Видео

If its not out of prime, it could be a bad pump.

Yes. A job this size can be easily done in a day.

@@Metalhead0426 we are a multi craft crew of laborers, operators, carpenters, iron workers etc.. I figured out one of my laborers have experience in this. I feel like I could do it after watching your video. It’s not that complicated. It is a break room in use so we are going to do half at a time. My experienced laborer said it we would not have to worry about seeing a difference in the middle of the room where we have to stop and pick back up. Do you agree?

@@BillHickman-s3e There will be a line in the wax unless you do a really good job taping it off.

Good to hear! Never had the loss of water pressure. Doubt it got too hot. Id start with checking the jets on the spinner.

Not sure. I know the pressure went to zero after that with nothing coming out. Fired it up the next morning and working fine. Scared me a little due to only having it a few weeks. Great job on your videos by the way!!

700 psi and heat. That's as high as the warrior goes.

@@Metalhead0426 Can you use a machine with more psi without heat? Thanks in advance.

@@Joeshmowfromkokomo Yes. Heat isnt required to clean tile and grout. The tile cleaner does all of the work. You can throw in agitation beforehand just to be sure if its a dirty job.

@NotTooExtreme all the time. About 3 years ago I bought a truckmount and haven't looked back

@Metalhead0426 thank you for your reply. Will help me to decide.

@@NotTooExtreme Something about having to work on a machine that is new or less than a year old doesn't sit right with me. I bought the vortex first then the air water hog. Same issues so I moved on.

No just the vacuum. People use an auto scrubber to clean and top scrub. For these smaller jobs, it not needed.

@Metalhead0426 yeah I mostly see them use in big jobs like supermarket the auto scrubber

​@@Metalhead0426if I do not have the vacuum can I just wet mop and clean up the stripper like that?

@s2mar33 I've seen people do it. I don't recommend it. It's leaves the floor sticky. You're better off getting a squeegee and a regular wet dry vac.

@Metalhead0426 ok thank you

You can. Ive had to do it before in a pinch but ideally you want to use a high speed burnisher. The burnisher will do a much better job.

@williamd6967 I don't think it matters but you can look at your other breakers to see how they are in there

I think this job took around 6 hours

I actually have one.. ruclips.net/video/IvOKzCujI3E/видео.html

I buy the wax and stripper locally at Brady IFS. But I also see where you can buy it on Amazon if you cant find another distributer.

I got pretty much every thing from JonDon.

@@123MATEMATICAS123 I think $1600 would be too low. You need to make that at least in one day with you buying the materials and paying employees

@123MATEMATICAS123 I've only owned the Kohler so not sure what is the best. This motor is probably around 3k new

Probably you used weak stripper and didn't allow enough dwell time. I can cut thru 20 coats of floor finish with one strip application and one flood scrub .

If you allow the stripper solution to dry on the floor it makes the removal 10 times harder to remove. Stick with 300 foot areas at a time to prevent this

Maybe because your working by yourself at least have 2 people with u

The breaker should have been able to carry the load I put on it

No I haven't. I wanted to get away from ETMs all together. This machine has proven itself to be way more reliable even with this breakdown.

This machine weighs about 150 pounds but they do make machines half this size. It may not be prospector brand. I seen them at TCS in Georgia

@@Metalhead0426got ya I have the hp60 just arrived yesterday what you you use these machines for mostly? Are you strictly carpet cleaning?

Just cleaning. If I remember correctly it did remove some of the old sealer but it will not completely strip the floor

Thank you

No I'm sorry I haven't

Thanks. We were new to using the machine. We realized that we didnt have the blades all the way down

I normally have to wait 25 to 30 mins then about an hour after the last coat before I walk on it.

Zero issues

.60 per square feet is what I charge so this job was around $2700. 3 of us stripped it because I was busy at the time and needed to knock it out fast. 2 of us waxed it the next day. This job could have easily been done in one day.

Same process but a little slower and do smaller sections. I will try to include some smaller areas in my next video

I charge by the square footage. Price per square foot will depend on your area. It ranges from .60 to 2 dollars a sf. It comes down to how much people are willing to pay and how much profit you need to make.

Check the quick connects to make sure they are connected. Sometimes when new they can be a little harder to connect. Be sure to connect the solution line before you turn on the water pump.

I havent. On this job it wouldn't be worth the trouble as you would have to run 2-150ft extension cords from the generator outside to the machine. Its whole lot easier to just use their power.

Yes it has a built in circuit locator. I didnt know this when I made the video

I like this newer model way better than the last. Bigger tank, built in circuit locator, different pump, and its more quiet

Is Prospector brand better than the Sandia Sniper 500?

@@pedroandrade2103 I think they are the same machine with different branding

Thank you!