Видео

Really? Crazy. Times have changed.

@bluepstu9009 im beyond excited but I think with all the new features they spiked in wait time because all the orders are made in house

@@jethroise6245 Yeah. Right after i received mine, they announced the bull barrel and prickly grip. Just my luck. :)

From Kooks website.

@ is it possible if you could send me the link.

@@jixerbeats384 kooksheaders.com/

Thank you sir. We don't do the CC here too often unless necessary.

I don't think you will make a wrong decision but I would go with the Plat. It just has more of that 1911/2011 feel and you just can't go wrong with something that takes Glock style mags. However, if you go that route, you will have a little bit of a wait time for the build.

@bluepstu9009 Thanks mate, I'm down here in Oz where it's hard to get things to try and it's exxy. The DWX OR is available now for $4.6k AUD and the Platypus may be available in a yr for 1k less. I think I might wait out for the Platy.

@@mps9649 Gotcha. Good luck to you!

I enjoy them both but I believe the Apache is going to be the one that I really put my time and effort into.

Like most things I order, the options improve right after I received mine. :) I def would have chosen the bull barrel and more aggressive grip. It just wasn't an option when I built mine.

@@bluepstu9009okay that makes sense, I honestly hate when stuff like that happens.

I got the Kooks 1 7/8 long tube headers and the Kooks x-pipe. I kept the stock exhaust. Hope this helps.

It is a Nitrofin made by shooting sports innovations. It will need a little modification. I had to grind off the tab on the back side of it so the magazine would fit. Has been running great. No problems whatsoever.

Because they use an Atlas plate, you have to order special screws from Atlas that they have made specifically for Holosun optics to work with their plate.

Def easy enough to grip. Wouldn't hesitate to get the chain link if you like that look best.

Ha. I gotcha. I appendix carry a lot and these are both great options. However, I am really liking the X Macro Comp now. It really fits in the hand so well. Love the capacity on such a slim firearm.

Glad you are liking the DS9. The XC is great but I couldn't see paying $1,500 more for it over the DS9.

@@bluepstu9009 No, loving it..! Lol...😎

Ha.! Very nice way to put it!

Thank you sir. That was me. :)

@@bluepstu9009 Hell yeah..! What will be the next 2011/DS pistol you will review? 😎

@@Thomas-vt7cz Don't know. Not a DS but may do a comparison on the CR920X vs the XMacro Comp.

Titanium

Unless I drop it on accident, we will never find out. :)

I def don't think that people are getting them in the proper order of when they put in their order. I did get mine from Kovert, I placed my order in Feb and got it mid June. The gun is great. Trigger should have been better. That was an easy fix. I got it down to 2lbs or a little under. I think some of their guns were put together by gunsmiths who knew how to tune guns and some were put together by people who just knew how to put a gun together. Once they saw the gun would test fire, they shipped it off. I do believe you will enjoy it. (Even if it were to have some kinks that need addressing.) From my videos, you can see that I have owned guns at this price point and higher but I believe this will be my favorite, if it continues it's reliability.

@bluepstu9009 That's exactly what I'm thinking is going on. They posted to higher more gun smiths. Unfortunately this isn't my first 2011, I also own some expensive ones. So my standards are higher and I do expect to get what was advertised and I paid for. This is also why I'm not pressuring to get it as I've waited almost 2 years for a 2011 🤣

I believe I had the 1 7/8 long tube stainless headers and the catted xpipe. You would just go to Kooks website and see the one that fits your year. I used the stock exhaust of the C7. Hope this helps.

@@tomharper8351 I definitely would not hesitate if I were you. It seems like the few that have had issues are the ones who are doing the most posting. You just don’t hear too many people post up the good things. They have made about 500 so farand I’ve not heard of more than 10 people having an issue. The one issue I had was the chamber was a little too tight so I had it reamed out a little bit. Have now gone about 900 flawless rounds since I had that done.

I'll be honest with you , ever since getting the Watchtower Apache, the MPA has been put to the side and it will be a backup. It has held up well and I have no complaints. I just wanted a gun with a comp and the grip is a little smaller on the Apache. It fits so well in my hand. I am really liking it.

Was very pleased. Finished 4th overall in pistol and 1st in open for the whole match. This was even counting that I had 10 seconds in penalties. (Didn't shoot at one target and I hit a no shoot.)

@@bluepstu9009 Good damn job bruh! When will we see a table top review on something nice with better detailed view??? 😎

@@Thomas-vt7cz Thank you sir. Might need to pick up something soon. :)

@@bluepstu9009 All right that's what I'm talking about..! 😎

You do lose the option to cut them off. (They are always open) It doesn't matter to me, as I kept them open at all times with each vette I have owned.

@@bluepstu9009 did the kit include simulators? I just ordered this unit. Could you please make a in cabin video driving around? Right now my Z51 is insanely quiet. I can’t hear a damn thing except for the fuel injectors ticking behind me lol

@@jass7981 You have to buy simulators separate. Here is a little vid that I did from the inside. ruclips.net/video/KEdMuAWprgs/видео.html

Probably the easiest way to tell by looking was the old grips look like the had little indents all over them. They looked like golf ball dimples. The new grips are much more solid and almost have tiny little cube or triangle shapes around them. Hope this helps.

To be honest with you , I have the commander size and would be fine with it. It does not feel that heavy. I have not had any experience with the full size.

Yes sir. That is the one. I have a local guy who is trying to mix colors together to make it match the bronze type color of the other pieces. If he gets it to match well. I will post up some pic/vids.

Yes please

Please do share the info on the color. I have this as well and have found the safeties are digging into my hand to the point of me not wanting to keep it. I did reach out to watchtower and I’m sending it to them. So far they’ve been great about wanting to take care of the pistol. I honestly think it’s a design thing. The ambI side angles down at the back and is digging in as well as the bottom corner is sharp. I want to swap for atlas safeties, but the color on this thing is beautiful. I don’t want to lose it…hoping watchtower can smooth them out for me, but not sure if they’re gonna send me any that are much better…anyway, if you end up getting a color match I would love to send some parts to get them coated…my trigger is gritty also and not any lighter than my P. P is MUCH smoother. Thanks 👍

@@shane2973 As soon as i find out, I will post up. Are you also on the Watchtower Enthusiast page on facebook?

Thank you sir. I got it from Shooting sports innovations. They actually have a picture of my gun on their site. You will order one for the 2011. They will tell you which one to get for the Plat and what kind of modifying you will need to do to get it to work. You actually have to grind off the tab on the back of it to get the magazines to seat. Hope this helps. Thanks for subscribing!

I do love my DS9 but the XC is flatter with less recoil.

I love both but the Apache is flatter and when i am practicing the double taps with speed are def tighter than the DS9. I would like to try a DS9 with barrel porting.

@@bluepstu9009 One thing I've learned and that is Physics varies among humans..! 😎

My ds9 is ported, and it's a dream to shoot!

Gotcha. Don't think you can go wrong with any or the three.

I will def try that. Thanks for the feedback. That is what I need to hear.

Your 100% correct 👍

Nitro fin by shooting sports innovations.

Maybe when I first got it but not now. :)

No sir

The slide has ports but the barrel doesn't.

Don't know. Belongs to a friend. To each his own.

It really is very simple. I have put some loctite on various parts so i don't want to break it down again. However, here is a link to a video of both on another 2011 that I used in the past. Hope this helps. ruclips.net/video/J4Y0I-phMY4/видео.html

@@bluepstu9009 Thanks

@@bluepstu9009 One more question pls., how do I remove or uninstall the magwell? I'm not sure if it's a screw or a pin.

@@BingV-vj1nc Not a problem. You push the pin in from the left side to the right. Use a punch tool or something. Let me know if you need anything else.

@@bluepstu9009Thank you very much.. I'm going to try to install the overtravel screw. It came without one

Just a heads up that if you contact Watchtower , they will replace and give you a new grip. In regards to the spent casing, I guarantee it is the extractor. This is an easy fix that you can take care of.

@@bluepstu9009 How?

@@rockie071 If you are talking the extractor, it just has to be removed and bent a little. Depending on if it is too tight or too loose depends on which way you need to bend it. Here is a link for how Atlas gunworks. They have a few videos on it. ruclips.net/video/COv5BtKxQMI/видео.html