Audi A6 3.0T 034Motorsport Rear Swaybar Install
HTML-код
- Опубликовано: 2 дек 2022
- In this video I install a 034motorsport rear swaybar on my Audi A6 3.0T to deal with understeer and body roll that's inherent on VAG cars.
Here's a video that 034motorsport explaining how their rear swaybar helps the C7 chasis. Copy and paste the link i. your browser if it doesn't work here • How Would Your Rear Sw... 
Авто/Мото
Why haven't you received a sponsorship yet befuddles me. You give great product reviews 👏 as well as how to install videos
Thanks. I'll probably start pushing the videos to some of these companies.
I totally agree 👍 great job my boy
@@PopularityContest Thanks
Always great step by step details! Especially when you have no lift....
Yes sir👍
Dang, good video. Hopefully come summer time I could use this to install my own sway bar and end links. I’ve been watching your videos, seen you sharing them in the Audi groups and subbed. I’d like to see a video of how you jack the car up and set level on 4 jack stands.
Thanks 👍. Yeah I might do a video on putting the car on 4 jackstands. As far as leveling it I just make eyeball it and make sure I'm on a level surface. I believe C7 Owners did a video of putting the A6 on jackstands so you might want to check his channel out. I need a lift lol.
@@cmidas3396 Yeah, I’ve seen his video too but honestly it wasn’t really clear at all. I think I’ll get some jack stand pads and just position them all under the pinch welds beneath the plastic covers right next to the lift points n try that when I need to service transmission and differentials. But shoot, having a lift in your own garage is the dream hahaa.
Yeah your owners manual will tell you exactly where to position them.
@@cmidas3396 I even checked that out too but it doesn’t show where to set jack stands once it’s lifted with a jack using the lift points.
I usually move the jack over from the jacking point so there's enough room to put the jackstands in place.
@5:29 You didn't have to take the rubber insulator off the hanger. That muffler hanger assembly unbolts right off the underbody.
It does but it's easier to just slide the rubber off.
I think I might have to get one of these. I did an autocross with my A6 and the understeer was absolutely awful.
Yeah they have a lot of understeer. My brakes were awful too. I did a rotor & pad upgrade that did wonders for braking but I would say they still need more for such a heavy car. I just bought yellowstuff pads to try out before I do a big brake upgrade I have.
@cmidas3396 My brakes were fine, it wasn't a fast course, I think I hit maybe 60 in one spot. It did OK for what it is, but I could definitely feel the weight and soft suspension fighting against me.
@JSAFIXIT Yeah was getting a lot of brake fade when braking hard from above 60 though.
@cmidas3396 There are at least some good upgrades available.
I think I'm going to find a much smaller and lighter car to race with, it's fun tossing around a luxury barge, but going fast is more fun lol
another great video. i got a question to ask, have you ever notice when it rains hard and you open your trunk after that a little water runs out from the hinge. i have noticed this many times and i just want to know if this is a common thing. i found it to be strange, let me know
I've never noticed. I'm in Cali though so we don't get a lot of rain. I'll pay attention next time though.
Northeast cars definitely don’t look that underneath. 😢my joint got rust everywhere 2013. 👍🏽
Yeah I'm gonna get under there and deal with the rust at some point.
Did you end up replacing the links too? Or the stock one still working good?
I'm still on rhe stock links for now. Haven't had any problems. Still working good 👍🏽
Whats the stock rear sway bar thickness? I want to install this on my A6, I had a 034 in the past on my GLI and it was great.
Not sure what the stock thickness is. If I remember correctly this one is solid so it's a lot stronger.
So how many miles do you have on your A6 and what year is it?
2012 Prestige, 96k
Did you have problems with stock end links? I heard they fail on b8’s.
I haven't had any issues with them. I know B5 S4's required strengthening brackets but I don't know if that's the case with newer S4's.
Did it help with the understeer??
Absolutely, it helped a lot.
did you watch the video?
I estimate two more videos before that front lip disappears completely.
Yeah it's not surviving.
Just so you know the H&R bar is actually thicker.
Didn't know but this one is made to work with the factory front bar.
@cmidas3396 plus it comes with better than stock hardware so you still made a good choice 👍.
I truly hope that helps you when I bring my suprise challenge. Maybe I should let you do a few more mods because this will be your biggest challenge yet !!! I guarantee @popularitycontest for the win 🏆
Ah man, what have you done. I know you're gonna bring something with crazy overkill.
@@cmidas3396 Of course everything I've been bringing was set around your size and hp stock. I need something more suited to what I assume the current hp est. Goodluck you're definitely going to need it
Don’t you have 2 strikes ? 😮
@@sebastianlorenzo4935 Technically 3 losses 📉 But I brought 2 cars that were completely stock but his car is heavily modified so technically he's cheating 🤔. Don't fret my friend he will lose his streak in dramatic form
I have basic bolt-ons so it's not heavily modified sir.