TIG Welding Titanium Fabrication - Oil Flask
HTML-код
- Опубликовано: 29 янв 2020
- Watch "This Old Tony" make the threaded bung and most of the filler cap for me in this video:
• Turning Titanium: Tria...
Buy fun "weld-it-yourself" kits here: artisan-alloys.myshopify.com/...
Parts like these don't need to be back purged if you can control your heat and not burn the whole way through. It's a non-structural part, so the welds don't need to be super strong.
Oil needs to be mixed with the gas on 2 stroke carbureted engines. With a flask like this, you can ride to the gas pump, fill the bike up with gas, and then add the proper amount of oil by measuring with the syringe.
Watch "This Old Tony" make the threaded bung and most of the filler cap for me in this video:
• Turning Titanium: Tria... 
Развлечения
never thought I'd say this to a guy (again) but: nice can!
also... TIG BUTTON backcap @ the torch?!
Hi Tony,
This torch is a "Prostar 24" model. It's great for DC welding at low amperages. It doesn't have a back cap, the collet is tightened by tightening the collet body (gas lens). It's great for getting into tight places (I used to use it a lot for welding stainless exhaust headers), and it's nice and lightweight.
(These parts you made fit perfectly, thanks again!)
This was my first thought too- where’s the backcap? Thanks for the info 6061!
This is my first 3 way with T.O.T. and 6061... I don't hate it. If A.V.E shows up, I'll tap out because 3's company and 4's a crowd.
I thought you'd say this to a guy (again).
Global Eco Tec - Ritter ohne Furcht und Tadel From what I remember from Tony’s video, it’s called a “bung ”.
If that flask was for sale, it would already be in my back pocket. Gorgeous fab work mate!
now i get it when this old tony says he's bad at welding. this is amazing
Hate to brake it to you bro. But you're not a welder. You're an artist, a master of your craft.
Dork
Awesome looking flask!! I've been looking forward to seeing this side of the build, since This old Tony did the bungs and most of the caps! Looks beautiful!
The ToT-anium bung and cap threads worked great. He did a perfect job.
Amazing how bright the sparks are off of titanium. Looks like burning magnesium bright. Very cool build.
It is. Titanium is actually rather dangerously flammable itself, if the right conditions are there. The dust is especially dangerous. And like any burning metal, you cannot put it out - class D fired are no joke. Do be careful if you ever work with titanium- know what the proper procedures are and follow them. :)
The fact that you’re left hand it makes it even more badass
That scene at the end looks like ToT riding off on his bike
Great to see those ToT parts being used! Great welding.
Awesome. I’ve been looking forward to this ever since ToT’s video
Ah, the ol' manual rev limiter. Yep, done that one a time or five.
Really like your videos on welding aluminum thanks.
When hes grinding those edges @5:40 those sparks are as bright as a welding flash! That's how I learned I was grinding something that was titanium that I thought was aluminum before I started.
Another spinning tire made me really happy^^
Salut, franchement super boulot, et toujours avec humour!!! Tu est le roi de la soudure. Great job. Thanks
Such a cool looking oil flask
Wow what a fantastic skill to have..imagine then create!!!awesome man!!!!
Nice work!! Wish that tig button wasn't soo expensive, would have bought one already..
Love the rev limiter finger. I do the same thing. Too funny. Love all your videos.
Hi. Since you did not back purge i hope you cleaned out all the titanium oxide. Because in the 2 stroke oil that oxide is not really advantagous. Looks very cool that little thing.
Nice work mate 🙌🏼
These would be cool kits to buy and weld up yourself.
Sweet. I will be making stainless headers for a turbocharger install, that GTAW button will definitely be the trick
Yup. I officially NEED to order a TIG button.
Love that "indicating" in with random taps!
Abom does not approve!
those bright white sparks are nice when grinding Ti
Might need to make one of these. Hopefully they don't try tip my "oil" out next time I bring one into a night club
😂😂😂
That thing will still exist when oil has run out
Then it’s time for a wash and refill with Knob Creek.
At the end, the video appears to be intentionally cut short. I'm sure there was a nasty sound after riding into the night with a welding helmet.
Nice Can, also top marks for the variable tig trigger button
Curious what the bulk of your business is? Always wondered what keeps the lights on. I know it isn't titanium flasks! PS Loving all the new uploads.
Cheer!
I got SOOO excited seeing this! I thought you were going to fill it with some good bourbon or scotch when you were done. :-( Oh well. Almost as good. Gorgeous work as always.
Nice as always
10:15 the revs from that husqvarna HAHAHAHAHAHAH!! Awesome oil flask
Look sooo clean 👌
i can weld, but I'm not great at at fabrication...but if i was, i could make all kinds of cool stuff for motorsports. awesome video as usual💪
... that can get better only by experience. For example i don't have welder so i cannot even get any experience.
Mantap PAK...TEMPAT OLI SAMPING...nya👍👍👍
Make a lovely hip flask, I'd buy one!
Will he ever speak hahah thanks for another great build
If we could stay on this kind of upload schedule, that'd be great... Lol
Hunter Broadhead right? 😂 it’s like one video a month and then like 5 in two days
two-stroke engines are cool
Nice working
4:14 this robot has no fear
Nice work! The colouring gives it a nice look (although it hurts a bit to see welders intentionally provoke the formation of alpha case 🥴)
Why does it bother you?
The nice blue colour is alpha case which is detrimental for the strength of the material and particularly the fatigue properties as it is prone to inducing cracks. Obviously, the flask isn’t a critical structural component. Just as 6061 pointed out in his video description. My comment was with “the glimpse in the eye” (at least that was my intention 😊). In aerospace business, blue colour = fail. Non structural components, blue(purple, pink tone) = nice and decorative 😄
@@andreaslundback is that the case with Titanium? I know, as a welder, that steels and stainless' colours aren't great, but I wasn't sure about titanium, or inconel, monel, etc...
Castor 927??? love the smell of that stuff!!
Well done
Good skill I will learn to do like you when grow up
I love welding titanium.
Nice, bro!
joins of machining titanium stuff thats tough as nails
This is weird..........stopped at a local welding supply shop, Lefeld Industrial & Welding Supplies Greenville, OH to look Milwaukee Fuel 18 cordless tools. As I was leaving I went over and looked at the welding and brazing equipment. Last time I tried welding was in high school. About the time you'd strike an arc some numb nut would reach underneath the welding booth and crank the dial to the max and throw the lever from low to high. So when you touched your welding project there was a small thermo nuclear explosion and your project was a molten blob below the grates. An hour after the welding store I suddenly come across your RUclips video. Thought about welding or learning how when I was in the store. Been a long time since I tried welding. Graduated high school in '81.
You're doing metal work for living or for just as a hobby? Grate video as allways.
really good!
Nice Husky!
Nice job :D
Daft Punk of welding!
lol love the outro :)
Thanks !
Nice video,
This is not just welder it also lathe machine 😊
you got skills
Love my TIG button!
This should cost $100 not that damn yeti crap
Well done bro. You make it look easy
It would be great to know what settings you were using for those perfect welds👍
Skill level = Maximum
Settings always depend on your skills
1.21 gigawatts
Awesome 👌🏻
Pretty sweet
Is there another way to limit the revs other than the finger? I think not😁
And here I thought I was the only one with a Rev limiting finger!?
Did you have the pulse setting on ? Or were you just turning it on and off by hand ? I use a micro switch on my TIG machine, I never use the pedal to much going on at one time. Any way that came out awesome!!
Sweet!
Where did you get the original aluminum cap and bung? I THINK they're the perfect size for my Formula F Honda's tank, and I haven't been able to find the supplier.
how is welding titanium? is it anything like stainless?
is titanium tube always seamless?, just curious, gorgeous can btw.
All high end/grade/aerospace Ti tubing is drawn not rolled
Wow complimenti👍👍💪👏👋
Hi. How much such nice things with shipping to Poland
Perfect
What is the liner made of? Rolled sheet for tight fit or ?
I was thinking about making an oil sump and valve cover out of 0.5mm grade 5. I suppose it depends on design, but do you think it would distort too much upon welding. What you are welding here looks thicker, but it looks very stable compared to welding aluminium with regards to expansion. Have you made either of these out of titanium?
Vodga flask
not gonna lie, when This old tony made the joke using it as a flask with a wide mouth, I was aware he was probably joking, but now that i've seen the finished product, i kinda want one of these as a canteen.
Shame it's probably loaded with god-only-knows-what kinda contaminants that would kill me horribly, lol
Nice 👍🏻
If you'd like a toolpost toolholder for your die grinder I'd be happy to 3d print one.
And a Y axis handle for your mill. :)
were you just using straight water for coolant cutting the tube?
Where can i buy the cap
super!
take it over the top, engraving and coloring
what do you use as coolant?
I want that
Hello, Can I weld titanium with TIG? Does it contain zinc and is it harmful titanium welding smoke ? I look at youtube and someone spoke about zinc which is very very harmful and please let me know how I can to weld titanium safetly and which metals is dainger to weld without air filter in welding shield.
Thanks
tell me more about that switch on your torch
Nevermind, just ordered it :-)
I just recently watched video that said if your titanium changes color when welding is a bad thing it means your weld is to hot and you are burning the titanium. Is this true because I see these high end titanium exhausts that look amazing with a whole rainbow of colors. Just wondering. Edit: titanium handles extremely high temps really well also not a welding just a dabbler haven’t done any tug welding either just curious.
I do the same but whit stainless steel
is that a hand control for the argon? seems like it was always coming on.
I've owned 2 two strokes and now a 4 stroke. The two stroke were fun. It's nice pissing of the neighbors that you hate. I lovre how loud they are. But they all have the same problem. Mixing gas. I hate it. I've had to get towed home because I ran out of gas and I forgot to bring oil. All me friends ride 4 strokers.
mixing gas, slapping ass
The amount of post gas for this must be bonkers
Titan ?
And when are you holding classes?
SO dope 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
"oil" 😉 Suuuuure...
Maple sirup. From Hand tool rescue :D
Like making a peace of jewelry!