Carver C7 truck maintenance - surfskate tutorial
HTML-код
- Опубликовано: 13 июл 2024
- carver surfskate C7 truck maintenance
cleaning your C7 truck is easy! follow along !
________
** DISCLAIMER: THESE ARE NOT PROFESSIONAL ADVICE. INSTRUCTIONS MIGHT NOT BE ACCURATE AND CAN BE OUTRIGHT WRONG. ALWAYS TAKE THOSE INSTRUCTIONS WITH A GRAIN A SALT. IF YOU ARE LOOKING TO IMPROVE YOUR SURFING, CROSS TRAINING AND PURE SURFSKATING SKILLS, PLEASE REFER TO A PROPER SURFSKATE COACH. **
______
Carver C7 truck exploded view:
www.kickpush.com.au/carver-sk...
mixing up the parts is impossible as each will fit only where it is supposed to.
if it is your first time cleaning your C7 truck, you might want to group them together and keep them in the same order to make it easier for reassembly (specially the thrusters and washers)
cleaning products:
1. your regular tissue paper for big chunks of grease
2. acetone for the stubborn grease (or any less harsh cleaning chemical)
3. disposable gloves to protect your hands
grease:
1. any grease will do (lithium or marine)
2. bones speed cream
no need to buy skate tool.
your regular hardware tool will do ( wrench, pliers )
HOW TO REMOVE THE SPRING BOLT? 1:44
ALL PARTS SEPARATED 2:43
GREASING 3:41
HOW TIGHT SHOULD THE PIVOT BOLT BE? 6:10
_______
thanks for watching,
LIKE and SUBSCRIBE for more content !
INSTAGRAM: / shanesurfskate
___
music:
Musictoday80:
/ musictoday80
/ musictoday80
/ musictoday80
ruclips.net/channel/UCxsF...
Music from Soundcloud
Music provided by RFM: • Video 
Спорт
![XO (Only If You Say Yes) - ENHYPEN エンハイプン 엔하이픈 [Music Bank] | KBS WORLD TV 240712](http://i.ytimg.com/vi/wBT1bKKwPTo/mqdefault.jpg)
Hey guys. Thanks for watching. Please support this channel and make it grow by SUBSCRIBING and WATCHING more of my videos if you haven't already done so. Thanks so much 🤙
Shane your a genius mate. Just followed this vid. At first i thought oh god what have i done. But i finally got rid of the annoying clicking and squeaking sound when i pump. The board works more fluid and responsive. Also it does give you a greater understanding of how a carver board works and the level of craftsmanship that goes into making them.
I'm really glad that helped 😊
disassembled, cleaned, and pout together my whole build yesterday thanks to your vid! Feeling super confident to maintain and upgrade now, you're a legend
When I saw the wd-40 I was like ohhhh noooo. But homie hit it right on the nail 😮💨💯
Thanks. Carver should have done this long time ago.
My C7 truck wasn't springy. I took it apart and cleaned it and adjusted it. Shane, you are the man, thank you so much! I don't think my C7 pumped this hard straight out of the box.
Thank you. I have 2 boards and didn't know how to maintenance. My husband's board is off and this was very informative for me to try to fix it.
Thanks for the teardown. Dreading opening up my C7 truck which I've had for over a decade and never properly taken care of.
Finally took apart my 2004 Carver C7 and it looked surprisingly clean and in good condition (I don't skate daily). I found the following:
1) Looks pretty much the same except no C-clip holding the spring bolt.
2) It was never greased or light grease wore off.
3) Two major areas of wear. These should have heavy grease: 1-Spring bolt wherever it contacts with the link. 2-nub on arm bearing plate which connects to the link.
Hope this info helps anyone maintaining their C7🤙🏾
Thanks mate. Good video for first timers. I enjoyed it too because you showed all the internal parts and workings before I decide to buy.
Awesome dude thank you so much! My spring broke a long time ago and I finally received my new one but didn't know how to proceed so again, thank you!
No worries mate. Glad it helps 😊
Thanks for this, Shane!
I'm mechanically inclined and have fixed cars and motorcycles, house wiring, computers and other electronics, firearms, and most other devices.
But for some reason I have been reluctant to disassemble ny C7. 😂
Maybe I just didn't trust those big stacks of washers to go back together.
Anyway, now I have no qualms about screwing with it.
This was awesome! Great tutorial, and great timing releasing the video when there's nothing else to do but skate! thank you!
Glad you like it 😊
Shane Lai
hi Shane! Thank you again for the video, I’m trying it out!
I noticed at 4:57 you flipped of the bottom thrust bearing.... does it matter which end of that thing points to the base? Same question applies to the top thrust bearing I guess!
@@jonathanmelamed7251 it does not matter. I had tried both ways.
Great video, just helped me fix a mistake I made with my trucks, thanks
Shane, you da man! Great video. Peace👍.
Thx ! this was really helpful nice and net
Thanks so much for this vid mate. Super super helpful.
'size 14' wrench; 14mm, which almost equals a 9/16". Not to be too exacting, but as a Machinist, that was a tad too vague.
Parabéns pelo trabalho, Apóiem o surfSkate em Cabo frio RJ 🇧🇷 obrigado a todos 🤘
très instructif merci
Thanks so much ur saving my life
*need this!*
thank you brother.
Just lost my spring tensioning bolt. Luckily it's only $6 and they offer free shipping right now.
can you do a Yow maintenance video? love the channel man thanks so much !
Gracias!!
Hey Shane thanks for putting this great vid together.
I just started riding my C7, and it's brand new. Do I have to grease it even though it's straight out of the box, or maybe I should wait till I've used it a bit more?
Great vid, thanks dude! The music is kinda too loud but the tutorial is great.
If you have thoughts about adjusting for a specific rider that would be cool. I’ve experimented tight and loose front and back. Not sure what I like best. About 5 hrs on my Carver Mini Simms so far.
Yoo i would love a tutorial on the wheels/bearings because im so stuck after my bearings exploded. Different trucks but im sure their similar surf trucks
hello !
What kind of grease do we have to use ?
thanks a lot !!!
Silicone Spray is a great 'cleaning lube' on these, btw!
Awesome video, cheers Shane.
Anyone know where to get the C7 thrust bearing kit in Australia?
hey bro amazing video! One question though, how are you cleaning these? wiping the parts down or soaking them?
Wiping is good enough
This was great. Any thought on how much time, miles, or other measure before this is recommended?
truck looseness is about preference.
for longevity, i would suggest to check your truck atleast once a month.
or more often specially if you like to ride very loose (the link might be rubbing against the walls and the spring bolt)
hey shane
i have a black coated pair of trucks will the acétone ruin the coating ?
Any part number for those thrust bearings?
Can you do a video on how to assemble the truck on the Carver deck ?
Yep added that to my list
I have a feeling I need some grass for my nerves while disasembling and puting it back together 😂
do you have a video for the rear truck? I can't figure out how to reassemble
Hi Shane, thanks for this tutorial. Could you let us know what is the grease you use?
Cheers
Premium synthetic blend Lithium complex grease
Thanks!
Hey Shane. Can you add grease to the spring? i did this and now the tension bolt is becoming loose on it's own when pumping. I've made sure not to grease beyond mentioned in the vid.
Yes. Add marine grease for extra protection against moisture. Cover the whole surface of the spring.
I had the same problem twice. Try cleaning all residual grease on the bolt head and in/around the hole. Also try not greasing around and into the spring nut.
For me it was fine after that
did you use something into the bushings?
Hi Shane. Im new to the world of Carver skateboards but loving it. I've noticed when i pump my front truck has developed a slight clicking sound. Have you come across this before buddy? Also me and my wife love the vids. Were both learning. Cheers Rich
Is the spring bolt loose ? Could be the link hitting the sides of the chamber. It's best to open the truck and see any unusual wear
@@shanelai2515 its brand new. Was told to try a tiny bit of oil lubricant on the bearings.
Did it work ?
hey @@shanelai2515. Yes it did. Just put a tiny amount in and the noise has gone.
@@shanelai2515 back again. Looks like i need to take it apart. It's annoying as I've only had it a few weeks.
Hi hi the pivot got stuck a d I can’t release it to replace. Any video o technical help for this?
I cannot find the thrust bearings for this with exact specs from Carver.... Carver is sold out and has been for some time. My housing cracked.. I have all of the rollers but dont think it'll be safe? Help!! Lol
hi, I have a CARVER RESIN 31 skate with truck c7, and I am having a problem with the screw that tightens the spring.
it comes loose all the time but too easily. I tried to disassemble the truck c7 and he cleaned the grease near the screw head (maybe he could make it easier to unscrew, like your advice) but it didn't help. after 30 minutes of skating I find myself with the screw completely released. what can I do? thank you
I had the same problem,I just didn't grease the spring at all and problem was solved.
How oftenn do you apply lubricant?
How do I know if my spring is broken. Is it supposed to make any rattling noises when riding and hitting bumps or rocks
Most of the times, it is the bushings that are squeaking. Put a drop of oil on it. That should do.
If your spring is broken, you won't get any rebound when you pump.
Still, it is good from time to time to open the C7 system to check for wear.
Sometimes the spring bolt is too loose, and so it vibrates freely as you move.
dude is there any alternative as speed cream
*this is why you get a Waterborne surf adapter*
Do I need to add grease, I bought a new truck and I just assumed it would come ready to use (Carver trucks come with no info / instructions) I've only used it for two days but I'd hate to damage it, perhaps I should open it up and grease it?
Yes you should definitely grease (marine grease preferably). Cover all part of the spring. Avoid the bolt head and hole
You may check them back fortnightly/ weekly for wear if you ride a lot
@@shanelai2515 can you use grease on the swing arm bearing? i noticed you used the bones for that part instead of grease
Le C7 de la compagnie carver est identique au smoothstar front truck?
Je pense que c’est un autre type de ressort qu’il y a chez carver. No?
C7 et smoothstar utilisent le ressort type compression.
!!!! Very important place missed !!!!
Link to link pin joint should be cleaned and greased well!
can the c7 be changed to cx by tightening it? if i tighten it is it safe for c7? or is it easy to loosen later?
No matter how much you tighten the C7, it will never feel the same as a CX. The C7 will always feel more 'flowy' because it has a long arm. Also over-tightening the spring will cause it to lose its elasticity (springiness) over time.
@@shanelai2515 thank you 🙏🙏
I had c7 for few months and it worked great. But lately whenever I drop the board looks like it is too loose and spring doesnt work. So I opened it and link covering spring jumped out from bolt. I put it on agine, adjusted so it si quite loose.but after every next shake it happens again. Nad spring bolt seems to be very loose and moving. Has anyone had similar problem?
First time i hear that. Is there any deformation?
How much grease is on the spring? I put way too much grease on the spring and after 30 minutes on my board the front would loosen. I could turn the spring bolt by hand. I've been having clicking sounds still coming from my front truck still. I think it's the bearing bolt? Got in touch with Carver and there trying to firgure it?
If I make kingpin too loose, is there a possibility it falls down while skating?
Definitely. Always check your skateboard for any loose parts.
As for me, i love my trucks as loose as possible but without them loosening by themselves with vibrations
@@shanelai2515 got it, how many turns from default settings is optimal in your opinion? From completely tight to fair loose?
@@DimaYamubei it's really up to your preference. I would go for loosest
Do I loosen the back truck if it's too tight ?
Totally up to your preference
Can I do anything of this trick's on any surface
Yup! And, consider your Bushings! You could (very inexpensively!) swap out a bushing or two, to a durometer that suits your riding style better! Look into these; Venom, Riptide, BloodOrange, Khiro or Bitch, or Jim-Z's. "PSR"