OVER UNITY, NEWMAN TYPE GENERATOR.

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024
  • Hi and welcome to another of my video`s.
    This video is of my Newman style motor Generator with a single coil with the addition of a EMF Collection set up. It is a motor generator because once powered it runs as a motor but at the same time it is charging up capcitors with a large voltage charge going into capacitors, through bridge rectifiers 230 volt bulbs and a 500 analogue voltmeter to show the large amount of DC volts that it is being generated with only a small amount of AC Volts input.
    You will see that I can light up both the 230 volt light bulbs and still raise the voltage to its maximum as displayed on the analogue voltmeter. It would go even higher but the set up wont show this in detail. There is a lot more power & voltage to come out of this set up but I wanted to keep you updated on how far I have got towards Over unity / free energy as many might say. I have an input showing wattage power being consumed, when powering the 230 AC volt variac that has 300 AC volts available .
    This AC power by the variac is put through a bridge rectifiers to change the voltage to DC.Voltage
    It then goes into the Newman generator and comes out the other side with a voltage that is at least 5 times as high as the voltage that is fed into it.
    There is a sweet spot when a certain voltage is reached that seems to enhance the power output even more, making the voltage run away with itself if It isn`t controlled quickly with the Variac or turning on and off the 230 volt light bulbs that is being powered. The power can be held steady unlike many electrical machines that depend on a large back spike of voltage as its reclaimed power source.
    The power is generated quickly and loads the 400 volt capacitors stableising the voltage which power the 230 volt bulbs.
    I BELIEVE THAT I AM CREATING OVER UNITY and this video seems to show that. What do you think.?
    I hope you have enjoyed my latest video on this subject if so Please Subscribe which will help me get to total of at least a 1000 to get "RUclips" to monetize my account so I can raise funds to build more ideas like this and other projects that I have ongoing at the moment.
    PLEASE. Leave a like, a thumbs up and Subscribe, if you want to see what other ideas I have coming up.
    And finally Many thanks again for taking the time drop in and watch this video. I hope its given you a few ideas too
    Have a great day and keep safe.
    Regards Deryck

Комментарии • 25

  • @strawman9410
    @strawman9410 Год назад +1

    Change the veriac with a battery and inverter and if you can charge the battery while powering lights, it will give you the answer if is overunity

  • @kgsalvage6306
    @kgsalvage6306 Год назад

    I agree that changing to incandescent bulbs and putting a power meter to the output load would make seeing whether you have overunity a lot easier. Have you tried a two coil configuration like a regular Newman motor?

  • @Machiuka
    @Machiuka Год назад +2

    Very nice setup. A lot of work involved I suppose. It is not overunity though. Your load is of two LED bulbs of maybe 10W each. The consumption for these is of max.100W. Maybe 80Watts are lost in the system (variac, Newman motor etc). Volts without amps are of no significance from the energy point of view. Even with 3V you could generate thousands of volts, but the current is very low. To see that you may change the LEDs with incandescent bulbs and you'll get my point. Anyway congrats for your work and thank you for sharing.

    • @DeryckThompsonChasingtheDream
      @DeryckThompsonChasingtheDream  Год назад

      Thank you for your comments.

    • @GG-od2tr
      @GG-od2tr 11 месяцев назад

      Newman showed incandesants nothing is ever enough is it. Consider another coil possible bifilliar. Consider flywheel. The torque will overcome the load. It is overunity. The only thing it is also is ineffecicent. Add those things mentioned.

  • @gstorm1491
    @gstorm1491 Год назад

    Bravo Deryk! I can't tell you if you are in over unity but as Machiuka says in the comments, changing your led lights to incandescent bulbs we could really see the efficiency of your system.Congratulations for your work!

    • @DeryckThompsonChasingtheDream
      @DeryckThompsonChasingtheDream  Год назад

      Hi Gstorm Thanks for your comments on my latest project it is much appreciated. I am quite new to Electrical equipment ect and am trying to learn as I go along. I havent seen another set up like mine that produces as much voltage with out the need for complicated wiring circuitry and diodes, transister`s ect. I seem to have bypassed all this and still get a great result which I can and will improve upon in time, Thanks again for your interest. keep safe.

  • @Zanderman2000
    @Zanderman2000 Год назад +1

    Hello. You can multiply Voltage easily but at the same time you reduce amps. So overal wattage doesnt automaticly increase when you get more voltage out of system. Newman motor should be build with large coil that is fed with hv capasitors and dead batteries. You don't need much amps to run Newman motor. So when you hook conventional generator to Newman engine it should generate many times more amps than the motor consumes. Basicly you can get 20kv from the Spark of carpet or t-shirt. Voltage doesnt mean much in electric motor alone. You must always measure voltage and amps together to get any meaningful test result.

    • @DeryckThompsonChasingtheDream
      @DeryckThompsonChasingtheDream  Год назад +2

      Hi Mikko Thanks for your input, I agree what you say and understand Newmans Motor and how it works, In the video I am showing the watts / power used in my input supply of between 12 volts and 60 volts. The maximum watts /power shown was 100 watts in I believe which was driving my motor generator, and my Power out was lighting up two 230 volt bulbs equivilent to 160 watts and I was still raising the out put up to 500 volts while the bulbs were still lit up. I could have raised the power higher but my voltmeter only displays up to 500 volts. I would think that my power output far exceeds the power input. Dont you? I am still testing this idea.

    • @Zanderman2000
      @Zanderman2000 Год назад +3

      ​@@DeryckThompsonChasingtheDream If your measurements are correct then it is overunity in conventional sense. However in psysical sense it is not overunity even the Newman didn't claim that. We should leave the idea of overunity behind. We all know energy can't be created nor destroyed. There is no under or overunity in this universe. There is only energy, that is. In atomical level there is nothing created. For human level there is definately more energy available from the motor than it consumes. The motor just converts more usable atomic power to HUMAN usage than it consumes, but the power comes from the atoms so the energy is not created by thin air it is just pulled from the copper atoms and permanent magnet charges. This is hard to understand to many, but this motor is not overunity, it just has over conversion rate of usable energy. Total energy of this motor is much higher than we can really utilize. You could clumsily compare it to fire. You can start gigantic fire with small match. So does this motor start gigantic ALINGMENT of magnetic field with small spark of high voltage electricity. The aligment of these atoms makes the usable energy possible. The high voltage "pressurises" the copper atoms to form a emf around them and in result to push the permanent magnet away (or attracting it depending of the copper atom gyroscopic aligments). Atoms are gyroscopes and they either attract or repel depending on direction they spin. When there is lots of atoms aligned in same order they form a magnetic field. When there is atoms that are scattered like in a carpet or wood, and there is not current going through them, they can't repel or attract anything. You can create permanent magnet out of iron nail when you run current through it and align its atoms.

  • @mecaniclesofcostoboc4356
    @mecaniclesofcostoboc4356 Год назад

    The gain is just from backfm? No generator?

  • @espersnzacuestamorales4480
    @espersnzacuestamorales4480 Год назад +1

    💪🏻💪🏻💪🏻💪🏻👏🏻👏🏻👏🏻👏🏻

  • @daviddavids2884
    @daviddavids2884 Год назад +1

    fyi sorry, this is a typical case of ignorance driving 'research'.
    power is WATTS, Continuous.! watts equals volts x amps.
    power is not 'watts over time after being stored in a 'capacitor''. !
    output current cannot be Accurately measured while the output power
    is being used.! in other words, it is a Mistake to have any kind of
    'dummy load' - especially a high resistance load - in the output circuit.
    (a suggestion to use an incandescent lamp in the output circuit is,
    therefore, a Bad one.)
    you have a fairly accurate value for the amount of AC watts IN.
    and, that's IT.
    btw, energy is LOST, not gained, when a motor is made part of a
    power processing system.

  • @nixon6216
    @nixon6216 Год назад

    Just a thought, Could the collapsing field on each spike be converted to useable energy aswell. My understanding of this is in it's infancy so I apologies if I'm asking something stupid.

    • @nixon6216
      @nixon6216 Год назад

      I just realized It's a single coil, so i dont thing my question would be valid as it may not be switching like the others

    • @DeryckThompsonChasingtheDream
      @DeryckThompsonChasingtheDream  Год назад +1

      Hi Wesley F Your question is not a stupid one, I am creating magnetic coils with collapsing back spikes of 300 to 400 volts twice every rotation and am collecting this massive back emf and using it to power the light bulbs with power to spare as you can see on the volt meter. I am currently working on a way to reuse this back emf to power itself. Thats the aim anyway.
      I hope this makes things a little clearer for you. Thanks

    • @nixon6216
      @nixon6216 Год назад

      @@DeryckThompsonChasingtheDream is the capacitor a starter or a runner type?

    • @DeryckThompsonChasingtheDream
      @DeryckThompsonChasingtheDream  Год назад +1

      @@nixon6216 Hi I am using 3 x 400 volts x 800uf standard capacitors connected in parallel.

  •  Год назад

    Hello, sorry, but this power meter is not to trust too much. I have several of them in my lab, but I am rather using other power meters. Measuring wattage is not enough for calculation. You need to multiple wattage with power factor which you can reed from that power meter.

  • @TheWorldBelow360
    @TheWorldBelow360 Год назад

    Is that Watts going into the Variac? Cuz I think that’s what I’d like most to know…
    And to a lesser degree, can you plz tell your sounds effects dude to knock that shit off?

  • @Edmorbus
    @Edmorbus Год назад

    Can you share the circuit schematics how wired
    Thanks for sharing

  • @fidelcatsro6948
    @fidelcatsro6948 Год назад

    only real way to know is to power it from a battery and use the spike output to keep the drive battery charged

  • @HWandW
    @HWandW 2 месяца назад

    Both the power in and the power out need to be measured in watts; not just volts. We need watts in and watts out. Why? Because changing a low voltage to high voltage is just a party trick. High volts with low amps can equal low volts with high amps. Volts times Amps (amperage) equals watts; Watts measure how much work can be done. So is it over unity? It doesn't seem so. Get it to all work unplugged from the mains in a closed system that recharges itself and then upload that video. Does over-unity exist? Maybe, but energy from somewhere has to drive a generator to create electricity. We see the sun as a driver in solar, wind & water current in turbines, but we (RUclips viewers) don't know how to change another energy source to electricity. Well, we can learn about atomic reactors, but that's not easily doable in a home or home based lab. If microwave ovens can change electricity to microwaves then the reverse can be done. I would argue that it has already been done. The EM spectrum, in part or in whole, can be used as a driver. And your device maybe tapping into something like the EM spectrum. I trust Nikola Tesla when he said something like, "There's an untapped ether we [people generally] know no little about."

  • @joew5559
    @joew5559 Год назад

    😳