About time somebody built aftermarket for a first gen or any old Dodge.. you can get parts for a Chevy or a Ford at Toys r Us and they are out of business more than you can on a dodge and there are a lot of us out here
I've done ls and hemi swaps on these trucks. I've reused the factory trans crossmember in both with little modifications. I'm very interested in your crossmember. Looks like a lot of room for exhaust. I'm liking the headers. These trucks have very narrow frames so headers can be a pain. What would be really nice if you guys would build a ramcharger style fuel tank setup for efi.
@@jasonburress8201 all of the gen3 hemis are the same size as far as just the engine. The difference will be with the front cover the car and trucks are different.
That is SO badly needed, after these plastic tanks get old they're virtually useless. As near as I can tell, there's NO way to repair a crack and if you let it go, you'll have nothing but a big piece of cracked plastic. There are literally HUNDREDS of wanted ads for tanks and no supply. After you've jigged up the tank, the fabrication cost is pretty minimal. I think it would be a small but profitable thing for Holley if they're interested.
That's awesome been thinking of doing a gen 3 swap on my 77 D100 the 340 I got in it is getting up there in the miles and I want to save it since 340's are starting to get hard to come by and Gen 3's are in every bone yard across north America and gives more power and headers is the only way to go on any performance engine
Anything coming out for a manual trans? I have a 78 D100 Custom Utiline with a 4 speed and I would love to put a 5.7/6 speed in the truck. If I can't do that, I'll rebuild the 440 and stay old school.
Great video.. in process of 64 dodge Utiline frame off restore and hemi 5.7 swap from 04 rumble bee ram..plan to also use the newer 545 auto transmission. Originally was a poly318 with 3 on tree trans..question is will your motor mounts and transmission crossmember work for my application? Thanks ahead..
Have you done a 4x4 yet? I have a 79 Ramcharger 4x4 that currently has a magnum 360/NV4500/dana300. I’d like to do an Eagle 5.7/8HP so my wife can drive it. I see you have the 8HP brackets for the crossmember, will it work with a 4x4 trans/t-case? And will you have a true dual exhaust for the Ramcharger?
would be nice if you could make some replacement upper control arms for that body style, i've looked for 2 years locally and online and cant find any that aren't altered geometry for lowered vehicles or falling apart they're rusted so bad and i have 2 vehicles that need them so instant 2 orders (hint hint).
New stock replacement upper control arms are out there for the D-series trucks. You can get two new uppers WITH ball joints, bushings, cams and bolts from a guy on ebay for $295 + shipping.
@@BERPSU1 unless it got put back up as of 2 weeks ago they dont exist anymore. also i have no idea where the ebay arms come from, what they're made from, 0 warranty of any kind, etc...
@@dungeonlord They're on there now. I've used multiple sets of them. Quality is fine and they have a one year warranty though I've never needed it. Quirkparts also sells the same ones.
Do you guys make any kits to swap a gen 3 Hemi into a 90 W250 extended cab long box 4x4? Thinking of taking the LA TBI 360 out of it next year and swapping a gen 3 hemi.
I haven't messed around with a 4x4 in a while but I'm willing to bet these motor mounts will work no problem. You can use the factory crossmember with little Fabrication.
@@78ramcharger53 advance adapters makes adapters for almost any combo you can dream up. You should be able to use your current setup with little mods. Maybe a different flywheel. You should have a 727 and a 203 t case. I recommend ditching the 203 and replacing with 205. The 205 is very strong and gear driven.
will a novak 4500 be able to handle the power? i want to pull the seized 3.9 out of my d150 but keep it a stick because it’s a standard cab short box 93
Most of these options are going to require a customer drive shaft. Good news is most driveshaft shops can make a pretty standard one for about 300 bucks.
What is a good manual transmission for this swap? I have a '81 w250 & really want a hemi swap & manual trans for offroading, towing, & highway. Love my 4 speed np435 which would be hilarious with 500hp.
That's awesome! Just yesterday I was thinking about a hemi in a D100 or tradesman van (I have a 73'). How much of this kit do you think would work in a van?
D100 and b100 frames almost the same. The biggest difference is the strut rod location. Trucks are forward the control arm and mount under core support and Van's are rear the control arm that mount a bit past the firewall. All these parts holley is building should work on the vans.
Awesome!! I have been wondering when something like this was going to come out. ALSO do you guys plan on a LS swap kit for this body style of trucks. Awesome work as always guys.
“Uh, uh, uh uh uh uh uh uh uh uh uh uh” in the first sentence and you leaned in harder the rest. 1:19 is all I was able to bear. I realize y’all are camera shy. You have to get rid of the uh’s. Uh is a symptom of not knowing what to say and your mouth running on anyway.
Finally, mopar’s getting some love from Holley.
Now how about for the W100-150's. gotta have the 4X4!
wanting it for my '81 w250!
Any word on this
The engine brackets work just fine on the 4x4 to I have done it.
About time somebody built aftermarket for a first gen or any old Dodge.. you can get parts for a Chevy or a Ford at Toys r Us and they are out of business more than you can on a dodge and there are a lot of us out here
I'd like to see transmission controllers for the 8 speed, or a integrated ECU/TCU from Holley to really streamline the process.
Sound German make one for the 8 speed
Hate that it’s taken 17 years but late is better than never
Test on my 1991 Dodge Ramcharger. I’d love a Hemi in it.
I am so pumped! I'm so glad I found this video! Def going to buy all these parts
I've done ls and hemi swaps on these trucks. I've reused the factory trans crossmember in both with little modifications. I'm very interested in your crossmember. Looks like a lot of room for exhaust. I'm liking the headers. These trucks have very narrow frames so headers can be a pain. What would be really nice if you guys would build a ramcharger style fuel tank setup for efi.
Will the 6.4 hemi fit in a 88 dodge
@@jasonburress8201 all of the gen3 hemis are the same size as far as just the engine. The difference will be with the front cover the car and trucks are different.
@@kirbywinters1291 what did you use for monts
That is SO badly needed, after these plastic tanks get old they're virtually useless. As near as I can tell, there's NO way to repair a crack and if you let it go, you'll have nothing but a big piece of cracked plastic. There are literally HUNDREDS of wanted ads for tanks and no supply. After you've jigged up the tank, the fabrication cost is pretty minimal. I think it would be a small but profitable thing for Holley if they're interested.
@@robertstout6980 Holley Sniper makes a steel tank for them now!
Stop hitting the fenders you both
That's awesome been thinking of doing a gen 3 swap on my 77 D100 the 340 I got in it is getting up there in the miles and I want to save it since 340's are starting to get hard to come by and Gen 3's are in every bone yard across north America and gives more power and headers is the only way to go on any performance engine
Wow a mopar vid lol, bout time.
New drinking game, take a shot everytime they slap the fenders
Yall should make a cast manifold turbo kit for the hemi like the ls has
Anything coming out for a manual trans? I have a 78 D100 Custom Utiline with a 4 speed and I would love to put a 5.7/6 speed in the truck. If I can't do that, I'll rebuild the 440 and stay old school.
I would love to do this on my 85 W100 and get rid of all that old smog setup that's in the way
If you use a tf727 can you use the original starter?
What did you do with the wiring? How did you control the transmission?
Great video.. in process of 64 dodge Utiline frame off restore and hemi 5.7 swap from 04 rumble bee ram..plan to also use the newer 545 auto transmission.
Originally was a poly318 with 3 on tree trans..question is will your motor mounts and transmission crossmember work for my application? Thanks ahead..
Do you have a adapter kit for the d250?
Will the crossmember work with 4x4
Wonder if they have anything out yet for the 1989 dodge w150. I would love to drop a hemi in mine that be bad ass...
Have you done a 4x4 yet? I have a 79 Ramcharger 4x4 that currently has a magnum 360/NV4500/dana300. I’d like to do an Eagle 5.7/8HP so my wife can drive it.
I see you have the 8HP brackets for the crossmember, will it work with a 4x4 trans/t-case? And will you have a true dual exhaust for the Ramcharger?
Do a shot every time someone slaps the fender.
Is there an update?
can we get a video of this big boy driving around
Awesome build
Do any of these swap parts work on the D250 2x4 8 lug?
would be nice if you could make some replacement upper control arms for that body style, i've looked for 2 years locally and online and cant find any that aren't altered geometry for lowered vehicles or falling apart they're rusted so bad and i have 2 vehicles that need them so instant 2 orders (hint hint).
New stock replacement upper control arms are out there for the D-series trucks. You can get two new uppers WITH ball joints, bushings, cams and bolts from a guy on ebay for $295 + shipping.
@@BERPSU1 unless it got put back up as of 2 weeks ago they dont exist anymore. also i have no idea where the ebay arms come from, what they're made from, 0 warranty of any kind, etc...
@@dungeonlord They're on there now. I've used multiple sets of them. Quality is fine and they have a one year warranty though I've never needed it. Quirkparts also sells the same ones.
Wsd suspension sells new upper arms with bushings and balljoints for a reasonable price
Would this kit work in a 97 dodge van? I have a 5.7 I’d like to install.
Trying to pair up a 3rd gen hemi to a np435 manual trans in a 84 w150 truck. Any info on clutch/flywheel?
I'm assuming these should work the same year ramchargers?
Need a installation video.
Do you guys make any kits to swap a gen 3 Hemi into a 90 W250 extended cab long box 4x4? Thinking of taking the LA TBI 360 out of it next year and swapping a gen 3 hemi.
Any chance w150 parts are coming? Wanting to do a gen 3 hemi and zf 8speed in a 1979 Powerwagon
I haven't messed around with a 4x4 in a while but I'm willing to bet these motor mounts will work no problem. You can use the factory crossmember with little Fabrication.
@@mattvorhees6055 Yeah I believe the motor mounts are the same. Not sure how the transmission crossmember would work with a 4x4
I'm wondering the same i want a hemi in my 1990 w150 shorty wondering about transfer case hook up and wiring also.
Should work the same with little to no modification, as far as I know the only difference on the frames from a W150 and D150 is the front crossmember
@@78ramcharger53 advance adapters makes adapters for almost any combo you can dream up. You should be able to use your current setup with little mods. Maybe a different flywheel. You should have a 727 and a 203 t case. I recommend ditching the 203 and replacing with 205. The 205 is very strong and gear driven.
Hoping for for some w100/150 stuff.
will a novak 4500 be able to handle the power? i want to pull the seized 3.9 out of my d150 but keep it a stick because it’s a standard cab short box 93
looks good guys!
Does the crossmber work on a 4x4 85 ramcharger ??
Fun game to play, how many times keeps tapping the truck while talking
Do you have kits for pentstar 6 with 8speed?
also if this is for any 3rd gen hemi swap what kinda brakes do you recommend for these big boys?
This is fantastic! What will you have to do for the drive shaft?
Most of these options are going to require a customer drive shaft. Good news is most driveshaft shops can make a pretty standard one for about 300 bucks.
Will it for for factory 1st gen 4x4 and maual trans from the 80s
I have an 06 hemi off a 300c pan is hitting any ideas to fix that
what mounts do I need, I want to keep the original 4 speed. will the 727 mount work for that, or can I use the original?
Does this also fit a W100 or W150?
Any mount plates for the dakota nv3500 behind it?
What is a good manual transmission for this swap? I have a '81 w250 & really want a hemi swap & manual trans for offroading, towing, & highway. Love my 4 speed np435 which would be hilarious with 500hp.
Tremec has a new 5 speed that would work great or a NV4500 will bolt up as well.
Wet fart @ 5:27
The way dodge should have put the engine in their trucks haha no fighting with spark plugs
I don’t see this in the comments-can someone tell me if the d100 and d150 use the same stock mounts as the d350? This kit doesn’t say that it would.
Make some turbo headers for gen 3 hemis
Could I use the same kit to do a 6.2/hellcat swap?
Is it better flows in x pipe or h pipe...im going side exit in front of rear tire
That's awesome! Just yesterday I was thinking about a hemi in a D100 or tradesman van (I have a 73'). How much of this kit do you think would work in a van?
We can't be sure. Haven't tried that yet.
D100 and b100 frames almost the same. The biggest difference is the strut rod location. Trucks are forward the control arm and mount under core support and Van's are rear the control arm that mount a bit past the firewall. All these parts holley is building should work on the vans.
why do i choose nag1,Since it is not supported by holley software...!!!!!
I need a kit for my 01 1500 4x4 to have a hemi 😮
do you have a pedal kit for the DBW?
So will the terminator x support the 545rfe. That would be awesome
Not yet!
Think it might before the end of the year?
Are the headers California complaint
Would this kit work for the 392’s, hellcat and the new hellaphant?
Yup. You won’t have any issues with the supercharger clearing the hood either.
Will the 6.4 l fit
Can this kit work in a 97 Dodge Ram Van?
What about a wiring harness
Awesome!! I have been wondering when something like this was going to come out. ALSO do you guys plan on a LS swap kit for this body style of trucks. Awesome work as always guys.
LS would probably be easier due being more compact and the standalone wiring kits
I need one for nag1 on 96 2gen
WTH why do you have to keep banging your hands on the fender. I lost count at 10 time
I don’t know what to do with my hands!!
In the first min.... quit slappin the fenders, or move the mic
Take a shot everytime they slammed the fenders while talking
“Uh, uh, uh uh uh uh uh uh uh uh uh uh” in the first sentence and you leaned in harder the rest. 1:19 is all I was able to bear. I realize y’all are camera shy. You have to get rid of the uh’s. Uh is a symptom of not knowing what to say and your mouth running on anyway.