Видео

Can't see the main thing you're doing.

Hmm? I was waiting to see if you replaced the orifice tube or the whole line with the orifice tube. But it doesn't say.

You’re a savior

THANK YOU!!!

How much does it cost to talk to a mechanic? If I download that I know nothing’s free would you answer me?

Good job sir!!

Hi. The motor will have 10 or 12 gage wire on the block but you can put your ground in any boot hole you wish. I used the bolt for the alltnater so it is dearly grounded to the bat. I put a long bolt throw my bat turm along with the cheesy stereo and body ground. It is a grate thing to do . I'm glad I did

Would this scanner also work with the 62te to clear P1745

This video sure saved me a lot of grief, straight to the point without a lot of extra talking.

do u have the dorman number? the 2nd pack, I bought the 1st already lol I couldn't make it out from the video, mine broke today but mines a solara

On mine the grommet was bad, simple fix.

Thankyou for this video,very helpful

What about a 2008 Saturn Vue xr

Thanks fer information.

Thank you for posting this! I was able to change it myself with no real problems. Had to flip upside down in the passenger seat to reach one of the screws.

Your video helped me make quick work of my blower motor replacement. Thank you!

Thanks for this informative video. Would you please leave a link so I can purchase this scanner? Thanks

Broke mine using this method, the plastic can’t withstand that type of force

I believe the charcoal canister can be accessed by removing the driver's rear wheel and wheel well liner. It makes this job way easier.

yes that’s the part i have now can you make a video on how the fuck to put it in😅

You’re a lifesaver !! First car repair I did myself 😊🎉

You mentioned a cheaper alternative to this scanner that would reset the VLP counters. Which model Foxwell were you referring to?

I am having that same problem

Thank you!!!! I would have broke something had I not thought of RUclips. 😅

Someone just replaced the little plastic broken stopper on my brake switched and charge me $94. I’m just wondering if I was way overcharged

Someone just replaced the little plastic broken stopper on my brake switched and charge me $94. I’m just wondering if I was way overcharged

Yes, they shouldn't make a wiper blade With "stealth" fasteners or covers that require you to take it to a dealer for replacement because you can't figure out how it works....

What diff oil brand is best btw?

how are they performing roughly 4 years later?

In a pinch I used those little hard felt Furniture pads will also work you can get them at the Dollar Tree and you just put it on there with the stickiness on there and they'll hold on that's if you can't find that part right away emergency type

I have a 2005 Dakota. Which side is the return?

Super helpful!

Thank you I felt stupid as fuck with this 30 min struggle til I looked at your video

I have a 2003 TL-Type S. Noticed the brake lights were on after getting the car back from getting new tires. I originally thought the Brake Light Switch was burned out. Looked at the floor board and found the remains of the Brake pedal accelerator stop pad. Went to Auto Zone and picked up the part below and now it's working. BY THE WAY, if anyone has a 2003 TL-S taking the actual Brake Light Switch out of the car is not as simple as all the videos I've seen where you turn it counter clockwise and it pops out. Still not sure how to get it out but it took a lot of force and a pair of pliers just to turn the switch. That's when I noticed the aforementioned pad on the floorboard.

I have the same scanner and same truck but my special functions do not show vlp counter anything

Engine light was still on cant tell if it actually worked

I have same issue break light on but when ever brake light get on while driving my accelerator start going down then I have to release accelerator and press again and it work but brake light doesn't go away it keep coming back, I hope it's same issue for me

That is amazing. The mod the truck needed without compromising any saftey.

great job , just looked into my audi a6 ,, same problem , all leaking out , joint good no cracks and that little square hole in the side of the pump leaking out ,, i blew into it and plugged up the exit pipe an heard it blowing out that square cutout ,, pumps bad you say ,,OK, that just saved me pulling the whole reservoire out which is a nightmare job , Thanks mate **

Thank you.

Super helpful I was about to break the damn thing haha thanks for the help

my bulb literally got stuck inside the tail light and I cant get it out bc my finger and bulb dont fit in that hole at the same time

Friend some suggestion my ac doesn't turn on, I've already checked fuses and everything ok, but it doesn't turn on the selectors or anything

Amigo alguna sugerencia mi ac no enciende, ya revisé fusibles y todo ok, pero no enciende los selectores ni nada

Thank you for the video! If your waiting on parts to come in and you have a 3d printer... it will get you by. But I would put a rubber one in there asap.

I saw that same little rubber pointy thing on the floor mat

Thanks for fucking nothing

Just commenting to let you know I saved $550 because of this video and was able to fix my AC with this video! Thank you!!!

Thank you if you show us how to replacement because the people they have to go on you tube they don’t have much knowledge about cars.

Did you have problems pumping gas?