Nice clean installation. Can you control the temperature with that Little Giant very well for upholstery cleaning? Seem like it would get too hot for an upholstery tool. Any problems?
Hey Nathan! You have had your truck mount for about 6 months or more... What do you think of it? had any trouble with it? Could you do an update video on it and let us know how things have been going for you.?I would love to know.
Hey I just bought a warrior used for a startup just wondering if you had a startup procedure for it and could share it with me I don’t Al have any manuals with the truckmount thanks
Awesome! Check the oil first before start up, turn the key to on the "on" position for about 2 seconds til the fuel pump quits pumping, crank it. I ll let mine idle for about one minute then go full throttle then engage the water pump. Change oil every 50 hours. If you will contact TCS I'm sure they can email you a manual.
Hi Nathan, What made you decide to go Truck mount? Was your Water/ Air hog not cutting it anymore? What is the largest improvements you have noticed since you make the change? I appreciate your videos.
Thank you for watching! It was several reasons. I was getting bored with my business so I wanted to build another set up and change my image. I wanted more productivity, reliability, and a set up easier to use. I was going to build my own with another ETM. Just slowly work on it when I had the time but having one installed was more convenient and much better than what I would have done. It also came with a nice tax deduction. Mytee makes good machines but lets face it, they are cheap made. The improvements I have noticed is faster dry times, better results, more productivity, and less fatigue (when I got use to the increased vacuum).
I’ve been eyeing these machines for awhile . It’s a toss up between this or an El Diablo . Been running the vortex for the last few years but going back to a truck mount setup .How you like this so far man ?
Its a good machine. I believe I have about 400 hours on it now. It blows ETMs out of the water. The only trouble with it I had was the solution line that came with it was cheap quality and had to be replaced. And also the Little Giant water heater started leaking. It's going to a local shop to be repaired Thursday.
@@Metalhead0426 Thanks for the info man . They look like good machines , 100% agree etm’s are good but they will never be a truck mount. That’s the only thing that I am worried about is the water heaters they work great but always have issues with the little giant heaters .
@@thesteammaster2737no problem! I will do a 1 year review vid as soon as I get it out of the shop and cover the the issues and changes that I had to make.
@@Metalhead0426 Mitchell, what are you running? Nate, thanks for the video. For today's gas/propane prices that's about right...you still keep and operate Mytee's for backup? Nice purchase btw! When you go new you control quality and that's a simple setup running an industrial engine/vac pump no HX to conflict cfm. I'm currently with various Mytee's I think with 60% generator load it uses 3/4 gallon/hr. For TM goals I was looking at TCS or HydraMaster's value line, "Diamond" sold down in FLA.
Nice clean installation. Can you control the temperature with that Little Giant very well for upholstery cleaning? Seem like it would get too hot for an upholstery tool. Any problems?
Thanks. The temperature isn't adjustable but I haven't had any issues with it getting too hot
I figure it costs about $5 an hour to run at todays prices. not including maintenance. What is your cost?
Hey Nathan! You have had your truck mount for about 6 months or more... What do you think of it? had any trouble with it? Could you do an update video on it and let us know how things have been going for you.?I would love to know.
Its still running like new. I will post a vid soon
Hey I just bought a warrior used for a startup just wondering if you had a startup procedure for it and could share it with me I don’t Al have any manuals with the truckmount thanks
Awesome! Check the oil first before start up, turn the key to on the "on" position for about 2 seconds til the fuel pump quits pumping, crank it. I ll let mine idle for about one minute then go full throttle then engage the water pump. Change oil every 50 hours. If you will contact TCS I'm sure they can email you a manual.
Hi Nathan, What made you decide to go Truck mount? Was your Water/ Air hog not cutting it anymore? What is the largest improvements you have noticed since you make the change? I appreciate your videos.
Thank you for watching! It was several reasons. I was getting bored with my business so I wanted to build another set up and change my image. I wanted more productivity, reliability, and a set up easier to use. I was going to build my own with another ETM. Just slowly work on it when I had the time but having one installed was more convenient and much better than what I would have done.
It also came with a nice tax deduction.
Mytee makes good machines but lets face it, they are cheap made.
The improvements I have noticed is faster dry times, better results, more productivity, and less fatigue (when I got use to the increased vacuum).
I’ve been eyeing these machines for awhile . It’s a toss up between this or an El Diablo . Been running the vortex for the last few years but going back to a truck mount setup .How you like this so far man ?
Its a good machine. I believe I have about 400 hours on it now. It blows ETMs out of the water. The only trouble with it I had was the solution line that came with it was cheap quality and had to be replaced. And also the Little Giant water heater started leaking. It's going to a local shop to be repaired Thursday.
@@Metalhead0426 Thanks for the info man . They look like good machines , 100% agree etm’s are good but they will never be a truck mount. That’s the only thing that I am worried about is the water heaters they work great but always have issues with the little giant heaters .
@@thesteammaster2737no problem! I will do a 1 year review vid as soon as I get it out of the shop and cover the the issues and changes that I had to make.
@@Metalhead0426 sounds good brother
I have the Mytee Vortex also, but you know you can easily add 2 more LX vac motors to it and be able to run 4 LX's vs running just 2.
Tcs machines suck sir. You got owner who dont care and chen is past his prime. Propane sucks and warrior is bullshit
What are you running?
@@Metalhead0426 Mitchell, what are you running? Nate, thanks for the video.
For today's gas/propane prices that's about right...you still keep and operate Mytee's for backup?
Nice purchase btw! When you go new you control quality and that's a simple setup running an industrial engine/vac pump no HX to conflict cfm.
I'm currently with various Mytee's I think with 60% generator load it uses 3/4 gallon/hr. For TM goals I was looking at TCS or HydraMaster's value line, "Diamond" sold down in FLA.
@@Metalhead0426
Also what made you decide TCS? Thx
@@runzization Thank you! Yes I still have both of the etms as a back up. Actually Im using the Vortex in my rug shop.
@@runzization I went with them because they are simple machines. easy to work on and with in my budget.