Great video! this was very helpful, I have 3080GPU getting pretty decent performance, only issue is when closer to the ground I get kind of a wobble effect on the ground textures, any idea of what setting to tweak? thanks!
@@juankaramirez It might be that Oculus is forcing you to use Asynchronous Space warp, I'd recommend manually turning this off in either the debug tool or tray tool everytime you are in VR in the sim.
Mate you are an absolute legend for making these videos. Must have saved tens of thousands of man-hours of your viewers tweaking settings by now. Appreciate it a lot
Been subscribed to the channel for a while and tried a few setting but I was still finding looking outside from the cockpit a bit, well a bit wavey, the high spec setting on this tutorial have totally transformed the experience, so smooth in a flight just now over a cloudy London and the instruments are crystal clear! Quest 2 running on a 3090 with 32mb RAM and i9 7900 with MSFS now running on its own M.2...Thank You!
Thx for this video, I got great results with your settings, I thought that with the openXR toolkit the OTT was obsolete, but with both running on your recommended settings I got a much clearer picture with framerates around 40.
This is what I've been looking for! I'm new to VR and DCS so I'm going to give these a shot. I didn't realize the OpenXR worked with Oculus. I have similar specs (i7 10700k, RTX 3090, 64gb RAM) and I've been trying to optimize my settings with the 3090. Thanks so much!
@@VRFlightSimGuy I can stay locked at 80fps in DCS with these settings. I'm not using OpenXR Toolkit. Should I? Also, do you like setting OTT SS to 1.2 and turning off ASW? Seems to have worked good for my 3090.
Steve (and Mark!), thank you so much for this update. I have my 2080Ti card with a Quest 2 so I'll be circling back this weekend to compare my settings with yours, to see if I can get any improvements. As always, keep up the great work! It's hard to keep up with these constant updates and changes. ;)
Thank you for putting this together! Does it matter how the Quest 2 enters VR in the game? I’ve tried just running the game on my desktop then doing alt-tab to enter VR, I’ve also launched the game through AirLink/VirtualDesktop and then entered VR in the MSFS menus. Right now I’m testing slightly decreased graphics settings values in-game (since you’re running a 3090), but I still haven’t been able to get the frame rate smooth, still lots of jitters unless I move my head very slowly. I’m running a similarly powered CPU to yours and a 3070, I feel like there’s got to be some combination of settings that would allow this rig to run it decently!
thanks for sharing, this is fantastic. would you mind detailing your startup steps? from powering on the PC, to starting OTT, OpenXR, oculus software, MSFS, etc.? have you automated the startup process at all with a batch script?
My pleasure. For the Quest 2, it's much easier, I turn on my headset, connect to airlink, run the sim, I do not jump into VR until my flight has loaded, then make sure my tray tool us using asynchronous spacewarp or, turn it off (that last step is important). Cheers.
@@VRFlightSimGuy I know this is an old comment but can you elaborate on the ASW part? You make sure ASW is on in the tray tool or turn it off? I'm having a hard time understanding that bit.
Thanks for this great video!! Big improvement! Just started to follow your page! I’m using Oculus Mirror + OBS to stream in fb or recording. I’m having stuttering issues every time I start using mouse to navigate or click instruments inside cockpit. The only way I get it to work is hitting the “window” button in my keyboard and clicking outside the msfs window, but as soon that I click back to msfs, mirror starts to stuttering. I’ve searched everywhere but with no success. The stuttering is just in the oculus mirror because while flying everything is smooth inside the VR. I have Q2 using a i-9 with a 3090.
Hi I must be doing something wrong! Brand New Pc 3080rtx, i7 12700kf. 32Gig Ram Getting confused with openxr/ Runtime? Really don't understand this despite loads of googling In the oculus app it says "Oculus is set as the active Openxr runtime." Is this correct? Developer settings in Openxr toolkit say Motion Reprojection Disabled In OpenXR developer Tools it says "The windows Mixed Reality OpenXR Runtime is installed but is not the active OpenXR runtime" Again is this correct? Now in the oculus app if I have Rendering Resolution at 1x in 80 or 90- Hz everything runs really smooth although I would not say they graphics are "great" bit shimmery/pixilated, but in msfs a lot of settings are on Ultra . If I take it over 1x in the oculus app start getting jerky stutters out of the side windows, but it does look better. However I prefer smoothness I have to run the oculus debug tool Toggle windows visibility. Tray tool also running 1.3 ss, ASW off FOV 0.7 x0.7 Where am I going wrong with upping the render resolution in the oculus app causing stutters? I am happy with the smoothness just want to improve the look, and really really confused with all this openxr stuff is this right that oculus controls this as above? I tried the OpenXR toolkit, but could not manage to change any settings in that, the menu would only stay on screen for about 8 seconds and then disappear. Your videos are great but a really simple guide for old ones like me would be fantastic. Ie setting up from scratch. I seem to spend 90% of time changing settings and not enjoying it. Using Link Cable Thanks very much for any help you can give
Thank you for the video. I am running a 4090 with the Quest 2 with the suggested settings, but I am still getting some rather blurry results; so much so that I am unable to read the buttons next to the GPS etc. Is this just a limitation of the headset or do you, or anyone else for that matter, have an awesome suggestion at hand?
awesome video thanks for sharing!!! can't wait to try these settings out this weekend. Any plan to make a similar video for Elite Dangerous? (ofc horizon not ods)
Even I never fly with my Quest2 is good to know some Q2 optimisation stuff. The next question in our Discord will come for sure🤣 Thank you and take care buddy 👍
Hi. Now you have 13900k and 4090 (same as me) what settings would you use for quest2 or pro. I have the pro, so im interested. Great videos mate. Wonderful.
I had a G2 and didn’t like the eye focus issues, it was buggy (working some days and not others). Even the headset is not as comfortable as the Q2 aftermarket Halos. Bought a Q2 and absolutely love it. Half the price of a G2 even with the Halo headset. And as I’m still running a 1080TI, I find I can up the graphics setting so my visuals are better. I’ve been running at 120htz as I’m only flying slow GA (C150/172) so MSFS can keep up. I assume however that flying jets like the Hawk requires MSFS to load graphics much faster and thus the need to lower the htz setting in your video? The biggest thing I found moving from a G2 to a Q2 is that not having to be tied to a computer, I now use VR far more than I ever did with the G2. I truely thought I only wanted to use VR for flight simming. How wrong I was. Everything from watching movies to playing Onward in my backyard where I move around physically rather than just moving the controller. And the headset is now available for others in the family. Simming is now just a small part of the VR world. The G2 is stuck to a boat anchor that limits the true VR experience.
Isn't it funny, I disagree with pretty much everything you've said regarding the G2/Quest 2 comparison but glad you are enjoying VR, that's all that matters. I do agree the Quest 2 is a fantastic all round VR headset though, I use mine daily for wireless gaming. Cheers.
Ok, everytime I try to change the settings with openxr while in vr, it just crashes msfs and I don't know what I'm doing wrong. I'm starting the game normally but just hitting vr mode
Hi great channel love it Can you help me I have the quest 2 but it's like looking through water As for distance it's like the world is moving horrible tried debug all the rest of the things you mentioned on your channel I have a 9 series cpu a 2080 super card and full of memory Yet the picture is just rubbish in the head set I brought two g1s both went bang flickering eye so decided not to buy anything from them again maybe I should have brought the g2 or something else Gutted help !
Love Your videos. Would you have an idea why I can’t see the open xr toolkit menu in my quest 2 googles? I can see the timer countdown to press CTRL f2 but when I do nothing happens?
Thanks for this setup, it's very smooth. Only thing I wish you'd caveat in these videos is that it's normal for it to stutter a little as you look out the window, easy to get used to but if you don't know, you end up playing with settings for hours just to realise it's just a Sim limitation
@@VRFlightSimGuy Thanks but I ask the application with gray interface you show at 5:20. if Open XR toolkit I dont know how the open this popup with FSR item.
Hey I downloaded OpenXR Toolkit beta 3 and ran it but I didn't have any of the fixed foveated rendering settings - do you know what is up with that? (edit: read the notes on the web page... apparently only Radeon 6000 series GPUs running DX12 get the feature)
I am strugling for weeks now to get a smooth experience in FS2020 with the Meta Quest 2. But the connection...There is something not good somehow. I have USB 3.0 but the Oculus app says i do not have 3.0. Flying is smooth but there is a constand jamming effect...Like the cable is a bit broken...wich is not. My system Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz 3.60 GHz - GeForce RTX 3060 Inno 3D 12GB. RAM 16GB
Hi, I have quest 2 with 3090 and with DLSS enabled I can't read anything in the cockpit and I got very good vision. upgrading to a better set like crystal and 4090 will improve the ability to see markings and texts in the cockpit ? Thanks
Hi VR Flight Sim Guy, not related to the settings, but how do you record your FS2020 VR session? I experimented with OBS by "cut" one eye only and then resizing the view, but the resolution is bad. Also, try with oculus mirror but my performance is degraded a lot (I9-12900K, 32Gb, gtx3060). Thanks in advance!
1:40 I could't agree more. I've recently upgraded from 2070 to 3080Ti... I wasn't expecting that better framerate would have such an impact on immersion. It's just undisputable if you ask me.
In your video from 3.12.2021 you had quite different settings even in Oculus Tray Tool for example ASW..I am not sure now what to use? I have nw Oculus 2 and using for now airlink.
just orderd my G2 V2 should come tomorow they say they going like hot cakes not many left in and they only had them come in today whats a good GPU CARD for the reverb g2 v2 is the 3080 good i think i can strech to that but the 3090 is a bit out my range for now
Where did you order the G2V2 please? They appear to be out of stock everywhere I’ve looked. I think I’ve had it with Varjo and will be sending it back so now it’s a decision between Pimax & HP. (I’m in the UK)
Hey magic, congratulations on scoring a G2, they're pretty hard to get hold of as you say! A 3080 will rock, if you can though, the ti version would be perfect as it performs the same as the 3090.
@@VRFlightSimGuy let me no if you can were i can get the cheapest 3080 ti to get the max out of the g2 v2 when i get it today am looking forward to play on the g2 v2 as you give it so much hype
@@VRFlightSimGuy cant get the msfs running every time i try to load any of the flights on the sim goes into it some times then other time it dont just crashes open xr tool is all side ways when you press on ctrl to get it up its not square in front of you can you help me out
Best VR flight in terms of quality & smoothness since I upgraded my RTX 3060 to a 3080 TI! I see no FR (frame rate) difference between 90% or 100% in the Open XR Toolkit, and have the middle/outer set to 1/4. 40 FPS around my local Melbourne AU landscape with Photogrammetry OFF as I continue to suffer from severe 'candle wax' scenery below 2,000ft 😞 Only other difference maybe I recently enabled RBAR (Resizable BAR), including using the Nvidia profiling tool to ensure flightsimulator.exe was using the potential memory enhancements. Eqpt: Quest 2, Intel 12900K, 32GB (3600Mhz) RAM, RTX 3080 TI, Motherboard Z690 UD AX DDR4 and an MVMe 1TB primary drive for OS/FS2020
What is exactly reason u replaced rtx 3060 with 3080ti? What brand 3080ti u have? Did u change because new card has higher processor and memory frequency?
@@Fullhouse0056y6 After months of tweaking i could not obtain the clarity or performance I was looking for on the 3060 and the 3080 was an affordable upgrade.
I have a 1080ti. Would you say its worth the bog investment to go to the 3080ti. Im noticing small stutters despite trying lots of different variables. It makes sucj a difference to the immersion
Hi, I’ve got the sim running smoothly in vr but I’ve got a lot of tree shimmering and at distance near the horizon things look almost black and white. Is the a fix for this?
That's affirmative, however you don't need the open XR toolkit running in the background. Just enabled it and access it through the in-sim menu whilst in VR.
how should I enable openxr and not oculus? when I set it as default runtime from openxr dev tool, msfs says no headset detected when trying to change to VR. Should I install WMR or what? i'm new to VR and i'm kinda lost
Hey my dude... so I've been working on settings for my system. The OpenXR thing is interesting, but it gives me maybe around 2fps (if that)... not seeing a big jump using it. Is this for steamVR? I run everything on oculus native software (if I can) Just curious about this program since I've never used it before.
after more experimenting, its not really giving me more frames, but does make it smoother... and the capture smoother.... so OpenXR seems to be good in that respect.
Hey Raven, yes the toolkit only works with Open XR, have you messed around with the fixed fov rendering? It's a pretty nice increase in performance together with the NIS scaler. The OTT is great though, especially as you can save your settings. The only thing I so notice is you have to keep resetting the ASW mode once in VR, otherwise it can be a bit of a stutter fest.
@@VRFlightSimGuy thank you for your answer,i think i have start use eGPU for my asus rog laptop because my laptop 1070ti is not enough for MSFS2020 VR mode.do you advice me good GPU card model for MSFS2020 VR mode_
I rarely recommend super sampling, it's hurts your GPU sooo much unless you have the headroom. ASW locked at 30hz is really great so long as you can reach that target. For you, that would equate to 27fps as the Rift also runs at 80hz. (If my maths is correct)
@@VRFlightSimGuy : OK, now what.... Really would like to find out why I can't get that GUI Popup to use the shader appearance cause default MSFS2020 in VR is lousy.... Been begging Asobo to work on VR, but it's not a priority
Well I can not get on with open xr tool it just looks horrible with my quest 2 looks a lot better with it not on with your setup steve I just leave it from that oh and put the terrain detail to 150
I've finally got around to making this one. My recommended settings for Quest 2 owners, for both 1080ti and high end users. Hope it helps!
Great video! this was very helpful, I have 3080GPU getting pretty decent performance, only issue is when closer to the ground I get kind of a wobble effect on the ground textures, any idea of what setting to tweak? thanks!
@@juankaramirez me too! It's like terrain is under 10 cm of water (with waves). I can't get rid of it.
Awesome I’ve been looking for a video like this! Thanks!
Thanks for mentioning the 1080ti on Quest 2.
@@juankaramirez It might be that Oculus is forcing you to use Asynchronous Space warp, I'd recommend manually turning this off in either the debug tool or tray tool everytime you are in VR in the sim.
Mate you are an absolute legend for making these videos. Must have saved tens of thousands of man-hours of your viewers tweaking settings by now. Appreciate it a lot
That's ok, if it helps get people in the air it's all worth it :)
Just tried this… getting a solid 40 fps! That’s 10 fps extra than normal…love it, cheers Dude!
Excellent and thankyou for your support!
WHAT THE HELL ITS SO SMOOTH. I WAS RUNNING ALL LOW SETTINGS BEFORE AND ITS MUCH SMOOTHER ON ULTRA SETTINGS WHATTTT??
Been subscribed to the channel for a while and tried a few setting but I was still finding looking outside from the cockpit a bit, well a bit wavey, the high spec setting on this tutorial have totally transformed the experience, so smooth in a flight just now over a cloudy London and the instruments are crystal clear! Quest 2 running on a 3090 with 32mb RAM and i9 7900 with MSFS now running on its own M.2...Thank You!
Wow, after so many videos and forums, these settings rocked on my 3080 RTX OC. Smooth and great quality. Thanks! New sub here.
Awesome and welcome aboard!
These setting work really well on my system thanks. (quest 2, i7 9700k, 3080 founders)
That's great to hear thankyou 🙂
Thx for this video, I got great results with your settings, I thought that with the openXR toolkit the OTT was obsolete, but with both running on your recommended settings I got a much clearer picture with framerates around 40.
This is what I've been looking for!
I'm new to VR and DCS so I'm going to give these a shot. I didn't realize the OpenXR worked with Oculus. I have similar specs (i7 10700k, RTX 3090, 64gb RAM) and I've been trying to optimize my settings with the 3090.
Thanks so much!
My pleasure I'm glad to have helped 😊
@@VRFlightSimGuy I can stay locked at 80fps in DCS with these settings. I'm not using OpenXR Toolkit. Should I?
Also, do you like setting OTT SS to 1.2 and turning off ASW? Seems to have worked good for my 3090.
Thank you - followed your setting across the board and I'm amazed how good MSFS is looking :)
Fantastic!
Hey Mark, that was one of your better videos 🤣😂🤣
😂😂
OpenXR makes DCS work a lot better also. I'm not using SteamVR anymore on DCS, just OpenXR with my G2 and it is a HUGE difference.
Steve (and Mark!), thank you so much for this update. I have my 2080Ti card with a Quest 2 so I'll be circling back this weekend to compare my settings with yours, to see if I can get any improvements. As always, keep up the great work! It's hard to keep up with these constant updates and changes. ;)
Thanks buddy, I'm always willing to learn from the community. Let me know how it goes :)
Some useful settings also for us poor Quest 2 owners... :) Gonna try them tonight! Thank you. Great work as usual.
My pleasure Luca thanks for your support
Thank you for putting this together! Does it matter how the Quest 2 enters VR in the game? I’ve tried just running the game on my desktop then doing alt-tab to enter VR, I’ve also launched the game through AirLink/VirtualDesktop and then entered VR in the MSFS menus. Right now I’m testing slightly decreased graphics settings values in-game (since you’re running a 3090), but I still haven’t been able to get the frame rate smooth, still lots of jitters unless I move my head very slowly. I’m running a similarly powered CPU to yours and a 3070, I feel like there’s got to be some combination of settings that would allow this rig to run it decently!
Im still upgrading pc and cant wait to be able to fly vr 🔥🛩
thanks for sharing, this is fantastic.
would you mind detailing your startup steps? from powering on the PC, to starting OTT, OpenXR, oculus software, MSFS, etc.? have you automated the startup process at all with a batch script?
My pleasure. For the Quest 2, it's much easier, I turn on my headset, connect to airlink, run the sim, I do not jump into VR until my flight has loaded, then make sure my tray tool us using asynchronous spacewarp or, turn it off (that last step is important). Cheers.
@@VRFlightSimGuy I know this is an old comment but can you elaborate on the ASW part? You make sure ASW is on in the tray tool or turn it off? I'm having a hard time understanding that bit.
Thanks for this great video!! Big improvement! Just started to follow your page! I’m using Oculus Mirror + OBS to stream in fb or recording. I’m having stuttering issues every time I start using mouse to navigate or click instruments inside cockpit. The only way I get it to work is hitting the “window” button in my keyboard and clicking outside the msfs window, but as soon that I click back to msfs, mirror starts to stuttering. I’ve searched everywhere but with no success. The stuttering is just in the oculus mirror because while flying everything is smooth inside the VR. I have Q2 using a i-9 with a 3090.
Hi I must be doing something wrong!
Brand New Pc 3080rtx, i7 12700kf. 32Gig Ram
Getting confused with openxr/ Runtime? Really don't understand this despite loads of googling
In the oculus app it says "Oculus is set as the active Openxr runtime." Is this correct?
Developer settings in Openxr toolkit say Motion Reprojection Disabled
In OpenXR developer Tools it says "The windows Mixed Reality OpenXR Runtime is installed but is not the active OpenXR runtime" Again is this correct?
Now in the oculus app if I have Rendering Resolution at 1x in 80 or 90- Hz everything runs really smooth although I would not say they graphics are "great" bit shimmery/pixilated, but in msfs a lot of settings are on Ultra . If I take it over 1x in the oculus app start getting jerky stutters out of the side windows, but it does look better. However I prefer smoothness
I have to run the oculus debug tool Toggle windows visibility. Tray tool also running 1.3 ss, ASW off FOV 0.7 x0.7
Where am I going wrong with upping the render resolution in the oculus app causing stutters? I am happy with the smoothness just want to improve the look, and really really confused with all this openxr stuff is this right that oculus controls this as above?
I tried the OpenXR toolkit, but could not manage to change any settings in that, the menu would only stay on screen for about 8 seconds and then disappear.
Your videos are great but a really simple guide for old ones like me would be fantastic. Ie setting up from scratch. I seem to spend 90% of time changing settings and not enjoying it.
Using Link Cable
Thanks very much for any help you can give
Yep, I'm hearing ya buddy. There is no youtube channel that explains it in laymen terms. It's all a head fuck and really frustrating.
Thank you for the video. I am running a 4090 with the Quest 2 with the suggested settings, but I am still getting some rather blurry results; so much so that I am unable to read the buttons next to the GPS etc. Is this just a limitation of the headset or do you, or anyone else for that matter, have an awesome suggestion at hand?
I will try that. becouse i am almost giving up. My msfs with quest 2 is terrible. Thank you from Brazil
Thank you so much for making this so much easier for this novice.
On a 3090 with an I9-12000k
awesome video thanks for sharing!!! can't wait to try these settings out this weekend. Any plan to make a similar video for Elite Dangerous? (ofc horizon not ods)
Very helpful as I've just got a quest 2 paired with a 6800 xt
Thanks Steve will try that tomorrow after work
Even I never fly with my Quest2 is good to know some Q2 optimisation stuff. The next question in our Discord will come for sure🤣
Thank you and take care buddy 👍
Haha thanks buddy, why would you when you have the best VR headset in the world 😁
I appreciate your video my friend! Liked, subbed and wish you all the best!
Thankyou so much!
Hi.
Now you have 13900k and 4090 (same as me) what settings would you use for quest2 or pro.
I have the pro, so im interested.
Great videos mate.
Wonderful.
This is wicked mate! My settings are
I7-2600
Gtx1650 with 16gb ram, using the quest 2, which settings would you recommend?
oh nice... this is relevant to my interests ;) time to open msfs vr black box
Hey buddy, best of luck. I've noticed you are getting great results anyway, so be careful, I'd hate to mess things up for you.
@@VRFlightSimGuy ah I get good results in xplane... just haven't tried msfs in a while... won't mess anything up in xplane ;)
I had a G2 and didn’t like the eye focus issues, it was buggy (working some days and not others). Even the headset is not as comfortable as the Q2 aftermarket Halos. Bought a Q2 and absolutely love it. Half the price of a G2 even with the Halo headset.
And as I’m still running a 1080TI, I find I can up the graphics setting so my visuals are better. I’ve been running at 120htz as I’m only flying slow GA (C150/172) so MSFS can keep up. I assume however that flying jets like the Hawk requires MSFS to load graphics much faster and thus the need to lower the htz setting in your video?
The biggest thing I found moving from a G2 to a Q2 is that not having to be tied to a computer, I now use VR far more than I ever did with the G2. I truely thought I only wanted to use VR for flight simming. How wrong I was. Everything from watching movies to playing Onward in my backyard where I move around physically rather than just moving the controller. And the headset is now available for others in the family. Simming is now just a small part of the VR world. The G2 is stuck to a boat anchor that limits the true VR experience.
Isn't it funny, I disagree with pretty much everything you've said regarding the G2/Quest 2 comparison but glad you are enjoying VR, that's all that matters. I do agree the Quest 2 is a fantastic all round VR headset though, I use mine daily for wireless gaming. Cheers.
Are you using pc link (cable) wireless or software for connection to the PC?
Great video. I love flying in VR. How did you record MS Flight in VR. Have you made a video on that using the Quest?
Thanks! Using the Oculus mirror here :)
Ok, everytime I try to change the settings with openxr while in vr, it just crashes msfs and I don't know what I'm doing wrong. I'm starting the game normally but just hitting vr mode
I'm gonna try this because I'm a little frustrated with the Quest 2 and I'm Using a 3080Ti.
what is the configuration in virtual desktop? following your video. I have a 2080 super. thank you in advance
Hi great channel love it
Can you help me I have the quest 2 but it's like looking through water
As for distance it's like the world is moving horrible tried debug all the rest of the things you mentioned on your channel I have a 9 series cpu a 2080 super card and full of memory
Yet the picture is just rubbish in the head set
I brought two g1s both went bang flickering eye so decided not to buy anything from them again maybe I should have brought the g2 or something else
Gutted help !
Nice intro! 😄👍
👀😅😅
I wish there were an easy way to capture the actual image we see while using the Q2s.
Thanks very much 👍
You're very welcome!
Love Your videos. Would you have an idea why I can’t see the open xr toolkit menu in my quest 2 googles? I can see the timer countdown to press CTRL f2 but when I do nothing happens?
Do you have to have virtual desktop for this or can use it with the link cable? Cheers.
Guys! Use Mirror FOV Multiplier 0.70..... Now its super smooth!
Thanks for this setup, it's very smooth. Only thing I wish you'd caveat in these videos is that it's normal for it to stutter a little as you look out the window, easy to get used to but if you don't know, you end up playing with settings for hours just to realise it's just a Sim limitation
Hey Sam glad my video has helped. It's normal for the odd stutter, but it should be rather smooth most of the time when using ASW. Cheers!
@@VRFlightSimGuy great to know, I tried fiddling with every setting including the minimum graphics, I'll give that another try today 😊
@@VRFlightSimGuy 18Hz actually worked a treat here :-)
@@borisagrees can you explain further? What 18hz are you referring to
Thanks for this video again :)
What iis the name of the application you use for set the FSR at 5:20
Thanks in advance
My pleasure. It's the Open XR toolkit
@@VRFlightSimGuy Thanks but I ask the application with gray interface you show at 5:20. if Open XR toolkit I dont know how the open this popup with FSR item.
Hey I downloaded OpenXR Toolkit beta 3 and ran it but I didn't have any of the fixed foveated rendering settings - do you know what is up with that? (edit: read the notes on the web page... apparently only Radeon 6000 series GPUs running DX12 get the feature)
I would like to see settings for X Plane please. Otherwise another great video.
Thankyou, unfortunately my channel views indicate very little interest in x plane 11, which is a pity as I do love that sim.
I am strugling for weeks now to get a smooth experience in FS2020 with the Meta Quest 2. But the connection...There is something not good somehow. I have USB 3.0 but the Oculus app says i do not have 3.0. Flying is smooth but there is a constand jamming effect...Like the cable is a bit broken...wich is not. My system Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz 3.60 GHz - GeForce RTX 3060 Inno 3D 12GB. RAM 16GB
Hi, I have quest 2 with 3090 and with DLSS enabled I can't read anything in the cockpit and I got very good vision. upgrading to a better set like crystal and 4090 will improve the ability to see markings and texts in the cockpit ? Thanks
could you please upgrade this tutorial? its many new setting, lets see what you use now
I already have, check my recent videos
i have have openxr configured but that openxr setting in game doesn't open
Hi VR Flight Sim Guy, not related to the settings, but how do you record your FS2020 VR session? I experimented with OBS by "cut" one eye only and then resizing the view, but the resolution is bad. Also, try with oculus mirror but my performance is degraded a lot (I9-12900K, 32Gb, gtx3060). Thanks in advance!
Haha! great intro!
😁
Can you do a video on how you record your flights?
Probably not, sorry.
1:40 I could't agree more. I've recently upgraded from 2070 to 3080Ti... I wasn't expecting that better framerate would have such an impact on immersion. It's just undisputable if you ask me.
How does it work with the 3060 card?
In your video from 3.12.2021 you had quite different settings even in Oculus Tray Tool for example ASW..I am not sure now what to use? I have nw Oculus 2 and using for now airlink.
The ones on this video is my latest 👍
just orderd my G2 V2 should come tomorow they say they going like hot cakes not many left in and they only had them come in today whats a good GPU CARD for the reverb g2 v2 is the 3080 good i think i can strech to that but the 3090 is a bit out my range for now
Where did you order the G2V2 please? They appear to be out of stock everywhere I’ve looked. I think I’ve had it with Varjo and will be sending it back so now it’s a decision between Pimax & HP. (I’m in the UK)
Hey magic, congratulations on scoring a G2, they're pretty hard to get hold of as you say! A 3080 will rock, if you can though, the ti version would be perfect as it performs the same as the 3090.
@@VRFlightSimGuy ok i look into the 3080 ti i have seen them have to look were is the cheapest to buy any thoughts on were to get one from
@@VRFlightSimGuy let me no if you can were i can get the cheapest
3080 ti to get the max out of the g2 v2 when i get it today am looking forward to play on the g2 v2 as you give it so much hype
@@VRFlightSimGuy cant get the msfs running every time i try to load any of the flights on the sim goes into it some times then other time it dont just crashes open xr tool is all side ways when you press on ctrl to get it up its not square in front of you can you help me out
Best VR flight in terms of quality & smoothness since I upgraded my RTX 3060 to a 3080 TI! I see no FR (frame rate) difference between 90% or 100% in the Open XR Toolkit, and have the middle/outer set to 1/4. 40 FPS around my local Melbourne AU landscape with Photogrammetry OFF as I continue to suffer from severe 'candle wax' scenery below 2,000ft 😞
Only other difference maybe I recently enabled RBAR (Resizable BAR), including using the Nvidia profiling tool to ensure flightsimulator.exe was using the potential memory enhancements.
Eqpt: Quest 2, Intel 12900K, 32GB (3600Mhz) RAM, RTX 3080 TI, Motherboard Z690 UD AX DDR4 and an MVMe 1TB primary drive for OS/FS2020
What is exactly reason u replaced rtx 3060 with 3080ti? What brand 3080ti u have? Did u change because new card has higher processor and memory frequency?
@@Fullhouse0056y6 After months of tweaking i could not obtain the clarity or performance I was looking for on the 3060 and the 3080 was an affordable upgrade.
Having issues with the toolkit. It seems to be erratic on the fps and strange watery effect
What do you use for capture please?
I have a 1080ti. Would you say its worth the bog investment to go to the 3080ti.
Im noticing small stutters despite trying lots of different variables.
It makes sucj a difference to the immersion
I'd wait now mate, the 4 series cards are not too far off being launched. Much more powerful than the 3 series.
I would like to ask. When using airlink, do I need to use also SteamVR to be able play MSFS?
That's a negative.. use the Oculus software only. 👍
Hi, I’ve got the sim running smoothly in vr but I’ve got a lot of tree shimmering and at distance near the horizon things look almost black and white. Is the a fix for this?
question, are you running the oculus tool kit and the open xr tool kit at the same time?
That's affirmative, however you don't need the open XR toolkit running in the background. Just enabled it and access it through the in-sim menu whilst in VR.
how should I enable openxr and not oculus? when I set it as default runtime from openxr dev tool, msfs says no headset detected when trying to change to VR. Should I install WMR or what?
i'm new to VR and i'm kinda lost
Join the club
hey uh does open xr work for blade and sorcery?
Hey my dude... so I've been working on settings for my system. The OpenXR thing is interesting, but it gives me maybe around 2fps (if that)... not seeing a big jump using it. Is this for steamVR? I run everything on oculus native software (if I can) Just curious about this program since I've never used it before.
I will say I am back to using OTT... ;)
after more experimenting, its not really giving me more frames, but does make it smoother... and the capture smoother.... so OpenXR seems to be good in that respect.
Hey Raven, yes the toolkit only works with Open XR, have you messed around with the fixed fov rendering? It's a pretty nice increase in performance together with the NIS scaler. The OTT is great though, especially as you can save your settings. The only thing I so notice is you have to keep resetting the ASW mode once in VR, otherwise it can be a bit of a stutter fest.
@@VRFlightSimGuy yeah the fixed asw made it work! made a little short... its dark but ... was my first short ;) Thanks for your help!
Hi, how well Mid settings work for AMD RX 6800, cheers
I've no idea sorry.
You need to do the accent next time Steve, you would have got me then
I'm soooo bad at accents.
how do you get to 4:44
This solution didn’t work for my 1070 ti problem. It is still stuttering ….anyway thank you for give me hope for try…
Np. Your 1070 is working very hard with the Quest 2, you'd be better off with a Reverb G2 with a native DP.
@@VRFlightSimGuy thank you for your answer,i think i have start use eGPU for my asus rog laptop because my laptop 1070ti is not enough for MSFS2020 VR mode.do you advice me good GPU card model for MSFS2020 VR mode_
Don't forget Reverb g2 settings.
You've missed them, I've devoted a whole video on it.
Ok so you are saying keep supersampling like close to 1.0? AND ASW???
I rarely recommend super sampling, it's hurts your GPU sooo much unless you have the headroom. ASW locked at 30hz is really great so long as you can reach that target. For you, that would equate to 27fps as the Rift also runs at 80hz. (If my maths is correct)
@@VRFlightSimGuy hmmm may try this when i record this weekend. Thanks!
@@belgeode If it works, I take full credit, if not, it's theVRpilot's fault 😁
@@VRFlightSimGuy seems fair. Lol.
Control-F2 does not bring up OpenXR Window in my Quest 2 Headset to change things shown in 5:23..... Please help....
Might be worth popping over to my Discord for more help.
@@VRFlightSimGuy : OK, now what.... Really would like to find out why I can't get that GUI Popup to use the shader appearance cause default MSFS2020 in VR is lousy.... Been begging Asobo to work on VR, but it's not a priority
I wondering, how did you record this in VR?
anoying
Well I can not get on with open xr tool it just looks horrible with my quest 2 looks a lot better with it not on with your setup steve I just leave it from that oh and put the terrain detail to 150
What aircraft is that?
Hawk T1
Too much talking. Not enough directions on how to do this. I don't have all day, bud.
Glad you enjoyed it!
What still no wider FOW? Sorry, not interested.
Huh?! FOW back atcha!
A confusement has occurred. 🤣😂
Next I'm gonna say... Goooooood evening folks this is Belgeode and WE ARE BACK!! 😅😅
@@VRFlightSimGuy 🤣😂🤣😂
Gotta pay royalty for that though... and Boomflowah.
@@belgeode 😂