Видео

@@chazznl8823 not at all, I’ve actually tested these keeping them charged for up to six months at a time and they held pressure. However, the point is to have a fresh CO2 and use it when you are ready so you don’t have to worry about seals and O-rings.

@@chazznl8823 yes, and that’s about it :)

Thanks Folks!! Umarex will always have a warm place on this channel!

@@rosswalker3284 ROFL!!! I have no idea what that means but it’s pretty funny :-)

@@MultiDonna yeah, I know Houston Jones very well. He’s not exactly the average human though :-) he makes a living out of getting shot with different objects all the time. And if it affected him like that, you can imagine what it would do to a standard person :-)

@@AlternateArmsSD So true!! Not to mention if it hit you in the head and not the leg.....

Hey brother, looking at the description of the video and I have a direct link to her website. She ships all over the United States.

Oh, me too!!

Hehehe no worries man :) Yep, they are identical

Hey brother, take a look in the description. I have a direct link for you.

Hey bud where do I get it from?

@ hey brother, I have a direct link to her website in the description for the video.

​@@AlternateArmsSD where?

@AlternateArmsSD thanks I found it

I don’t believe so.

Thanks man!

You’re the man! :)

Hey brother, no, they are absolutely not compatible. They are totally different.

@@AlternateArmsSD right on. I messed up the internals anyways I just ordered another. Thank you

Yeah, I think my point was more to the fact that you can get to a point of diminishing returns with weight versus power. Also, and I’m pretty sure you agree with this, most self-defense situations happen from 3 to 5 m so you don’t get a lot of drop off from 9 to 15 feet :-)

@@AlternateArmsSD I don't disagree with the fact that you can get too heavy, absolutely. You can get too heavy as far as drop goes, though. And I'm not trying to nit pick your video, but you talk to a lot of people and someone sent it to me questioning what you meant by that after I've shown and taught the opposite and so have others. When you say heavier slows down faster, it's actually the opposite. And as a man of science and ballistics experience decades before less lethal, I needed to clarify. It's just dropping more proportional to the extra mass being affected by gravity more. I agree you can get a ball so heavy that you get no range because it drops too fast. But the point was, the extra mass actually makes it maintain speed better, not worse. I do agree on the distance statement, but for something to carry enough mass to have momentum enough and kinetic energy enough to overcome any amount of thick clothing, you do need heavier balls than 3g. And in fact, over a little distance, the heavier ball will loose less power than the light ball. I've done a lot of damage testing with same power, different weight and the difference is night and day as to how much energy is transferred to steel, gel (measured penetration of 3.7 vs. 9.9 is insanely different), etc. I agree that a 20g ball is too heavy for most launchers though. But I think a 7.9 to 9.9 is a good sweet spot for not dropping too fast but still carrying energy. For example, a 2.9g Byrna Kinetic will be slowed drastically by just the drag going through air in 15ft when a 9.9 will maintain most of it's speed and energy after 15 ft. Because it carries momentum the 2.9 doesn't. Momentum is mass x velocity. You will also see that light balls will not even have the same energy coming out of the barrel in most cases as a heavier (same diameter) ball. There's a reason they make bullets out of lead instead of aluminum. Even the metal jacket bullets have lead cores because we know the heavier we can get it for the size, the more accurate and more energy it will carry. With this stuff, power is much less, so we do have to find a compromise due to drop, but not slowing down. But that is really the only downside to extra weight, other than the launchers that simply cannot shoot heavy stuff because of the excessive burden on their internals. For example, Byrna claims shooting heavier ammo damages them. Another fun fact. In a modded VKS turned up, you will quickly break a pin with light balls. I tell people never to shoot under 7.9g balls in one I've built. They actually need the back pressure to keep from snapping the pin. The bolt slaps too hard at 50 joules with a 3.7 ball. Breaks almost time within a few shots if not secured. By the way, going to Germany for Less Lethal was pretty baller, I got to say

Hehe if it were up to me, this would be my full-time gig :-) I’m working on it.

@@AlternateArmsSD You have 20k+ subs, that's an entire community. You can push Combat video games as sponsors, they pay very good. I'll find out what I can and send through. I remember when YBS went full time, was pretty insane. Its a heck of a lot of money.

I’m actually planning a couple of pretty creative tests in the near future :-)

Yes indeed :)

Or identical brother, however, I do have an interesting test plan for the near future :-)

Same but maybe for the best. Cause people would crave the intrubusters that are no longer in stock 🤷‍♀Or manufacturing inconsistencies would cause different fps in both, leading to the wrong assumptions

Taiwan is what I understand, but all of the parts are assembled in a different country.

It’s not actually what I was seeing, I honestly couldn’t tell the difference. However, I’m going to set up a much more in-depth head to head when I get back from Los Angeles. Trust me, I’d much rather be there filming :-)

Yep :)

Thanks Brother.

@@NathanPayne-z2p Thanks man!! Yeah, once you HPA tap those, they go to a whole new level :)

​@@AlternateArmsSDonly thing is I would need to get fills and I don't need to know where I can do that without having a pump or compressor. There's a paintball field in my town but I'm not sure if they do fills. I'll start with an 88 G adapter with on off so I can get a full 16 unrestricted.

I spoke directly to Mercury rise about this. This particular release is not made by them.

​@@AlternateArmsSD i got similar email directly from mercury rise

My pleasure man! Yeah, that orange color was actually very cool!

Yeah it is-I was pleasantly surprised!!!!

From what I’ve been told, all issues and warranties will go through MR on the Intrubuster.

​@@AlternateArmsSDThank you 👍

Not necessarily, we’ve seen this in many launcher in the past.

Yes indeed. They are the exact same launcher.

@@AlternateArmsSD cool..thx..have a good day

Awesome man! You will love Texas. It’s becoming the last bastion of freedom out here :)

@@airgunballistics1779 My guess is that it was damage control more than anything else :) I can’t tell the difference.

@@AlternateArmsSD true

I grew up in Vista. My home now is in San Marcos. I just found a range that allows PCP weapons. It's in Fallbrook. Rainbow Shooting Range. It's a 22 cal shooting range excepting pcp guns.

I'd expect MCS to say the that the intrubusters at mercury rise are "not assembled correctly", because mercury rise is their competition. I just see mercury rise and MCS as two separate dealers/distributors for the pistelle x68, and thus they are competiting for your money of course. My intrubuster with 9.9gram riot balls produced 48 joules on first round. So i think it works fine. An email from mercury rise told me they manufacture for umarex, lancer tactical, and NXwerks.

@@michaelmeredith9141I take my Gavel to “The Gun Range San Diego” and they let rent a lane with no problems. FYI.

We need more of him 😅

I knew you’d dig it :)

Defense Innovation site

DI at the moment but I’ll have them shortly :)

I suspect Taiwan. Depending on the company, most buy them completely blank and brand them with their own logos etc. we’ve seen this with a ton of launchers out there.

Link is in description box of his previous video on intrubuster

Will it fit fsc with under barrel laser/light?

@@Gummie35 most likely if it fits the intrubuster. Email the manufacturer and ask them

Yeah man!

Hehe Not intentionally man :)

I'll wait for the Gen 2 of the Pistelle X-68 so they can fix any issues that come up over the next 6 months or so

@@Joreel Tru, these less lethals are driving me crazy, Im disappointed that the pistelle x/ instrubuster had a channel talk about a very cheap firing bolt that just made me change my mind, everybody want these less lethals, lethal so I'd say just by a firearm, nobody is never satisfied with power, so I'ma just stop commiting much certain channels because I feel that if I say I don't wont that pistelle or instrubuster i offend some they won't respond to me any, Thanks , i appreciate your info, this helps me a lot👍

Awesome! You’re going to love it! The tr50/HDR50 is one of my all time favorite launchers.

@@AlternateArmsSD Thanks I might give the instrubuster/ pistelle x 68 a litty time see if the minor issues don't go any further with more issues, some had no issues, I'm still wanting one very bad🙄

@ you never know what first runs. It’s going to go.

Probably a good idea 😅

Yes indeed!

NXWerks made the Pistelle X-68 for MCS.

NXWerx is the manufacturer. I suspect we are going to see big things from them in the future!

I reached out to mercury rise a while ago asking for stock update. Besides the update i got this reply. Meanwhile, please kindly allow us to introduce our company to you in brief. We are the OEM/ODM manufacturer of Umarex, MCS, NXWerks, Lancer Tactical… etc. We have our own factories in Taiwan and supply less-lethal weapons such as CO2 launchers, pepper balls launchers/pistols, rubber balls, powder balls, rubber steel balls, pepper balls, powder balls, …etc. in different calibers to above mentioned well-known brands. And “Mercury Rise” is our private brand of our factories.

Nice video again my friend Jon ❤🇨🇾👍🏻🔥

@@scottbeard9640 That would be awesome!

​@@AlternateArmsSDit would be a huge launcher LoL

@@Joreel Mabey, I’m loving where these are going though :)

I’m thinking we may see some Chrismas sales.. I’ll try to work a discount code for folks too.

@@chriswedgworth I knew someone would say that :) I’m gonna make some more :)

​@@AlternateArmsSDwell you did introduce us to him 😅

@@Joreel That’s true :)

My pleasure man! That was FUN :)