2018 Ford F-150 Headlight Adjustment process
HTML-код
- Опубликовано: 28 авг 2024
- Here’s how I adjusted my headlights after leveling my F150
Here is a link to the level kit and wheels and tires
Level kit: amzn.to/3nfqRY4
Wheels: amzn.to/38zteAK
Tires: amzn.to/32BrP8V The above links are my Amazon Affiliate links, as an Amazon Associate, I earn from qualifying purchases. Thank you for supporting my channel!
Get your F-150 Accessories here: @t Thanks for watching! Please considering subscribing!
Dude thanks for the video! I leveled on my truck 2'' and added LED blubs to my truck. This is going to help me quit getting flashed by other drivers.
Yeah once you lift that front end, the headlights need to go down. Thanks for watching
Just installed LED bulbs and I’m getting high beamed by every car. They are ridiculously bright. Thanks for sharing. Looks nice and easy to adjust.
You bet! 👍
Standard #2 Philips works WAY better than a flathead. If you turn that adjustment knob sideways, you can see it’s just a gear on the back that turns a threaded rod. If you turn your screwdriver while it is tilted sideways, you can see the gear turn super easy.
As far as adjusting for height, you need to be on flat level ground so the headlights can be adjusted to even. If you park approximately 40-60 feet away (3 full car lengths) and adjust them to just below the headlights at the impact point. If you look down the side of the truck, the lights should hit the wall a little below the headlight. NEVER ABOVE. That’s the point where you are blinding oncoming drivers.
Good tip!
Shoot, I just put LEDs on mine a little while ago and thought it would be the same huge process. Thanks for this dude!
Thanks for watching
Thanks for the video. My truck is also levelled with LEDs. Need to do this now.
Thank you! Very helpful since my truck got levelled up 2 1/2"
Thanks for watching!
Got fuel wheels on my truck to. Had 20's on my 2019 but downsized bak down to 18's. Got maxxis wheels and it looks awesome and raised the truck 2"
That sounds sweet! maxxis has good looking wheels!
Thank you! I have the same 2018' as well with a 2.5" 285/65R18, Constantly being flashed.
Sweet! What time did you go with?
I went with Toyo Open Country A/T 3 sitting on fuel wheels. They're very similar to yours.
Super helpful, great video! Thank you 🤙🏽
Great!!
Nice truck! I have the same model and year and colour except mine isn't levelled. I just purchased LEDs for the headlights from F150LEDs and will adjust now if necessary adding new LEDs. Thanks!
Those are sweet lights, thanks for your comment!
Thanks my friend 👍
Yes!!
Thank you bro, I appreciate you
Yes Sir!!
Thanks. I have a 2019 Roush with the leveling kit. Dealer says the lights are fine, but I constantly get flashed and there is no illumination difference between low/high beams on the road.
Yeah, should be an easy fix
Mine said the same. Just because they didn’t want to bother. My lights were way off.
Actually what is inside the space is a wheel pully, like the small one that put tension on the bicycle chain. With a light you should be able to see it. It is not turning the screwdriver, but turning that wheel.
Thanks for the detailed info
Most important comment here! Because using a Phillips head would’ve been way quicker. Thanks
Thanks, very helpful
Thanks for watching! I hope I've earned your subscription!
Nice looking truck 🤙🏼
Thanks!
Thanks
Yes!!
Great video thanks a lot !!
👍
Thanks For the video
👍
So I got my truck leveled 2.25” & have for a few months now, also have put leds in & have been getting high beamed like crazy going to work in the morning the past 2 months. So I went to go adjust my headlights tonight since I finally had time to do it, but I’m not seeing a screw down In the adjuster like I’ve been hearing. I’m just seeing a flat surface with a clip off to the front side of the adjuster so I’m still a little confused & would like some help/clarification if you wouldn’t mind!
What year is yours?
you can use a #2 Philips screw driver
👍
Yup, the 4 sides of the tip of the screw driver mesh better with the little adjustment gear and spins pretty easily once ya get it going. Just did mine tonight
Thanks !’
Yes!
Are you able to adjust the headlights side to side (vertically)on this or other vehicles? Sometimes it's helpful to move the left light inwards if it's out of line. Thank you.
I’m not sure, that would be helpful to be able to do that
I meant horizontally.
These F-150s headlights cannot be adjusted horizontally
I’ve got a 2021 lariat. And I swear my left headlight is pointed further down than the passenger. There’s like a noticeable V on the left compared to the right. Is this normal ? I just had new headlights installed. They are stock lights. Through insurance. And I swear they are slightly different than before but maybe I just never noticed it ? I tried adjusting them with that screw adjustment and it didn’t seem to do much.. any ideas ?
I wonder if the headlight is installed correctly?
Having the same problem, I purchased a 2023 f150 around 1 month ago brand new. And I noticed how my driver side headlight is higher than the right side. Did you ever fix the problem?
Dumb question… Is there a certain distance you need to be from the garage door?
I was about 50ft, it should be somewhere around that distance
Sweet, thanks man
Love the truck and wheels. Which wheels do you like better. The vandals or sledge? Also did you put a 2" level on your truck? I have a silverado 1500 rst and front and back are only 1 1/4" diffence and don't want the front sticking up in the air. Thanks
I like the look of the Vandals better. The Sledge wheels are very popular in my area. I put a 2” level on the truck, and it sits level now
Was your truck exactly 2" different from front to back before you got it leveled?
I didn’t measure it, so I can’t say, but it appears to be “level” now, so it was close to “2 difference
Thanks
Hey its me again....lol. im looking at buying some fuel vandal wheels 20x9 with falken wildpeak at3w 275/60. Rigjt now I have all stock. 18" wheels with 265/65 tires. Im really torn on what to do if the 20" wheels are worth it..was going to get them but I started reading some cons on getting a bigger wheel/ tire. Im ok with the loss of maybe 2-3mpg. However, i read it could be bad for your truck in the long run since the truck was made for the size of wheel/tire it came with. Adding all that extra weight might not be good. Hope this makes sense. Thanks for any help you can provide as with your experience.
It's designed for a philips screwdriver, not a flat head
Okay, thanks
I just got my truck level 2” how many inches I have to lower the lights ??
Probably a couple of inches
@@Myksgarage ima try to low the light 3 inches see how it goes thanks
Need to adjust horizontal. Idk how the hell you can get in without taking the fenders off
Yeah
What’s your wheel & tire setup man ? Looks great !
I’ll do a video of it, stay tuned
Sounds like Zach Galifianakis owns a F150. 😂
Heck yeah! How'd ya like my performance in the Hangover?
use a philips screwdriver iworks better
Thanks for the tip!
there is no way to adjust them properly for on coming traffic by shinning them on a garage door
Oh??