Pocketbike Carburetor Leak - Quick FIX - 49cc 2 Stroke Engine Mini Moto, Dirt Bike, Quad
HTML-код
- Опубликовано: 18 окт 2013
- Video step by step hot fix leak from overflow hose in your 49cc Pocketbike Engine. The same engine is in all mini bike: mini motos, mini dirt bikes, and mini quads. If petrol leak from over flow hose it will also flood the engine.
SHOP HERE 👇👇👇 🚚 Fast Delivery to 32 EU Countries
minibikes.store/
Please SUBSCRIBE to get latest videos about Mini Bikes
/ @minibikesstore
CONNECT WITH US HERE!
Facebook: / mini-bikes-store-37621...
VIDEO BLOG: minibikes.store/video-blog
Join our community “Mini Bikes International Support Group - Mini Pocket Bikes, Quads, Pit Bike”
/ 697980870366878
Please, support our channel with :
LIKE 👍
SHARE ✉
SUBSCRIBE ✔
Pocketbike Carburetor Leak - Quick FIX - 49cc 2 Stroke Engine Mini Moto, Dirt Bike, Quad
#PS50PocketBike #MiniBikesStore #NitroMotors 
Авто/Мото
SHOP HERE 👇👇👇 🚚 Delivery to 32 EU Countries
minibikes.store/
That was a AWSOME ty very much for the info.
This helped me so much. I had to end up doing it twice and cleaning the air filter. Some how tiny rubber pieces got in. Thank you so much
big help thanks mate
Very helpful, fixed my problem. Very quick and easy
Definitely a helpful vid now I somewhat know what to do with my carburetor on my pocket bike when I get home from work
That "valve" is called the needle and seat in charge of shutting off fuel flow when the float chamber is full
Thank you that worked on ours ...God bless you
Thanks for this video solved the problem straight away 😊👌
great help cheers mate
Very good video, informative.
love all this videos
Cheers thanks for that,found 3 pieces of tiny rubber bits in there 👍
Great video
So does the blacl bit on tge pin have to be facing up or down
good vid if the sound was better
Has the vavle got a little pin that goes in and out when u push it
The float hasna ridge...is the ridge face up or down towardw the bowl
I have a crazy consistent leak from my over flow. So I'm going to give this a shot. I'm pretty certain this is my issue
Thanks you so much my one was fluded
Thank you for this video . Mine is leaking petrol out from behind the air filter. I’m going to try this method
Update :-) today I worked on my pocket bike using your video instructions . It fixed all problems, started right up and no more leaking . Thank you very much !
Mate imma give this a try in a few days when I’m free best of luck for me
Thank you so much
you're welcome
good video if the sound was better
I know nothing about motors and you fixed the.leak problem for me now it runs without leaking but cuts out after a minute or so
I know this is old but i don't have a air filter does that cause bogging?
if your bike won't idle can this be a problem making it not idle
I have a dumb question. Can I turn the bike upsidedown and do this?
Can you do a video of how to put it in properly please
Can you suggest an upgrade performance carb replacement for these??
you won't upgrade engines performance by changing the carb in this case, I would advice to instal big bore kit
Thanks
You're welcome
Mine was leaking from the air filter, the overflow hose then from the top of the bowl
This may seem a stupid question but im new to mini/pocket bikes so...
What is the need for the little black wire if theres no red?
you mean the black wire from coil? this is the wire to switch off the engine, when you ground this wire it will stop spark and it will stop the engine
Meanintg you attach this too?? what exactly sorry if this is a weird question
Good video but you need to look into terms of components like pin, float, jet etc. It will make sense to mos of us but there will always be someone that goes to workshop with whole carb and says ''I need this part here, dont know whats it called'' ;)
I am not native english speaker... so I don not know all words in English that time... I hope video helped you
What size the more i have same. 2cylce too right?
47-49cc or 53cc
+bikes4you why when i start my 49cc bike as soon as i sit down it turned off
Adjust the throttle position screw. It needs more fuel for idle. It's the screw on the side of the carb with a little spring around it. Tighten it a bit. Not too much, have it running when you do it
Probably needs a clean or change the air control
Please SUBSCRIBE to get latest videos about Mini Bikes
ruclips.net/channel/UCjmGnctv7sAks8Dx4cNB4hQ
This motor need cdi
hi
What's if my carburetor is new?
Ok whats the problem?
what a goat
My engine is brand new what do i do
Clean it also, Chinese engines have sometimes small particles in the carb
My sons 50cc starts but when we rev it a little bit it dies straight away what could be the problem?
Did you ever find the problem?
Mike hunt Dirty carb
My carb is sparkling clean but just doesn’t start/ idle for long , The spark plug is clean aswell
Mike hunt Check the tank for any holes, a small hole or a crack might be a problem also make sure when you were putting the carb back together that the throttle cable inside the carb is put in the right way and the screw on the side of the carb is regulated (best have it screwed in almost all the way and when the bike starts slowly undo it until the bike is running smooth
And of course I’m assuming that you have fresh petrol in the tank ? It’s not a few months old where moisture could of got in or it lost its “magic”
Can you do a video of how to put it in properly please
It only goes in one way I noticed. I didn't finish the video and have damn near this exact motor and carb. The needle would be facing point down into the hole and that it. Most of them are hanging on by a metal stap
That "valve" is called the needle and seat in charge of shutting off fuel flow when the float chamber is full
He's OK calling it a 'valve' if he so wishes. You often see the arrangement referred to as a 'needle valve', in fact it's in two parts the needle valve, and valve seat.