Why is there a gap between the flywheel and start motor/engine on my e91 N47? If I lay under the tranny I can see the flywheel. It feels like something should be inbetween this empty space
@@88CBAUGH Sorry for confusion. Ik how the starter works and all, but there is a gap/hole where i can look at the flywheel while being under the oil pan without dismantling anything from the car. It kinda looks like a half moon.
As per the repair manual, you have to replace all the time everything but because these are not aluminum bolts or stretch bolts or have a ° degree torq I use them every time when the kit doesn't have them and in the last 12 years I never had any problem 😉
I'm ok with everything but man, disconecting the drive shaft is pointless if it was a drive shaft problem car would shake while driving on certain rpm ,drive shaft is not spinning while the car is stationary
@@WarpDriveM ich habe Motorlager links und Rechts neu gemacht. Vibrationen sind nach wie vor da. Jetzt du bist mein Retter. Ich Versuche mein Glück. Die Teile habe ich schon gekauft alles zusammen 380€ .
Hello.i replaced my clutch and new one has came without that pice in midlle that you removed with allem key 14mm.it is normal?please give me your email address,i will send picture.i need some advise. Thank you
Hey, there are different parts and sometimes is normal to be without the plate. It will tension itself when you tight the bolts. You can contact me @warpdrivem on social media or Contact@warpdrivem.com
legend
Very informative, thank you
Can you make a list of the tools that you used to do the job? Like the 14mm key, Hex 6
Where are you located? How much do you charge to do this job
Perfect LIKE
What type of gearbox do you have on it zf gearbox or getteg gearbox?
Why is there a gap between the flywheel and start motor/engine on my e91 N47? If I lay under the tranny I can see the flywheel. It feels like something should be inbetween this empty space
@@88CBAUGH Sorry for confusion. Ik how the starter works and all, but there is a gap/hole where i can look at the flywheel while being under the oil pan without dismantling anything from the car. It kinda looks like a half moon.
Mine shakes when starting from 1st gear, mostly when hot but not always. Any idea what it is?? Thanks
Hi. What torque settings are there for the flywheel and pressure plate?☺️👍
The pressure plate screws should be replaced!
As per the repair manual, you have to replace all the time everything but because these are not aluminum bolts or stretch bolts or have a ° degree torq I use them every time when the kit doesn't have them and in the last 12 years I never had any problem 😉
Do you recomend removing CDV valve?
Approximately how long time does it take to change it??
If you don't have a lift aproximativ 7 hours, with lift 5 hours
what can it be if the car makes noise when the clutch is in middle ?
Usually is the throw bearing
What clutch Luk valeo ?
How did she drive after?
Perfect shifts, no more crazy vibration, pretty normal I might say.
@@WarpDriveM top man well done please to hear it. 👍
I'm ok with everything but man, disconecting the drive shaft is pointless if it was a drive shaft problem car would shake while driving on certain rpm ,drive shaft is not spinning while the car is stationary
Muss Partikel Filter auch ausbauen???
Nein
@@WarpDriveM ich habe Motorlager links und Rechts neu gemacht. Vibrationen sind nach wie vor da. Jetzt du bist mein Retter. Ich Versuche mein Glück. Die Teile habe ich schon gekauft alles zusammen 380€ .
Ich hoffe klappt gut! 380€ ist top preis, viel spaß
@@WarpDriveMdanke 👍
Automatic
Nope, it's for a manual car 🚗 😅
Hello.i replaced my clutch and new one has came without that pice in midlle that you removed with allem key 14mm.it is normal?please give me your email address,i will send picture.i need some advise.
Thank you
Hey, there are different parts and sometimes is normal to be without the plate. It will tension itself when you tight the bolts. You can contact me @warpdrivem on social media or Contact@warpdrivem.com