Elegoo Saturn Time-lapse - Mr. Belz
HTML-код
- Опубликовано: 21 авг 2024
- Another time-lapse of MSLA printing on the Elegoo Saturn. Total print time was 10 hours and 5 minutes. Mr. Belz was designed by David Östman (Eastman).
How it was made: www.hackster.i...
Model: Mr. Belz - eastman.xyz/pr...
Best video ever
Magnifique
🔥🔥🔥🔥
No supports whatsoever, impressive!
I would REALLY like to know how you get such smooth timelapses on your videos....
I recently did a write-up on the whole process. Check it out here. www.hackster.io/ryanjgill2/msla-smooth-time-lapse-199d87
@@ryangill9518 Oh, man. My game is going right to the top now. You rock.
Still waiting for the ultra fast resin printing for a reasonable price 😅 Uniz Slash Plus is 720mm height an hour?
That means this same model would probably take half an hour on the Uniz and not 10hours?
How did you get the timelapse so smooth? Without the retract movements?
I recently did a write-up on the whole process. Check it out here. www.hackster.io/ryanjgill2/msla-smooth-time-lapse-199d87
Awesome stuff! Is it possible for you to share your print settings? I seem to have issues direct build plate printing at the moment, Thank you!
Here is a link to the settings I'm using. imgur.com/a/FJrxw8I
@@ryangill9518 Thank you! did you also do the gcode fix or have you left it as is?
@@z69z I left it as is since I am getting decent results. I was part of the 1st wave of early birds. Not sure if that matters.
@@ryangill9518 Gotcha! I was part of the 2mm batch, thanks for the help!
i wish i could print with the cap off lmao
Bigger! 1/2 mask maybe