Man u make it look so easy I had to mount two 22.5 on semi rims I had to improvise cause I didn’t have a bead drop down tool or a semi iron bar it sucked
Can put them on by hand. bigger the tire easier it is to put on but not everyone can do it so be careful I was on my way to a tire shop to put a tire on. It blew before I got there I used a tire iron and hammer to get it off put the other one on by my self lucky I had my little air tank handy took only five minutes to do surprised the crap out of the people driving with me they ask if I needed to call someone isaid no its already fixed they laughed and said yea right told them go look they could not believe it it was on a Honda accord 14 inch rim told them u gotta do what u gotta do
Holy crap DK!!! You are the man I was looking for. Crazy how your video popped up for me.. been looking for something like this.. 👍😁 Do you know of a low profile tire that is wide enough to fit on a super single semi rim. 22.5 x 14.00 wide rim ( machined down to 22 of course) I am doing a C20 Chevy project. Thanks!!! Great video!!! DK
You can do a 335 25 22 if you want a low pro tire an you can do a 355 40 22 if you want a MT tire. There's a few other sizes as well but those are the more common ones we use
@@hotlatino7220 no, I thought he was trying to mount a 22 on a 22.5 wheel. They will fit, but the bead surface is different. I’ve seen it done, but it looks sketchy.
Let Me Ask You A Question About Truck Wheels Probably You Know The Answer. Will 22" Inch Tire Fit On A 22.5 Rims Will .5 Will Make A Difference Or Not . On The Fitting Of The Tire .
You're a master at your craft. Made that look so simple, not damaging the wheels. Great work! If only the local techs were this personal!
Bro did I just witness u put 22” tyres on a 22.5 rim without milling it u are a badman
It was machined down
Man u make it look so easy I had to mount two 22.5 on semi rims I had to improvise cause I didn’t have a bead drop down tool or a semi iron bar it sucked
please make a video of the milled down process. I have never seen this before.
They are not milled!
Can put them on by hand. bigger the tire easier it is to put on but not everyone can do it so be careful I was on my way to a tire shop to put a tire on. It blew before I got there I used a tire iron and hammer to get it off put the other one on by my self lucky I had my little air tank handy took only five minutes to do surprised the crap out of the people driving with me they ask if I needed to call someone isaid no its already fixed they laughed and said yea right told them go look they could not believe it it was on a Honda accord 14 inch rim told them u gotta do what u gotta do
Did you ever make the video with how you balance them?
Holy crap DK!!! You are the man I was looking for. Crazy how your video popped up for me.. been looking for something like this.. 👍😁
Do you know of a low profile tire that is wide enough to fit on a super single semi rim. 22.5 x 14.00 wide rim ( machined down to 22 of course) I am doing a C20 Chevy project. Thanks!!! Great video!!! DK
You can do a 335 25 22 if you want a low pro tire an you can do a 355 40 22 if you want a MT tire. There's a few other sizes as well but those are the more common ones we use
How did u mill down that extra .5 off the wheels
Hi bro , Can do a 285/45/22 tire ??
How much do you sell the 8 to 10 wheel adapters for and can I get a link?
What size tyres did you mount ?
Where are you out of!? I need it done! ASAP!
Fort Wayne Indiana
I want to put some semi daully set up on a 2008 Chevrolet silverado 2500hd
Do you have to mill the wheels for a 22 to fit on a 22.5 wheel?
Where can I have a set of 22.5's milled to 22's
What torque do you tighten the wheels big lug nuts to the 10-lug adapters?
There 22.5 rim???
Do you guys have any other social media or website? I want to run 24" Alcoas but can't find machine shop..From hotter than shit Phoenix AZ THX!!
How can you tell if your wheels are milled? I’m running a used 24 set but I’m a little worried they wasn’t milled.
You gotta dismount the tire an look at the inside of the wheel
Are those wheels cut down to a 22” or are you mounting a 22 on the 22.5?
Chris Moore there milled down
Dk Custom Dually Wheels thank you sir.
Well we know a 22 gonna fit a 22.5 milled down to a 22. We thought you were mounting a 22 tire on a 23.5 wheel.
@@hotlatino7220 no, I thought he was trying to mount a 22 on a 22.5 wheel. They will fit, but the bead surface is different. I’ve seen it done, but it looks sketchy.
I want install mud tire 22 on semi 22.5 my question is I will not have problems with me truck later
you cant install a 22 tire on a 22.5 wheel
Where are you located
Let Me Ask You A Question About Truck Wheels
Probably You Know The Answer.
Will 22" Inch Tire Fit On A 22.5 Rims
Will .5 Will Make A Difference Or Not .
On The Fitting Of The Tire .
Yes he as a video
Can I mount a 22 inch tire on a 22.5 rim just wondering I heard you could but I don't know
No you can't. Check out my other video on milled wheels an it will explain why you can't do that
whats tires size?
Work the same as trying to mount a 12.50 tire on that wheel ?
yes sir!
I got request for an adapter wanna go this to something thing you could message me
Dk custom dually wheels who mills down the 22.5 wheels to 22s for you and price?
We do in house. $75 a wheel to mill down
@@duallykingindustries1297 whats the number
@@duallykingindustries1297 Where are you located?
@@duallykingindustries1297 do you have a phone number I've been looking for somebody to Mill down my 22.5
@@mudlifejunkiepr3937 812two1two 9zero76
What size was that tire
265 40 22
No real difference from mounting any other tire.
is that a 22" tire on a 22.5" rim
its a 22.5 wheel milled to 22'' with a 22'' tire
Show a video how to milled the rim
@@airrg1363 exactly
What state you in brother?
Fort Wayne, Indiana
@@duallykingindustries1297 dang I just moved to Florida from Ohio. You weren't far from me
How and where do you get them milled down?
DK Custom Dually Wheels. Fort Wayne Indiana
Do you sell used rims? I'm in Muncie
@@chevyman6112 yes give us a call
Where you from ? Do you have a number I can call ?
Fort Wayne Indiana. 812-212-9076
@@duallykingindustries1297 Do you have a email. If you could Send me, need a quote. alancascone@yahoo.com
Did you modifie the semi rim 22.5 and the tire a 22? Or is both regular size cause i heard people machine the rim down from 22.5 to 22
the wheel is milled down
@@duallykingindustries1297 from where exacly, is there a vid>