This stopsign shaped Red light came on and then shut off my engine in 10 seconds. ( 2014 durastar International 4300) coolent Leval was "Below " engine cold Leval..I added 3/4 gallon coolant to full Line. Problem solved.No more Red Light.no more engine shutdown. Thank you for this video..Owner Operator here..
Great advice on this subject. Having bought a diesel car recently with very low oil I drove it home carefully a few kilometres. Now I’ve drained the little engine oil that was in and put 4,5 Liters of synthetic new oil.All other fluids are to the top level.Do I need to start car to get rid of dashboard red stop light as it’s still on when the sump is full ?🤘👍🇬🇧
Hey my guy my stop light came on and all of my readings on my dash were alright air pressure temp and the oil pressure was between 30 and 40 psi I checked the oil level and the coolant level added to the coolant level and oil as well, and I have never had a stop light indicator before and when the stop light did come on there was no decline in the power of the truck, so as I continued driving to my destination the stop light went out and the beeping stopped, I began to believe that the coolant level was perhaps too high or I may have put in to much oil.I am at a lost for what could be the problem as my dpf is not low and I bought some def from O Riellys and put it into my def tank could I have gotten some bad def from this place ? who know,. I am not loosing any power and as you have stated no driver wants to see or hear that sound of a stop engine light to come on. please comment on what could be going on or do I get a Jpro done at a mechanical shop.
It could be a problem with the coolant level sensor, if this is an intermittent issue, perhaps you could let a technician to check with a Cummins software, if the problem comes back again (on and off), the ECU will save the code and you will be able to know why the stop lamp turns ON. JPro might be helpful as well to know why the stop lamp is ON.
Perhaps it is a electrical issue (for example: alternator might be overcharging) relate it to the Instrument Cluster (ICU) the proper diagnostic tool is need it in order to know where to start to look into this matter. Thanks for watching.
Stop lights usually turn on for a reason, perhaps with a proper tractor software (depends of your tractor manufacturer) you will be able to find the path to fix it. Thanks for watching.
Just recently changed my oil. Didn't have this problem before. Orange engine light comes on first, 3mins later stop engine light comes on. Could my oil level be to high?
Not really, perhaps it is another issues, it is not common after an oil change the amber and red light to turn on. Make sure your oil pressure is fine, also if this continues every single time you start the truck better to take it to repair shop where they can hook up a computer to see what is going on. Thanks for watching the video.
This stopsign shaped Red light came on and then shut off my engine in 10 seconds. ( 2014 durastar International 4300) coolent Leval was "Below " engine cold Leval..I added 3/4 gallon coolant to full Line. Problem solved.No more Red Light.no more engine shutdown. Thank you for this video..Owner Operator here..
I hope thats what my probelm
GOD BLESS YOU
God bless your family and life.
Great advise and explanation. He really made it easy to follow along.
Great advice on this subject. Having bought a diesel car recently with very low oil I drove it home carefully a few kilometres. Now I’ve drained the little engine oil that was in and put 4,5 Liters of synthetic new oil.All other fluids are to the top level.Do I need to start car to get rid of dashboard red stop light as it’s still on when the sump is full ?🤘👍🇬🇧
Thank you. Found this helpful
It just works for me
Thank you!
What kind truck you have ?
What kind truck you have and what was happened ?
My triangle light is going on and off while I’m driving 😊
Where are you are located I have five Volvo trucks I need a mechanic like you sir
Great offer !👍🇬🇧
La pipa le apareció el código stop 🛑 si prende camina pero baja velocidad que puede ser la falla ?
Hey my guy my stop light came on and all of my readings on my dash were alright air pressure temp and the oil pressure was between 30 and 40 psi I checked the oil level and the coolant level added to the coolant level and oil as well, and I have never had a stop light indicator before and when the stop light did come on there was no decline in the power of the truck, so as I continued driving to my destination the stop light went out and the beeping stopped, I began to believe that the coolant level was perhaps too high or I may have put in to much oil.I am at a lost for what could be the problem as my dpf is not low and I bought some def from O Riellys and put it into my def tank could I have gotten some bad def from this place ? who know,. I am not loosing any power and as you have stated no driver wants to see or hear that sound of a stop engine light to come on. please comment on what could be going on or do I get a Jpro done at a mechanical shop.
Could you tell me what kind of truck are driving and the year?
@@LetstalkDIESEL I am driving a 2014 International Pro Star With A SX-15 Cummings Engine.
It could be a problem with the coolant level sensor, if this is an intermittent issue, perhaps you could let a technician to check with a Cummins software, if the problem comes back again (on and off), the ECU will save the code and you will be able to know why the stop lamp turns ON. JPro might be helpful as well to know why the stop lamp is ON.
My light came on, but coolant is fine everything is fine and no leaks or smoke...I have a 2012 international 4000
all lights on dash come on and low air alarm comes on only when going 65 mph or higher any suggestions please
Perhaps it is a electrical issue (for example: alternator might be overcharging) relate it to the Instrument Cluster (ICU) the proper diagnostic tool is need it in order to know where to start to look into this matter. Thanks for watching.
my dads truck has a stop! triangle on but doesnt tell us why its on and it wont start no matter what🤔
Stop lights usually turn on for a reason, perhaps with a proper tractor software (depends of your tractor manufacturer) you will be able to find the path to fix it. Thanks for watching.
Just recently changed my oil. Didn't have this problem before. Orange engine light comes on first, 3mins later stop engine light comes on. Could my oil level be to high?
Not really, perhaps it is another issues, it is not common after an oil change the amber and red light to turn on. Make sure your oil pressure is fine, also if this continues every single time you start the truck better to take it to repair shop where they can hook up a computer to see what is going on. Thanks for watching the video.
My triangle light is going on and off while I’m driving 😊