the Regen switch on the dash?
My truck has been doing the same thing. Two engine lights on and def light is blinking. It has happen about 3-4 times but my truck has been able to regen when pressing the regen button and it goes away. It happen two days in the row and that’s unusual for my truck to regen that often because I’m local I’m not otr. Usually I’ll have to regen about every 3 days when working. I’ll be getting the whole system deleted soon by the grace of god hopefully it doesn’t cause me no more problems before I can have it deleted. Thanks for the video, I’m a female driver I dnt to much about mechanical issues.
Pain in the butt, I’m going through those issues now.
Having this problem now need help asap
That was helpful. Thank you for nice video .
Thank u 💓
This happens to me every time after the rain 🌧, same today in Ohio always something not good happens to my truck in Ohio
Sorry to hear that
Me too every time after it rains
Same place mines started... Ohio on i71 on my way to Kentucky in the rain
I realize I am quite off topic but do anyone know a good place to watch new movies online ?
@Alden Jamal lately I have been using FlixZone. You can find it by googling =)
I tried that. Still want do a regen
Same issue. Did a Regen. Clear the DEF blinking light. Had my Def tank cleaned out a few days ago, but still some issues though. Smh.
Does That happens after you idle truck for long time?
@@desitruckersinu.s.a2797 I should have given an update. A few days later my truck ran normal again.
Thanks for this video .
I have the same problem from time to time during my driving
When the light comes on I stop for sometimes until the engine light turn off than I countnie driving no idea why this keeps happen from time to time
my truck frieghtliner Cascadia 2016 .
Can you tell me please What the mechanic said after diagnostic done ?
It need regen. Mostly when we idle the truck we will have this type of problem. Mine is also 2016 truck and I bought forced regen device. Look my other video and buy one. I forced regen every week or 2.
Where you bought your force regen device plz
Cuz I have this problem few times
Thanks it works
You're welcome!
Cars don't seem to have too many problems with the DPFs But I don't have a diesel so I don't know
2019 western star with dd13 didn’t work
I have same problem 2017 Frightliner cascadia not take regen no code active but have plain engine light check engine light and def light flashing derate to 55mph and after 275 miles light goes off start working fine
Bhaji I get same problem
2 weeks ago I fixated from Frifghtliner . That time I got red light engine sing also
Now solid engine sing check engine sing and def light blinking
It worked for my 2014 FRHT. Thank you!
I cant find the power cut off switch in my 2015 freightliner cascadia its not on the floor near the driver's side door in mine. Anyone knows where it would be please let me know.
Ok so update... turns out my truck wouldn't regen because the check engine light being on prevents it and the whole issue was the whole DEF pump under the truck was leaking and not actually doing its job so once it was replaced every light on the dash went bye bye. Woot woot.
thanks for the update. also if u dont have switch disconnect power/ground cable from battery for 15 minutes to reset.
Ok
My truck the exact same thing, I can’t get it to regen though. Smh
It’s a great info and thanks for sharing
bro will it work if stop engine light comes on ?
Yes
My Freightliner doesn't have that power knob. What do I do
Buy otr device and forced regen your truck. Its so helpful.
If you're truck doesn't have a Power Cutout Switch, then just disconnect the positive battery posts (all positive connections) for 20 minutes.
The censor plug is bad , Located on passenger side. Remove step and check your connection first
Just tried this step for step on my 2016 Cascadia and it ain’t work bro. Limping back home now
Ok after driving derate about 40 minutes I got full power. 1 engine light still on tho. At least I ain’t limping no more. Thanks
Not working on 2017
I get something today know I can’t move I have to wait Monday some one 2016 def lights check light engine light
What happen did you fix it, why didn't work,, same to me
Buy the forced regen device it will help in emergency situation and save time and road service
Nox sensors and get your Filter clean egr clean as well happen to me last month in Phoenix Arizona 8 days in the Hotel
@@doggtownryker7645 is your truck good now i have same problem nox sensor on back order
Not working for me. 🤦🏽♂️
Why doesn't it do it automatically why does the truck driver need to pull over to do it that's silly I've never seen a system like that before on any car or van here in Europe
🙏🏽🙏🏽
If you don't have a battery kill switch in your truck at the bottom of your driver seat
Disconnect the positive battery terminal on your battery terminal for 15 to 20 minutes & re hook it again then start the regen process
you are right i missed that.
Why 15 to 20 minutes?
@@TheLORENA38 , so your ECM/ ECU can reset by taking away the power for 20 minutes.
Did have to get work done to your truck after this video dealing with its issue .
It just needed regen. It happens mostly when we idle the truck.
I'm going to delete my def fuck it too many problems
Hopefully no more issues after that.
Did you ever do it and did it help?
This not help on my truck ???
remove sensor from transmission watch my other video۔ you can drive to shop۔ good luck
@@desitruckersinu.s.a2797 thank you so much.,you are the Man 👍👍👍👍
I dont have that kill switch
disconnect ground cable from battery
@@desitruckersinu.s.a2797 hello bro I have same issue, trying everything but not working, i am on a truck stop can you help me out, i dont have that switch, its same truck 2016 cascadia
For not working.... RGEN ... maybe need computer connect
Use the forced regen device
Check my new video for bypassing 5miles speed limit restrictions
3:51 reset procedure here
Spn code 3238 fmi 2 mines won’t regen at all 2016 Cascadia
Same problem here
You need forced regen use device to that.
10:27 sensor check
Didn’t wor😢