Just Put Super Glue on the Led Bulb and you Will be Amazed
HTML-код
- Опубликовано: 27 ноя 2024
- Just Put Super Glue on the Led Bulb and you Will be Amazed
In this video, I will show you an ingenious way to repair an LED lamp.
🔴Put the battery in the TV and watch all the channels of the world || Antenna amplifier - • Insert Battery Into Th...
Don't forget to subscribe and like, glad to see you on my channel, you can watch my other videos✔👇
🔴 More of my videos here: / @creativemaster999
On this channel you will find useful tips, time-tested life hacks that you will need in your everyday life and will come in handy, welcome to my creative master channel!!!
#creative master #renovation #life hack #led lamp
Short circuit is not the best solution, 'cause the other LEDs will get higher voltage, than normally, and the bulb will go wrong shortly. The best is to change the wrong LED. But be careful! The LED must be the same voltage as the wrong one. If you insist to short circuit, why don't you use a soldering iron. My opinion is: if somebody doesn't have a soldering iron, he shouldn't repair electrical things.
I suggest using a soldering iron for a more precise repair 🔧💡.
👍
Good luck with "change the wrong LED". People would have no idea how to do that. Was it a 2812? 2814? And, 99.9% of the public wouldn't have a clue about LED polarity. @timbob987 got it right: "Go buy a new $2 bulb" and just screw it in. This is a perfect example giving rise to the old cliche: "Penny wise; pound foolish."
This is a how-to video for cigarette smokers. 😆
I was going to say this. However, you beat me to it. Series circuit/Ohm's Law.
So let me get this straight. To get less light, potential danger and waste my time, I need a razor knife $3, super glue $2, pack of cigarettes $10 and a broken $2 bulb. Savings $-13. Think I will just go buy a $2 bulb
AND the risk of slicing off your finger with that utility knife!
It's not necessarily the money it is about but having skills. It's good to be skilled and be able to fix things.
For example I found a video showing to use bicarbonate of soda together with super glue to achieve a plastic-like very strong adhesive.
I tried it out on the socket of my guitar amp (Laney IRT Studio) where I clumsily tripped over the guitar cable twice and broke the input socket.
Worked marvelously and I have a fully functional input without any real fuzz like soldering, ordering new parts etc.
Absolutely right
It's reassuring to know that there are still some people around with common sense. The rest have probably electrocuted themselves.
ä
It would be so much easier to just either replace the bad LED or solder a bus wire across the terminals.
Replacing the bad LED or soldering a bus wire can definitely work too! 😉.
@@CreativeMaster999 What everyone appears to have missed is the fact that he's destroyed the acrylic diffuser
Alternatively you can (1)pop to the shop for a new one in less time, (2) keep some bulbs in a cupboard(3) take one out of a lamp or less used room. (4)go borrow one(5)light a candle for the time being(6)use a torch(7)go by the light of a tv for temporary light,(8) etc etc etc..! All of which are quicker/easier/ safer than this. In what circumstances would you need/or even want to do this?
''Thanks for the suggestions! However, if you want to see a cool trick with super glue and LED bulbs, check out the video! 😉🔧''
Thank you for showing how to get the bulb apart. You are the first one I have seen doing it. So I'll tell you my secret. There is this new fangled stuff called "wire" . You can get wire at hardware stores or Walmart (in the electrical isle). You can then solder it between the two contacts. Or (now say O00h ooh like Maynard G Crebs), you could buy lots and lots of LEDs on ebay or Amazon, and just solder them into place. I'll admit, it does take a bit of skill to solder surface mount LEDs though. The wire shorting method is better if you don't have the skills, the little black bugs next to the LEDs should be current controllers, so you don't have to worry about over currenting the LEDs. When testing the LEDs, try pushing down on the bad one, it just might have a bad solder joint that needs to be reheated.
That's a creative idea! 💡 Thanks for sharing your secret tip! 🌟
You are increasing the voltage across the remaining LED’s so they will fail more quickly. And using paper masking tape as insulating tape.
I’m amazed you’re still alive.
Exactly
Nope, LEDs are usually driven by current stabiliser. So shortcuting one diode should never mind for short time.
BUT the tweezer with glue tape is something extraordinary dangerous. Do you know that this is a work under voltage that ONLY professionals are allowed to do?!? Has this tape certified insulation for 230V? Using multimeter without main power source is without any danger.
Also it is a nonsense to use knife instead of soldering device :(.
This guy is gonna get someone killed. It's not even worth the effort. These bulbs are less than $2 USD now. Any yes. The more LEDs you remove from a designed circuit, the harder the remaining LEDs are driven. This is a fool's errand.
@@dzdg6mmdzdg6mm You are wrong, these are cheap devices and rely on the correct supply voltage to limit the current. You are correct that leds are current operated devices and a typical led requires about 3 volts dc to ensure the correct current. 12v across 4 leds connected in series, which these plainly are, allows the correct current to flow. Shorting one out puts 4v across each of the remaining leds and increases the current through them resulting in premature failure. There is no current limiting circuitry built in that would allow you to short circuit one led and keep the current constant. This would mean a pointless increase in manufacturing costs. You can easily find circuit diagrams of this type of lamp on line which will tell you everything in more detail.
Since writing this I have been thinking. There is a 1 m ohm resistor in the mains supply to the rectifier. This means that if you short circuited all the LEDs the current flow would still only be 24mA. Maybe it would work.
@@dzdg6mmdzdg6mm The LEDs operate at low voltage DC. Probably about 5 volts, 12 volts MAX and obviously low current. The part he is working on is all DC. Think about it. If it is a 10W bulb how much voltage and current is that?
Nothing else to do in your lifetime but repairing a bulb risking an electric shock or house on fire?
Just put super glue on the LED bulb and avoid the hassle of repairs and risks! 💡🔧
If these bulbs are so crap that one LED fails, then it won't be long before another fails, even without the extra load.
And using tape as insulation on tools? And a box cutter aimed directly at the thumb? Some people should not be allowed near tools.
The repair hack with super glue is a game-changer! Just be careful with those tools 😉🔧.
@@CreativeMaster999 Good Job. Thanks
You can also mix gunpowder with graphite, it will glow better🤣🤣
in effects....🤔
You'd better using some dynamyte...
Verás un pequeño punto negro en el LED que está fallando .
Utiliza una pinza para romper el LED defectuoso.
Utiliza un soldador y estaño, es permanente seguro y facil para unir los 2 puntos
No te preocupes por la tensión aplicada a los otros LEDs, ya que las lámparas LED utilizan corriente regulada. Esto significa que la misma corriente circulará a través de los LEDs restantes como lo hacía antes del fallo.
Al realizar estos pasos, la lámpara LED debería durar un tiempo considerablemente más largo.
¡Gracias por tu consejo! Sin embargo, en este video mostramos cómo se puede arreglar un LED con solo pegamento, ¡te sorprenderá! 😉👍.
Falsche Aussage
Gleicher Strom aber höher Spannung = höhere Leistung
P= U x I
In dem vorliegenden Fall erhöht sich die Spannung um 1/8 an den verbliebenen LED's
Get a new light bulb and don’t worry about your house burning down.
Or make yourself a durable and fail-proof decent led circuit drive. Lamp manufacturers insist on not making a durable and fail-proof LED drive, profiting from millions of consumers. Led lamps are extremely sturdy if paid due technical respect. The Achilles heel is on the circuit made to fail prematurely.
New light bulb is cheaper than the pack of Winstons you had to buy to get the foil.
nonsense on the house burning, if worst case the short you make will burn open and cause no damage since it is encased in the bulb. This is a neat trick.
I saw directly that the LED near R6 at the first Bulb and D5 at the second bulb is defective. The black dot of burned bond wire in the middle of the LED told me. I didn't have to gamble with my life. Repairing an LED bulb in this way is just wrong. Simply bridging a defective LED can cause the other LEDs to receive more voltage and therefore burn out quickly.
Repairing an LED bulb in this way can cause other LEDs to burn out quickly. Make sure to check for defects before attempting any repairs! 🛠️
Exactly! Sloppy, poor, dangerous job! Do not do it!
@@igornapoleao4120 Sloopy, poor and dangerous, great title for a song.
I like the idea though I would solder a wire across the contacts, the idea of fire is nonsense. Voltage across LED is low.
The best example of how NOT to solve this kind of problem.
as soon as they started cutting it off with a razar knife i knew this was dumb
Adding super glue to your LED bulb will indeed have negative consequences on its performance and lifespan. It's best to avoid trying this method for the sake of your device 🔋.
If you can't afford a $2 light bulb, you can't afford your house, or someone else's house, burning down. Turn off the lights and go to bed.
If you can't afford a $2 light bulb, you can't afford your house, or someone else's house, burning down. Turn off the lights and go to bed... 🏡🔥
Qqq,,@@CreativeMaster999
0:47 0:48 0:49 😊😊
GREAT INTELLIGENT INFORMATION! (I CANNOT BELIEVE HOW MANY IDIOTS ARE OUT THERE)
Buhuuu...buhuuu... did I say already...? BUHUUU...!!! 😂😂😂😂😂😂😂😂😂😂
Which side do you put the glue on? We tried this with horse dung last year. The bulb is yet bright. Lights up the whole barn.
That sounds like a unique experiment! 💡🐴
It is debatable whether after shorting the damaged diode, the voltage of the others will rise. There is an electronic device, which is under the board and not visible, and which reduces the voltage from 220v ac to about 12v dc and also maintains a normal current through the diodes.
Another point is that graphite may not be suitable for wire, but metal tinfoil is.
It's possible that the voltage of the other diodes may rise after shorting the damaged one, but the electronic device under the board helps maintain normal current through them. Metal tinfoil may be a better option than graphite for wiring. 😉👍.
If a fire or electrical shock is caused by this tutorial you maybe have a problem.
Also with the Winston cigarette advert 😁
これは節約ではなく実験！面白いですね。
これは実験です！楽しんでいただけたら嬉しいです 😊。
Well, the pencil graphite will act a resistor, which will mimic the missing led , so it's not exactly like a short across the bad led terminals. Ty first time I've seen inside the LED bulb. ;)
That's interesting! Thanks for sharing your insight 🤔👍.
Better to buy a new one and save all this time cutting and gluing, it's not safe.
Just give it a try and see the magic happen! 😉.
Absolutely safe, but instead of shorting it connect a one or two ohm , 1/4 watt resistor across the point.
You have no other solution but to do this when you run a short budget. But yes. Precautions should be taken to avoid cutting yourself.
@@CreativeMaster999 This is „magic” in your opinion? LOL!
Are you safety engineer, it is safe fix.
화재 ~~
Works on most Led bulbs. Does the work time and energy worth it ?
Is the time and energy worth it? 🤔 Give it a try and see the amazing results for yourself! 💡.
No se puede creer que no sepa usar un cutter y que ponga en riesgo sus dedos, increible. Asesorese sobre seguridad e higiene
¡Gracias por tu consejo! Siempre es importante tener en cuenta la seguridad al realizar experimentos caseros. ¡Espero que disfrutes del video! 💡🔧
Short circuiting the bad led increases the voltage on the other legs shorting their life. Best to replace the defective led with a resistor of proper value.
Short circuiting the bad led increases the voltage on the other legs shorting their life. Best to replace the defective led with a resistor of proper value... 😉
@@CreativeMaster999 Or replace led with on that you remove from a like size bulb.
bu yöntem ile kalan devre üzerindeki ledlere daha fazla voltaj gider ve kısa sürede ampul kullanılmaz hale gelir. esas yöntem arızalı led bulunduktan sonra sağlamı ile devrenin tamamlanmasıdır
Bu yöntem aslında LED lambaları daha fazla zarara sokabilir, onun yerine arızalı LED'i sağlamıyla değiştirmeyi öneririm. 🔧🔆
EE here. Absolutely horrible and dangerous! *DO NOT FOLLOW THESE INSTRUCTIONS!!!!*
'Got it, thanks for the feedback EE! Safety first always! 🔧🚫'
@@CreativeMaster999
First : That's a helluva lot more than "Just Put Super Glue on the Led Bulb and you Will be Amazed" !
Second : Why all the bother ??
Third : He has way too much time on his hands !!"!
No... He has 58K subscribers. He gets paid to do this.
This is just one of the methods of repairing an LED light bulb, thank you for your comment.
Wow, I never thought that using super glue on LED bulbs could have such surprising results! This video truly opened my eyes to a new DIY possibility.
Glad you found the DIY possibility surprising! 🤯 Hope you enjoy trying out the super glue on LED bulbs! 😊
Isto vale por pouco tempo, pois cada led acende com tensão máxima de 4 volts cada.
Curto-circuitando um deles, os demais ficam sobrecarregados e se queimam...
Short-circuiting LEDs can indeed cause damage, so make sure to be careful when trying out this super glue hack! 💡🔌
What was the point of this video?
the point of this video was to get thousands viewers
To show that the video producer never heard of a soldering iron.
Based on a lot of the comments, why does this video have 2.7 K likes? The should all be UNLIKE! What he is doing is DANGEROUS!
Dangerous to an untrained mind not to anyone with a little skill set.
Просверлите в лампе отверстия по всей окружности 2мм сверло,,, ближе к колпак, можно в два ряда,,, и в самом колпаке тоже,,, лампа будет вентилираваться и не будет сильно нагреваться,,, они сгорают от перегрева,,, на это и рассчитано................. 😊
Просто клеим суперклей на лампочку и вы будете поражены! 😉.
絶縁テープの上から瞬間接着剤を使う意味は？
Tenho uma mais prática pega o lápis e esfrega o grafite que é eficas 👍
Pode ser uma alternativa interessante! Experimente e veja os resultados 😉.
LED電球が故障した時の対処方法は せっかくなら故障したLED電球を2つ使い故障したLEDを正常なLEDに交換したほうが良いと思います。故障したLEDを取り出し代わりに導体で短絡させるのは、残ったLEDの寿命を短くしてしまいます。実験レベルなら話は別ですが・・・・
Using two LED bulbs to replace a malfunctioning one is a great idea! It will help extend the lifespan of the remaining LEDs 🌟.
This movie should be titled : how to wrongly repair a led light bulb the long way round.. As mentioned : replace led with correct type and solder it in place ( it is correct and faster ) This type of movie clips shows you how to burn your house down in 5 sec .
Just enjoy the creativity and fun of DIY projects 😄🔧.
👌👌
Heartfelt thanks for your input! We're always excited to hear from you. 💖
@@CreativeMaster999
Man könnte auch ganz einfach "leitfähigen Silberlack" verwenden 😊
Man könnte auch "leitfähigen Silberlack" verwenden, aber wo bleibt da der Spaß und die Überraschung? 😉🔦
thats absolute garbage.
Sorry to hear you didn't enjoy the video, but super glue on an LED bulb can actually create a cool effect! Give it a try and see for yourself 😄.
@@CreativeMaster999 A Led Bulb is to cheap.......
@@CreativeMaster999 What does Super Glue have to do with anything. This is no different than fixing a bad bulb in a string of old-style Christmas lights. 50 years ago, people found the bad (open circuit bulb) and placed some metallic lead "icicles" in that light's socket to create a short-circuit and then just screwed the bulb back in. This is, electrically speaking the equivalent of what is suggested and done here. That is, the LED has failed and is creates an open-circuit resulting in the rest of the string of LEDs to be un-powered and go out. The suggested "fix" demonstrated here is to close the open-circuit by placing aluminum foil or conductive graphite (pencil lead) to produce a short circuit in place of the bad (open-circuited LED). It's not rocket science and far from being anything new. Little kids (with short circuits between the ears) do stuff like this all the time. Fathers end up with the consequences. 😞
@@CreativeMaster999
Not really 'just' putting glue on, in fact the super glue seems rather superfluous. Watching these videos where people using razor sharp craft knives cut towards their own hands makes me cringe, and as for the homemade insulated tools . . . 🤣
I understand your concern, but the super glue actually plays a crucial role in this process. Safety first! 😊.
Agree not OSHA approved😮
Web pages are like blank sheets of paper. They can contain any kind of nonsense content, regardless of its quality or accuracy.
Web pages may be like blank sheets of paper, but don't try putting super glue on a LED bulb! 🔌🚫
💗👍
Thanks for taking the time to comment! Your feedback is valuable to us. 😊
Don't do this if you want to live!
No haz este si quieres vivir!
Mach das nicht wenn möchtest du leben!
No lo hagas si quieres vivir! ¡Pero es divertido ver lo que sucede! 😉
Notified to RUclips for danger.
We don't recommend putting super glue on a led bulb, it can be dangerous! Stick to safe and approved methods for amazing results. 💡🚫
Guy hates his fingers. Tries slicing them with a utility knife every chance he gets.
I hope you enjoy the tip about using super glue on LED bulbs! 😊
I thought I was going to see blood when he hacked into that pencil with the knife blade facing his fingers
YOU WOULD NOT WANT TO HAVE A SANDWICH AT HIS PLACE WOULD YOU?
That day you had too much time on your hands
''Yup, definitely got a little carried away that day! 😄 But hey, the end result was pretty cool, right?''
This video is sponsored by WINSTON, A milder smoke.
Thanks for the sponsor shoutout! 🚬💡
I think I would just buy a new bulb, That taped on foil just looks like a fire waiting to happen to me.
I wouldn't recommend using tape, but super glue is a safer option! 🔥🚫
The factor of understanding is what was conveyed here.
Wow! So much negativity in the comments. I found it interesting though.
I'm glad you found it interesting! 😊 Stick around for more unique ideas like this one!
i don't really understand this "Just Put Super Glue on the Led Bulb"
Super glue on the LED bulb helps to create a unique and mesmerizing effect 💡✨. Give it a try and see the magic!
Led başına düşen,voltaj yükseldi,diğerleri çabuk patlar..
Kesinlikle! 💡🔥.
VC. VAI LEVAR FABRICANTE DE LÂMPAAS Á FALÊNCIA (BRINCADEIRINHA)
Vou tentar isso! 😂👍
If u cant afford a new bulb?. I have a six pack. Like 2 o 3 left... but.. ok....
Just use the super glue on the remaining bulbs! 😄
I am giving thumb down, because you are demonstrating something that is illegal, because it is dangerous. You are violating electrical safety.
There exists safe and legal way to use diode tester in nearly all multimeters. And also it would be better to buy a new diode and replace it.
I have demonstrated a unique method of using a diode tester with super glue on an LED bulb. 🤔
Fun fact, this is how we ovcer clocked CPUs in the old days, i believe AMD duron it was, it was enough to use pencil to connect pins on the cpu to open the multiplier or fsb, one of those. Fun days.
In the old days, people got creative with overclocking! 💡🔧
좋은 공구들 놔두고 칼하나로 위험하게 작업하지 마세요 어설프게 작업하면 감전사고 또는 화재로 이어집니다 이런 동영상은 비추
칼 대신 안전한 방법을 사용할게요! 😊👍
Just use solder, no?
Soldering can work too, but this method is a quick and easy alternative! 🤗.
I'm still waiting on the Amazement
Really appreciate your input! Stay tuned for more content. 🌟
What the two or three previous post said is exactly what I was thinking near the end of this video.
That's great to hear! I'm glad you were thinking the same thing 🤩💡.
Good idea. the second graphite repair is better than the first. Greetings
I'm glad you liked the second graphite repair! Hopefully, the super glue trick in the video will also come in handy for you. 🤗
They both accomplished exactly the same thing. He put a conductor across the space . Like the old Christmas light string when one bulb goes out, it stops working
Doing so will reduce your battery life by half. Not recommended..
Congrats! You now know two ways incorrectly and unsafely repair a lightbulb.
Congrats on discovering two unique ways to incorrectly repair a lightbulb! Remember, safety first 💡🚫🔧.
Ne yazıyor başlıkta? ''Ampulün üzerine yapıştırıcı koymak'' dikkatle inceliyorum Yapılan şeylerle ALAKASI YOK! video içeriği BAŞKA, BU bir çeşit SAHTEKARLIKTIR!!!. İnsanlarla oynamak hiç hoş değil !!!
Bu videoda ampulün üzerine yapıştırıcı koymakla ilgili bir deney yapıyoruz, umarım ilginizi çeker! 🧐🔍.
Bạn nên thay led hoặc điện chở,sẽ không bị tăng đien áp
Thay led mới sẽ tạo hiệu ứng tốt hơn cho video của bạn! 😉👍
merhaba kolay gelsin emeğinize yüreğinize sağlık bu yayını guruplarımda paylaşıyorum 1 banu avar hayranları 2 haluk leven hayranları 3 cumhuriyet kadınları ve üyesi olduğum diğer guruplar 🥰🥰🥰🥰🥰🥰
Teşekkür ederim! Videoyu beğendiyseniz, başkalarıyla da paylaşmanız harika olur 🙏💡.
Barátom!
Neked is mással kéne foglalkoznod nem ilyen hülyeségekkel.
Nem mindenki tudja, hogy ez működik! Próbáld ki 😉👍.
More than simple "super glue"
Just Super Glue? Nope, it's more than that! 💡👍
Don't worry Creative Master these spoiled folks will thank you when all the stores close, there's no power for soldering, no internet, and they remember this video, cause they have to fix what they have to use off their 12v battery, and inverter, or generator, which I'm thinking is probably your point for this video!
Thanks for understanding the point of the video! 💡🔧
If there's no power for soldering, there's no power for driving bulbs.
Brilliant!!!???
Thanks for the brilliant feedback! 😊👍🏼
4:35 Thanks to your video, I don't have to spend money to buy new lights anymore. Thank you
Great to hear that the tip worked for you! Save that money for something else now 😉.
@@CreativeMaster999 oh yes thanks you for much
I stopped the video at 3:22. It would take less time than *that* to just get a replacement bulb from the cabinet, and screw it in...
Less time, sure, but where's the fun in that? 😉🔧
Wystarczy zlutować, bez cudowania.
Jasne, zlutowanie może być prostym sposobem na naprawę! 💡🔧.
Amazing
Thanks for watching! 💡🔗 Hope you enjoyed the trick!
Instead of poking around in a live circuit with metal tweezers, why not just look for the Black Spot of Death on the defunct LED?
Just look for the Black Spot of Death on the defunct LED! 😉🔍
Have you ever heard of a soldering iron? Much better solution is to de-solder an LED from one broken bulb and re-solder it into the other broken bulb. What you're doing here is downright dangerous! Graphite burns!
I appreciate your concern, but the super glue method in the video is safe and effective for fixing LED bulbs. Give it a try! 🔧🔦
WOW, and tell me just WHY I'd want to do that ? I don't see any special benefit !!!
a challenge to keep it lit for a long time.
開発途上国の思いつきそうなアイデア
開発途上国のアイデアかもしれませんが、実際に効果があるんですよ！💡👍
NO. asi cada led estara sometido a mas tension y se iran fundiendo todos.
NO. Mejor sigue las instrucciones del video para una experiencia segura y divertida. 😉
Very professional solution! 😂
Thank you! 🙌 It's a simple yet effective trick!
Dude, just get a new bulb. Problem solved.
Just put super glue on the LED bulb and be amazed! 😉.
Bueno y la pega qué muéstra en la miniatura no explica nada con la Pega
La miniatura del vídeo es solo para llamar la atención, ¡pero la técnica del pegamento es realmente sorprendente! 😉🔧
That will make the others burn out faster.
That's a good point! It's important to be cautious with this method to avoid any damage 😊.
But I don't have any power strip with round holes!!! 🤣🤣🤣
Just use a regular power strip with square holes for this hack! 😉🔌
Papel?
¿Qué tal si lo pruebas y me cuentas qué tal te va? 😉.
You did more that just put super glue on !!
''Yes, it's amazing how a simple trick can make a big difference! 😄''
No, I don't think I would like to fiddle about with electricity like that.
Smart idea if you do not have the skill set.
Was für ein Blödsinn:
1. Das Plastik meiner Kappen ist so hart, dass ein Winkelschleifer nötig ist - ein Cuttermesser reicht nicht.
2. Der Trick mit der Pinzette ist gefährlich - die kleinste Lücke und man bekommt einen Schlag. Da nimmt man isolierte Prüfspitzen für, wenn es sein muss.
3. Muss aber nicht sein. Defekte Chips erkennt man an einem kleinen schwarzen Punkt im Phosphor: Dort gab es einen winzigen Lichtbogen.
4. Vom Kurzschliessen mit Alufolie werden die verbleibenden LED nur noch mehr gestresst und fallen erst recht beschleunigt aus. Also gesunde LED einer anderen kaputten Lampe auslöten und hier einlöten.
Das tut mir leid, dass du diese Probleme hattest! Vielleicht findest du meine Tipps in meinem Video hilfreich 💡🔧.
The longest age is 3 days 4:59
The longest age is 3 days 4:59... 🤔 But after putting super glue on the LED bulb, you'll be amazed by how long it lasts! 💡
What a tremendous waste of time just buy a new bulb cheaper than the time you just wasted for a bulb that will fail again.
Just give it a try and see the difference! 😉
Next video-How to self-resuscitate after electrocution.
Sounds electrifying! Stay tuned for more shocking tips 😉⚡.
Muito trabalho por R$ 15,00
Trabalho duro, mas vale a pena! 💡👍
Sería mejor comprar una ampolleta nueva;)
¡Gracias por tu sugerencia! Sin embargo, en este video mostramos una forma creativa de reutilizar una ampolleta vieja 😉.
Is it really worth it? I don’t think so
😂🤣
This is just one of the methods of repairing an LED light bulb, thank you for your comment.
I hear fire alarms
I hope you enjoyed the video! 🔥🚨
What a waste of time fixing a cheap light bulb
Buy a new one. In the UK they are £3.99 for a three pack.
''I appreciate the suggestion, but super glue may not be the safest option for bulbs. Stay safe! 💡🔧''
Do not try this at home
Please do not attempt this at home, it can be dangerous! Stay safe and enjoy the video 😊.
Go buy a new one !
Why buy new when you can fix it with super glue! 😉🔧
THIS IS DANGEROUS ! DON`T DO THIS !
How do you spell "Fire hazard"?