🔥 The LED light bulb will never go out! Just take a pencil
HTML-код
- Опубликовано: 23 июл 2023
- The LED light bulb will never go out! Just take a pencil Hello! I am glad to welcome you to my channel, where I share with you my professional knowledge and tips on electronics repair. Today I would like to show you how to quickly and easily repair a broken led light bulb using a regular pencil.
To start, open the light bulb to check which LED is not working. To do this, you will need a wire to test each LED individually. Having identified the faulty LED, proceed to the next step.
Now take a pencil and sharpen the lead. The lead in a pencil is an excellent current conductor, and it is he who will help you in this matter. Carefully bring the sharpened lead up to the faulty LED and make sure it makes good contact with the wires. This will restore the electrical connection and return the lamp to a working state.
After completing all these steps, check the result by turning on the light. You will see that the light bulb works like new again! Restoring LEDs with a pencil is an easy and effective way to save money on buying new light bulbs.
I hope you like this result and can use this method to repair your led bulbs. If you have any questions or would like to know more about electronics repair, feel free to ask in the comments. Thanks for watching and good luck with your renovation projects!
Interesant informația. Bravo,sănătate și succes în viitor !
Clever! The graphite from the pencil acts as a resistor to avoid overloading the remining LEDs.
Excelent...gracias
Excelente innovación
Πολύ καλή δουλειά! Ευχαριστούμε!..
Watching from 新加坡 .Will follow your method to repair.God blrss
Genius. (From Italy)
Que efectivo experimento. Muy bien, a ponerlo en práctica.
Your way is good but I will do it another way ❤
Commenters below say you need to replace the bad led with a good led or the voltage will cause the remaining leds to go bad. Just bypassing/removing the bad led is not good in the long run.
very nice 👍👍👍
gracias mi hermano lo practicare
The other leds get a higher voltage so you had to mount a resister on the place of the defect one! To protect the other leds! So count the number of leds and find oud how many power the takes! And find out how many milliamps flow and find the resiter value! Or find a led out of a other defect lamp, with the same value en replace the defect one! Succes!
I agree. from japan.
The way you share is very good and can also be done in other ways to create results
You're damn right! thank you for your opinion
Hi , iam from algeria , iam too intrested with the things you do , happy to khow you .
Excelente, bueno para Cuba que tiene problemas con los apagones
我又學到了一個技巧感謝你!我在台灣收看😗
thanks
GREAT
Esta eu não conhecia, vou testar. Atualmente eu uso pedaço de palha de aço coberta com durepoxi.
* THANKS * ********
çok iyi, teşekkürler; bu arada türkiye'den izliyorum👍👍
Fakt, ostatnio niepotrzebnie wyrzuciłem taką żarówkę, zamiast zdjąć z niej klosz i sprawdzić na krótko. Oczywiscie, grafit jest przewodnikiem prądu elektrycznego, a przeto zamyka obwód w tym miejscu. Jednak bardziej trwałym zmostkowaniem, na poziomie uszkodzonego led-a, byłoby delikatne pokrycie tej perzwy lutowiem, przy użyciu lutownicy.
Gracias
i.m frommTurkey from Antalya city.
Nota 10 PR vc só que
Vc não tinha mostrado
Se era a mesma lâmpada
De LD ou era outra lâmpada
Cual es la pega ideal para pegar la tapa del bombillo?
Так только дорожки можно срезать,надо диод выкрошить и капнуть каплю олова,а тут как то не надежно
o şekilde yaparsan diğer ledlere daha fazla yük biniyor ve bir sonraki led yanıyor,bunlar seri bağlama ve ucuz bunların paralel bağlamaları var 250 tl civarı onlara bir şey olmuyor,birde orada gaiba 10 ohm luk bir direnç var onu 15 ohm yaparsan yine yanmıyor,yada ışığı yakan anahtarı akım korumalı yapacaksın ben evdekilerin hepsini çevirdim bir sorun çıkmıyor anahtara biraz tereddütlü bastılğın zaman led patlıyor.
It is better to use aluminum adhesive tape, which is available in the market.
Bravo sono di Ercolano Napoli
Ola, eu tento reparar uma lâmpada (marca "BRITEX" LED BR-QP-19-PP-75W)
(75W 110-265V 50/60HZ)
Na minha casa só utilizamos lâmpadas deste tipo
OBS: quando elas são apadas constantemente (e também pelo tempo de uso) elas ficam meio fracas (sem "potência" ou meio desfocadas)
➡ A questão é: será que tem como fazer elas acenderem forte)
Cool!
thank you
Ok good👍👍
ขอบคุณมากๆเลยครับ
???????????????
Если это так то огромное спасибо вам вы лучший
Saludo desde Colombia. Probado, comprobado funciona perfectamente. Gracias
Не долго будет работать .
Faltó que mostrara como queda adherido el grafito al foco.
Danke 👍🏼👍🏼👍🏼👍🏼👍🏼🤝
Все эти хитрости мы уже знаем, лайк все равно ставлю. Оренбург
Cool, thank's!
From Ukraine)))
👍 Ukraine! USA is with you.
@@jheydens Ukraina💙💛
Süper... Tekirdağ,, Türkiye... Turkısh..
It's easier to take some tin and a soldering iron and just solder.
Superb
thank you very much, glad you like it
Dobry pomysł, dzięki, Wielkie,,,,
Ерунда всё это.Только пайка этого места.
Интересная информация.
Привет из Узбекистана.
Доброго вечора ! Красиві ваші квіти,дякую мені понравились.
Très bon truc bravo, je suis pas top pour les petites soudures. Philippe Centre France.👍
Pencil lead does conduct electricity, but does it not burn? Solder feels safer.
鉛筆の芯は確か電気を通すが燃えませんか?半田の方が安心感がある。
いやいや燃え尽きない
Мы из России привет вам
Luar biasa
Asslamo alikum sir nice
Aslam O Alikum, Thank you friend! Glad you liked it
Wow
พิรู้ว่าหลอดไหนขาด ใช้ตะกั่วบัดกรีเชื่อมน่าจะง่ายกว่าครับ
Углерод имеет приличное солротивление, поэтому нагрузка особо не изменится.
Ya lo hice y dura encendida solo unos minutos
Не всегда дело в перегоревшей светодиоде...почерпнуто из практики...
❤ok
Oh my God
Проще паяльником перемычку сделать
даже не перемычку а оловом капнуть и будет норм
I removed a circular led panel from a stander led plastics lightbulbs now im left with the panel and the 2 small cables what type of compent dose it take to light one with a battery I need to know since I know got myself what’s inside of a lightbulb it doesn’t go at the house .. correct so I need a power source. 🇩🇴🇺🇸 Hii comment on this please
Mẹo sửa bóng đèn thật sự là hữu ích xin cảm ơn đã chia sẻ
В проектных институтах этот грифель а точнее графит вениками выметали....
Glory to God alone!
Manufacturers have put a lot of effort into making the light bulb burn out as soon as possible after the warranty expires.
They use heat insulators instead of heat conductors both in the base and in the protective cap.
Such repairs will not prolong work for a long time.
Cách này đơn giản nhất và bền nhất khi so sánh với các cách khác mà tôi đã xem
Bonjour c'est magnifique je m'appelle MWAMBA KABANZA GABRIEL Lubumbashi RD Congo.
BONJOUR ! contente de vous voir sur ma chaîne et bonne humeur à vous 🤗
Owh gitu caranya
У меня почему-то после пробника вспышка и моментально перегорает другой светодиод.Видно не для всех моделей ламп это подходит??? А
Valeu
Sim! valeu a pena
Может, лучше резистор впаять? Какой нужен?
Доброго ранку. Ваша ідея супер. Дякую та бажаю вам успіхів.
спасибі велике тобі !
😮
Ha a LED izzó , akkor a lóizé furulya !!!
Just like it shows in this video but no plug in source
😊😊😊
ไฟจะไหม้บ้านเอา
То как
It wouldn't last long, you'll putting higher voltage on the remaining led lights.
You definitely got that right because bypassing the burned out LED will increase the voltage to the rest of them and shorten the life of them
You need to salvage another LED from another bulb that's not working to replace it with , Or take an ohmmeter and measure the resistance of an led you salvaged and replace it with a resistor , you want to use a resistor or an LED from another bulb , Whichever is easier to install , Because the LEDs are wired in series just the same way as conventional Christmas lights as they are wired in series and when one bulb burns out , Even though the rest remain lit will increase the voltage to the remaining bulbs , The more bulbs that burn out , The more the voltage will be increased to the remaining bulbs , Unless you can use another LED from another bulb or use a resistor ,
It's not worth trying to fix an LED bulb as direct bypassing the bad one will shorten the life of the remaining LEDs
😮😊vgvgg😮 1:07 , +++-*.
Exactly right , we used to do this on the old Christmas lights, to keep them going over the festive season, a bit of tin foil , short time fix
No dura ni 10 minutos, se funde otra vez
Напряжение не при чем, здесь стоит стабилизатор тока (драйвер). Закоротив один диод, ток останется прежнем и увеличит нагрузку на остальные рабочие диоды. Сколько проработает такая лампа, это как повезет. Может быстро сгореть, а может проработать довольно долго.
Это временно я тож так и хана
for 1 to 3 days !на 1-3 дня !
Pomysł dobry ale myślę, że nie podziała długo na sproszkowanym graficie.
Będzie działać przez długi czas!
Вьі работаете фокусником в цирке?
Двмбіт бамбас!
Пробник ничего .Смотрим ..
Nohay sonido
Зачем морочить голову людям?
My wife always fixes these lamps. I dunno how she does it.
ty jesteś mądry ale inaczej
Это всё херня не долго будет гореть.😂
Україна місто Герой Ірпінь! Добрий лайфхак на невеликий час!
На 2а дня .перегорит др.диод.полная шляпа
Traduire francais
OK ! no komment !
Вранье с карандашем
Батаник
Уважаемый пургу гонишь это всё ненадолго.Никогда не погаснет 😃👎
Zona bedzie zadowolona... Jak ja porzadnie wygrzmocisz baranie!
What the f**k. just use soldering iron.
Ridiculous and dangerous.