Видео

Hi Glad you like what you see, make sure you subscribe so you dont miss out on any future video`s of mine. Regards Deryck

@@DeryckThompsonChasingtheDream absolutely, one step ahead of ya !!!haaha

It still won't work though.

It seems to just lock up straight away! Dead short?

Hi Are you using a VFD DRIVE to power your motor. The LG is 3 phase so you need a single phase to a 3 phase VFD Drive. hope this helps.

@@DeryckThompsonChasingtheDream no I am not using a “VFD drive” I have just been testing with DC regulated power supply & a 12 volt battery separately & trying with a bridge rectifier but still full cogging? Why do I need to use a VFD? Or can I get around this another way. Thank you very much for your help. Still locking up every time

@@luketaylor1621 The Motors like these are 3 phase you cannot run them on a single phase input. basically you have 3 motors in one and the VFD powers each motor on and off at the exact time to make the motor turn. have a look on youtube there are plenty of examples. there are also examples on you tube how to rewire the motor to run on 12 volts too. I learned how to run these motors on you tube, all the info is there that explains all this Regards Deryck

Hi Thankyou for your question. I am still still carrying out test to see if I am able to create over unity. please subscribe so you will be notified about any future video`s of mine. Regards Deryck

Hi I dont have a 3d printer, I sourced all the parts from the internet and Ebay. Took me ages to find the right parts, I improvised alot too. I build all my ideas from parts I find online. There is not many large gears out there made of plastic. I have since found a supplier on Ebay that sells various sized plastic spur gears. called HOSTAFORM. hope this helps with your build. Regards Deryck

Yes this helps alot.Thank you so much. But do you remember the OD of the big gear. And The OD of the smaller ones?

Hi. Thanks for the interest. On this occasion I was trying to demonstrate that using the same 14 volt battery I got two completely different results. By powering a motor to drive an axial flux generator did I generate more power out than I was putting in? because the Newman type motor was definitely faster than when I used the same battery direct to drive the Newman type motor. Over unity being the questions being asked by this presentation. What do you think? hope I made it clear for you regards Deryck. ps. dont forget to subscribe so you can receive any future videos on this.

@@DeryckThompsonChasingtheDream we probably have the same passion but we look at the problem from different angles. surely it does not produce more than it consumes. I'm not a fan of Newton but he happened to hit it off. If you develop your idea and identify all the forces involved in your device, you will notice that you must also involve kinetics, gravity, temperature... and so on. energy is born from movement...any movement. If you find the perfect imbalance that takes into account all the forces involved, you will get the device you dream of......the movement of the planet helps you a lot and in the end.....from there you will extract your surplus energy. Personally, I think that only a happy accident will help you in your endeavor because the time required for the study is much longer than our average life time, so try. you invited me so nicely to subscribe to your channel that obviously I do, at least to help you. success

@@DeryckThompsonChasingtheDream what you're doing is commendable, but I think you're wasting important resources on something that will have a completely different purpose than what you expect. Please just look at the lever as the ultimate tool that allows you to do extraordinary things because absolutely everything that has been invented so far is based on this principle. always the most unexpected perspective on this principle gives birth to something spectacular. Theoretically, we have made several devices that apparently produce more than they consume. All respect the laws of physics, but I never had the curiosity to put them into practice, even though financially it would mean a very big reward. I love your passion and I evaluated your work financially only from what I saw in the video. you are investing a lot in a slightly wrong direction. Great ideas are incredibly simple. You complicate the device only after you have made it, to hide the idea.

​@@DeryckThompsonChasingtheDream hi. please try to use the washing machine motor u have as a load from that Newman motor to generate power. cant wait to see the result. thanks

I dont know is the answer to your question. Something I will have to take a look at. As you will see from nearly all of my video`s I dont use electrical circuits to operate my machines. most have mechanical timing which I find is very reliable and it allows me to increase and decrease the voltage without the fear of burning something out. I try and keep it basic so others can build them even if they have no knowledge of electrical circuitry. Hope you have subscribed to my channel Regards Deryck

@@DeryckThompsonChasingtheDream your channel is truly amazing keep up the good work. yes I scribed a long time ago I got it to work! radial pulse running radial pulse motor well the main is more like a transformer due to the fact that the copper in the drive and the copper in the gen never touch and there is more then20 times the amount of copper in the generator side then the drive side. therefore, it appears as over unity, but this is not true when you factor in the amount of copper there are 1600 turns of 24-gauge wire for the drive with 8 transistors1 per 200 turn strand of 24 awg 200x8=1600. Now there are 38,865 turns single strand in the generator side of pulse motor various gauges there is 26, 32 and 20 gauge and 4 soft iron cores generated a current max of 6.05 amps/350dc volts that is1800/2000w at 5dc volts in and 2.5 amps in

Clearly doesn't apply here

Hi Every 180 deg it makes contact by using this method it does increase the speed accordingly. Regards Deryck

@@DeryckThompsonChasingtheDream cool

Hi, I pushed each 4 pole section onto the shaft and this allowed me to twist them into alignment ,then I super glued to hold in place. Hope this makes sense, regards Deryck

Hi , Thank you for your kind comment, Glad you like what you see. Regards Deryck

Hi Yes it was, But fitting them inside each casing of 4 first and then placing them on the shaft allowed me to do that quite easily in the end. Regards Deryck

Just free wheeling at the moment, I was finding out the difference in power to the NM using the 14 volt battery for both methods. and as you can see using the axial motor made the NM spin 20 - 30 times faster. which can only mean that the Axial motor gives out more power than the battery, ?? more tests to follow to prove either way. Regards Deryck

@@DeryckThompsonChasingtheDream Since you have a bridge rectifier between the source and the NM, the power that would normally head back to the battery is blocked and utilized by the NM? I'm not sure but grounding the NM may slow it down about half speed but thats just an idea of a way to test it. It could be utilizing the BEMF from the axial rather than it just turning into heat

Thank you for your kind comments. Regarding a generator it is all about scale to create enough torque to drive the generator. bigger the better as Joe Newman found out. Regards Deryck

Hello my friend, Yes the speed was incredible on this occasion, I think it was the generator gives out a lot of volts but very little amps which is what Joe Newman was showing the world. seems to work above normal when powered like that. Regards Deryck

Hi Thanks for your comments, This is my first test and I intend testing this more with regards to the volts and amps used because it seems that I am producing more power through the axial flux generator so keep an eye on my channel for the results, Subscribe if you havent already and you will be informed of my future videos. Regards Deryck.

Thankyou, The volts and amps used will be in the next video so keep looking out for it. Please subscribe if havent done so already. Regards Deryck

@@DeryckThompsonChasingtheDream i have ;) i make motors aswell, and got a few things coming up, i gonna wind a generator soon that should hopefully have 220v and 13amps out, 150wires wound in parallel to get the amp, but my torque motor isnt as big as yours it probably won't be enough to overcome the drag.

Thanks for your support and interest in my ideas. Regards Deryck

Thanks for the positive comments. much appreciated. Regards Deryck

Hi Richard . Yes a little noisey , This was the best way to build this idea with parts that were available at the time but it gets the idea out there for all to see and experiment with if they so wish. make sure you are subscribed so you dont miss any of my future video`s that I put out. Regards Deryck.

Hi Thank you for the interest, Glad to see that you are following my journey too. Regards Deryck

Hi Thanks for the interest. I used 0.6mm wire on the coil so it didnt generate too much amps, I wanted to generate high volts with the back EMF. Hope this helps. dont forget to subscribe so you dont miss any future video`s of mine. plenty to see and enjoy. Regards Deryck

Hi, Thank you for your positive comments . I agree that there are quite a few options open with this set up. it will be interesting to see which turns out to be the best. Dont forget to subscribe so you dont miss out on any new video`s of mine. Regards Deryck

Hi Jussi. Yes that`s correct but more importantly I can power the Power inverter which runs the whole thing, making it self running. and in part 2 you will see that I actually do that. Hope you have subscribed so you don`t miss out on any future video`s that I upload to youtube. Regards Deryck

Thankyou for your positive comments. make sure you subscribe so you dont miss any future video`s that I post up on youtube. Regards Deryck

Hi. Yes Joe used massive coils but he also had very big magnets to go with them. I tried to scale it best I could to see if I got similar results, Shows a lot of promise. I made up the rotor with as much useable magnetic power as I could concentrate on the wire coils. Lots to experiment with here . Hope you have subscribed so you dont miss out on any new video`s I post up on youtube. regards Deryck

Thankyou for your positive comments. make sure you subscribe so you dont miss any future video`s that I post up on youtube. Regards Deryck

Hi James , Thanks for the positive comments . Hope you have subscribed so you dont miss out on any future video`s of mine. Regards Deryck

Thank you Glad you like it.

Hi. Thankyou for your positive comments , Nice to hear from someone who can see the potential in this generator. In part 2 you will see that I run the whole unit off one battery making it a closed loop system, I only ran it for a few minutes for the video on you tube but it seemed to work ok. but I will be testing it with long running times. I am also going to change the PWM units to MPPT units which will maximise all of the volts and amps that are being generated. Still working out how to change batteries over (If needed.) Once I have run it using the MPPT units I will post another video showing the results, good or bad. Its all about trying out different ideas. anyway thanks again . make sure you have subscribed so you dont miss any new videos of mine. Regards Deryck

Great work my friend ..go ahead.

Thank you for taking interest in my video`s and idea`s Regards Deryck

Hi Thanks for the positive comment, glad you liked the video. Lots more experimenting to carry out. Hope you have subscribed so you dont miss out on all my future video`s. Regards Deryck

Thankyou your positive comments they are much appreciated. Regards Deryck

Thanks for the comment, glad it has triggered a few ideas for you. Thats what all the sharing is for. regards Deryck

Hi Yes that is something that I am considering not sure if it will work or not but one can can only try it and see. its all about exploring an idea. regards Deryck

Thank you for your positive comment.

Hi Yes its an idea I am looking at, I think that more wire you use the greater the power but the only draw back is the amps that it uses. but I am sure it will lead to other things, I have made the left hand rotor spin twice as fast just by positioning the coil in a more forward position. lots of ideas to try. so please subscribe if you havent done already so you dont miss any future videos of mine. regards Deryck

Hi Glad that you enjoyed the video, hope to see your motor build one day. have you subscribed ? then you wont miss any future videos I post on youtube. regards Deryck

Hi deryck, yes I am subscribed, thankyou for your reply and I always look forward to your new videos.

Thanks for your comment, I wanted to have as much magnetic force that I could generate and as you can see the motor is very powerfull. Its possible to connect a generator to this motor and generate spare electrical power to feed back to its supply if its possible. I am experimenting with a few idea`s and will be posting up the results soon. have you subscribed or left a like so you get notified of my future video uploads. all the best Deryck

@@DeryckThompsonChasingtheDream You should look into where John Bedini took the Newman motor with his "window motor" design with the bedini-cole solidstate switching arrangmet. Also Bedini was able to get some extra energy out of one of his Newman motor replication with the coil center tapped with an avramenko plug coming off of it. Best of Luck! I'll hit the like and subscribe to see where you go with this!

@@DavyOneness Thanks much appreciated.

Hi Thanks for your comments and ideas, I agree its not free energy thats not what I was trying to achieve. But I am pleased that it gave you some ideas to expand on this idea. Thats what I try to do is to make it interesting for people like your self and maybe you will build and show your ideas for all to see. Thanks for viewing hope you have subscribed so you dont miss any new videos. Regards Deryck

yes please I have always wondered what made his commutator different from others.

Hi This was one of my first attempts and still learning lol.

@@DeryckThompsonChasingtheDream i put the vid up