all these videos are really helpful!! I just did my six piece and fog lights in about 45 minutes,the new plastics and fog lights give my fox a whole new look in the front! thanks
The center light has 3 clips. Two clips on top are easy, but to remove the bottom clip, is easier to remove the corner light first than the clip becomes easier to get to. If you got a easier way please let me know.
@@latemodelrestoration i buy alot from LMR cant beat the price.s or service and quality LMR has allways done me right im ordering new windshield banner had to replace windshield i like to advertise LMR
Is it normal for the sylvania bulb part no. 9004 to need a little force to shove into a new 6 piece headlight housing? Just got mine to ditch these one piece and the 3 teeth tht the bulb slides into doesn’t seem to line up right
Would you guys be able to do a video talking about seals for a t-top fox? my 87 is in some need of some seals and its a little confusing as to what i need to buy if i want to replace the seals for the t-tops as well as the doors
First, I just tried to change my light bulb today and my bulb retainer came completely off and I can't get the light bulb out. I don't know how this one just came out separately when mine came out together.
I have a 87 2.3 4cyl and its hard to get it started and when do it run rought when I give it gas it wants die and has no power what can cause this thanks
Could be just about anything. Without having the car here we can't really help. Best thing to do is take it to a mechanic and/or go through the usual maintenance plugs, wires, battery, electrical system ect ect.
all these videos are really helpful!! I just did my six piece and fog lights in about 45 minutes,the new plastics and fog lights give my fox a whole new look in the front! thanks
We try hard! We do it all for you fellow Mustang Enthusiasts!
Interesting video on how to..... Actually, didn't show squat!! That's as nice as I can put it!
Rt literally showed us nothing
Quality videos, I’ll probably watch every single Foxbody video y’all make!
Thanks, Simon! -Landan
knew I was missing some pieces, thanks for the video
What size is the bolts for my new clear lens
The bolt size is 7/16" or 11 mm! 👍
You guys are the best!
Come to Central Texas and he might just make it happen.
The center light has 3 clips. Two clips on top are easy, but to remove the bottom clip, is easier to remove the corner light first than the clip becomes easier to get to. If you got a easier way please let me know.
Ive bought these from LMR and i love.em there really nice and very durable
That's great to hear Tim! Thanks for shopping with us!
@@latemodelrestoration i buy alot from LMR cant beat the price.s or service and quality LMR has allways done me right im ordering new windshield banner had to replace windshield i like to advertise LMR
@@latemodelrestoration thank u for reliable parts and awsome customer service there great
I’d love to see him spend an entire day trying to get the old ones out like I did😂 worst thing I’ve ever had to do
Yeah, the first time changing out headlights in a Fox Mustang is terrible. -Landan
JMac approves of this message!
W video helping me do mine right now!
We're glad the video helped you out! Thanks for watching. -Landan
For the right amount of money I'm sure Jmac would travel ;) lol
Its only my opion but LMR is awsome cant beat the parts and prices i built a 347stroker from LMR and its nasty thank u LMR
How about changing the driver side that seems to be the one that is a pain to install that's what needs to be shown how do you get that one off?
can you do a video on the one piece headlights everyone says its a hassle and I want to get the one piece.. they say wiring and stuff is involved...
Is it normal for the sylvania bulb part no. 9004 to need a little force to shove into a new 6 piece headlight housing? Just got mine to ditch these one piece and the 3 teeth tht the bulb slides into doesn’t seem to line up right
Where's the adjustment video been looking can't find it?
J Mac in da motha Fukin’ hizzie!!!!!!!!!
Can I get J-Mack to do some resto on my car? Please??
J-Macks the sh*t!!!
should note the order to remove them too. quite a pain to the back of your hands when doing this.
New York what are talking about that was easy to remove from car , guess you don't do much repair on cars.
If I live in South Florida and I’m adding sealant to ensure it’s properly sealed all around, should I leave the vent hole open?
The vent hole should be left open. -Landan
I'm trying to look for some hid headlights but with projector housing installed, could you make a video showing some hid headlights vs LEDs?
led are much better
Would you guys be able to do a video talking about seals for a t-top fox? my 87 is in some need of some seals and its a little confusing as to what i need to buy if i want to replace the seals for the t-tops as well as the doors
Damn that's a loooong way from Cleveland Ohio!
Do you do the same thing for the park light and side marker?
This video covers the removal and installation of the park and side marker lights. Let us know if you have any other questions.
First, I just tried to change my light bulb today and my bulb retainer came completely off and I can't get the light bulb out. I don't know how this one just came out separately when mine came out together.
Do these include the weather strips?
Which ones are you referring to? Most of our headlights will include the weatherstrip. Give us a call at 866-507-3786 to find out more information.
I have a 87 2.3 4cyl and its hard to get it started and when do it run rought when I give it gas it wants die and has no power what can cause this thanks
Could be just about anything. Without having the car here we can't really help. Best thing to do is take it to a mechanic and/or go through the usual maintenance plugs, wires, battery, electrical system ect ect.
where would the comeputer be located at
patrick cordery It is located in the passenger side lower kick panel
what i check the fuel pressure what should it be on a 2.3 4cyl ?
You didn't actually show how to get them out. You need to show the while process.
You forgot all the cursing and “how am I supposed to reach that”. I was lucky if skinny and young and it still look me 2 hours
Believe me, we have all been there. We have to edit out all of that or the video would have been an hour long. -Jay
😁😘😍💖 soy fea
No eres feo!
The installation video is pure BS. Hardest thing I ever tried to do, and ended up taking it to a dealer for installation. REALLY HARD TO DO.
Junk
Hi AutoInc420,
Did you have an issue with your headlights? We would love to assist you in finding a solution.