The New Best Resin Printer for Beginners? Testing Out the Elegoo Mars 5 Ultra
HTML-код
- Опубликовано: 4 июл 2024
- More about the Mars 5 Ultra: shrsl.com/4li9l
Ahsoka Bust: than.gs/m/961320
Queen Amidala Bust: than.gs/m/971145
Dagan Gera Lightsaber: 3d-mon.com/3d-model/groupe/ma...
- Materials Used* -
Standard Resin: shrsl.com/4lklq
ABS-Like Resin: shrsl.com/4lklv
Wash & Cure Station: shrsl.com/4lkm1
Also available through Amazon: amzn.to/3VWigMH
*Some links listed above are affiliate links (I make a % which goes towards helping create content for this channel at no extra cost to you)
Thank you again to #Elegoo for sending over the Mars 5 Ultra.
- My Links -
Instagram: / thearmorersforge
Etsy: thearmorersforge.etsy.com
Website: www.studioofmm.com
This is the third review I’ve watched. I may finally dive in.
Your work is out of this world! You make production level props and I'm baffled to see such a low view count. I really don't understand how YT algorithm works because this is exactly the type of videos taht I love to watch, and I had a hard time finding your channel after remembering your B1 Droid video. PLEASE keep it up, good and passionate work always pays up at some point.
Thank you so much for producing this video. Very helpful in making a decision.
Good timing! I’ve been meaning to ask you for a recommendation regarding a “beginner resin” machine.
Great dive into this new entry. To the shroud/cover, I keep my resin printers in a dark box for temperature control as well as odor reduction (vented to the outdoors), so I remove the covers and store them, so needing to remove a fixed cover would just add a step to my getting setup and printing.
I thought about doing something similar, just hasn’t worked out with my current workshop setup. Maybe in the future!
The details are amazing! That's where resin printing excels, compared to FDM printing.
This may be my next printer.
This is going to be my next printer upgrade. If you say it's a good printer, I am sold! Thanks Michaela for an awesome review!
You won’t be disappointed! What printer are you using currently?
@@MMsPropShop I have the Mars2 Pro, so this would be a nice and welcome upgrade.
@Dwight.Schrute69 definitely! I stared with a Mars 2 Pro myself. I thought prints could never get more crisp than on that machine, haha! Still use it occasionally to this day but it’s incredible the details that these new machines can produce. Smoothness as well since anti aliasing works even better when there are more pixels.
Would you make a safety video for us newbies on how to properly print with resin? I know resin is toxic but I want to see some resin printer setups to properly ventilate the machine! thanks!
I ordered the Saturn 4 ultra last week, Very excited to get back to printing. I may try a nice sized prop of some sort to really test it out. I think with innovations like what Elegoo have made and their price point some great technology I think we will see more and more people getting into it, Next step is a safer resin. Great vid as always👌🏻
Ooo exciting! Yes, it’s great to see all of these new features that are helping both beginners ease into SLA printing and giving more experienced makers less headaches to deal with, haha!
@@MMsPropShop Less headaches for sure, And hopefully now I won't run 8 hour prints but forget to put the plate in 🤦🏼😂
I won’t enter resin until they can make a non-toxic resin. I don’t have a ventilated area, with nobody in, and free from bugs :)
@@doctoroctos It will be a massive innovation when they do, more and more people will have them in their office/hobby rooms. I've been using water washable resin and I can only smell that when the lid is off the printer, even then it's not bad, smells like dirt to me 😂
Loving the resin props and busts. I have a soft spot for FDM but the quality of resin just can’t be beat
Definitely. I flip flop all of the time with what type of printing I enjoy more. It’s so cool what can be done on an FDM printer with all of the different filament types and colours but the details that can be achieved with an SLA printer are unmatched. Either way it’s pretty crazy than any of this type of stuff can be produced in one’s own home.
@@MMsPropShop Yeah exactly. The fact that you can have a machine that just makes things with a press of a button will never stop being incredibly interesting and fascinating
I have a Grogu stl that I sculpted in Zbrush and its got the hole and shell thickness all ready. If you want to print it for fun I can send it to you. Shapeways printed mine until I get a 3d resin printer. The Shapeways print kind of looks like white soap.
I know I'm in the minority but I like the lift off lid, takes less room and I have more space to mess with the build plate
I really appreciate you targeting us Noobs as part of your audience. Time to engage the channel membership option, I say.
It’s never too late to start a new hobby! Especially with 3D printers becoming more and more accessible to people. I’m honoured to be a part of anyone’s learning process!
Clone Force 99 in 3.75 scale, I’d commission that!
You have a beautiful voice .
Does anybody have some settings for this machine for stadard anycubic resin or knows where to find some?
I am about to purchase this, I see it has a tempered glass screen over the actual screen. Can you speak on that?
🤘🤘
I'm fairly new to FDM printing (mostly PLA so far), but am veey interested in resin printing for small details on greeblies and the like. Do you have any fume extraction for your printing room for the resin and/or ABS?
I pretty much always have a true HEPA and activated charcoal filter running. You have to be diligent about the charcoal filters, they have a lifespan of 3 months.
Obviously not a scientist myself and there are much more knowledgeable people out there about this kind of stuff, but in terms of the resin, because the exact amounts of various compounds aren’t known it’s hard to determine exactly how toxic it is. Most people are erring on the extreme side of caution, which isn’t a bad thing! A more reasonable approach to it is it’s most effective if you can filter the air/fumes with the printer enclosure itself. Some printers have a filter inside already but there are a few options out there that are rechargeable that can be added into any machine. Wearing proper PPE is also important.
@@MMsPropShop Absolutely! I work maintenance (HVAC, boiler, general mechanic) professionally at a hospital, and I am quite anal about the PPE and safety side of things. My basement shop (where I currently do my printing) has an exhaust fan in the ceiling joists, that go to a very short piece of duct, straight outside. I could (and probably would) add filters, but I like the idea of a fume hood above the printers too. I just didn't know how crazy you *need* to get with the whole thing, in a minimal/essential kind of way.
I'd likely be looking at the Elegoo Mars 5 like you've got here, as I really like that. I finally broke down and bought a Bambu Lab P1S a month or so ago, and it's nice to finally have a printer that doesn't need to be tinkered with, and just works. The Elegoo seems to be the same way, which is nice since I've never done any resin stuff myself. Like you, droids and lightsabers and other awesome props. I really like the flexibility of materials for FDM and having access to a resin printer as well.
Thanks for the quick reply!!
@Shadoweclipse1386 I’m not sure if anyone 100% knows how crazy you truly need to get unfortunately. I’m sure it’s very dependant on the specific resins as well.
Having both FDM and SLA is a game changer for props. There always seems to be at least one piece that would be better off in resin for either detail rendering or not having the hassle of sanding. If you live somewhere with weather, the resin projects will get you through the winter, haha!
If they make it 30x30x40 size it would be perfect :p
Pretty sure that kind of build volume only comes on multiple thousand dollar printers that are like 100kg+
I'm new to your channel I only discovered it a few weeks ago but your work is just beyond amazing literally beyond I love the Ahsoka that you made and of course Padme look awesome, I was wondering what lightsaber that was? Do you know what Jedi or sith it belong to or gray Jedi it was a very cool looking lightsaber? Definitely going to make a purchase from your store, if I get enough $, Lol . I'm disabled & have a rare bone disease, that only one in every million people get, so $ is tight. Much Obliged James 😁
hanks Much
It’s Dagan Gera’s from Jedi Survivor. It’s technically a High Republic era hilt so it has some very interesting design elements.
@@MMsPropShop Very AWESOME 👏 💯 ✔️. I kinda thought it was High Republic & thought it looked familiar, but didn't want to sound like a Uneducated so called Star Wars fan, Lol 😂. Everything was better in the High Republic, in my opinion, Jedi were cooler liking, better lightsaber designs & the Siths were Completely super magnificent looking, Etc. Thanks for letting me know. Have a Pleasant weekend friend 👋
I downloaded the app and then started a free trial just to see it before my printer arrived and the new elegoo mars 5 is not on there. How do I get it to show? Please help
It’s part of the 1.5.0 Beta. I would imagine that it will be part of the stable release by the time the printers are shipping out but if not, the 1.5.0 Beta is on the USB stick that comes with the machine.
@@MMsPropShop thank you so much
It can only print 77mm in height pictures on their website, making it look much bigger
It prints 165mm high. 77mm is the width of the build plate.
I hate how they will only send the "ultra" out to RUclipsrs and there's literally ZERO vids of the regular mars 5....
It looks like it might just be a production timing thing. The standard Mars 5 isn’t supposed to be out until the end of September whereas the Ultra is getting released by the end of this month.
@@MMsPropShop the website says "ships from US warehouse before July 31" for the regular Mars 5 as well... I keep thinking about ordering but not if its September :(
@adamvalencia1413 you’re right. Mine always defaults to the Canadian store which estimates September. Never would have thought the dates would have varied so much between countries.
O my gosh I totally agree
It costs about $270.00
My first print on this mars 5 failed :(
Oh no! Any idea what might have caused it?
@@MMsPropShop Guess it defaulted to the fast setting? I tried it next on normal setting and it printed correctly. phew
The resin is already moving around in a traditional resin printer, each time the build plate pulls away from the bottom of the vat and the descends again.
Oh definitely! It’s when the resin is moving around too much when it’s curing that it starts to affect the print quality. If you’d told people a couple of years ago that you wanted to make a printer with a moving VAT that would slosh the resin around constantly, they would have thought you were insane lol