Видео

Hi mate. Not sure what's the problem in your car but I can tell you I've had this mod in my car for years now without any issue and my mate did the exact same on his aristo and never had any problems. I assume there's a problem with the wiring in your car because I've never heard about anyone else with the same problem before. 👍🏻

@@evosgarage assuming would make an A$$ out of you and me...there's no problem with my wiring I've been wiring cars for 10 years I'll chalk it up to it being a GS400 anf being slightly different...I followed the club lexus write up and have had no issues since.

I'm glad you managed to sort your problem. I don't know about the specifics for the gs400 as I've never owned one so I wouldn't be able to troubleshoot your problem in the youtube comment section without having the car in front of me, I've only worked on the gs300 and the aristo.

They are 20mm but there's still space, I'm sure 30mm will be fine and look even better

Cheers man I’ve ordered 25mm not sure I trust 30s might be to big on the fronts I’ll let you know how I get on dude keep up the good content man

No worries mate! Thanks for watching 🤜🏼 🤛🏼

True, it's all about finding the sweet spot!🤜🏼🤛🏼

No worries Finn! I'm glad it helped you!🤜🏼🤛🏼

That's sad man😪

No worries! Happy to help mate🤜🏼🤛🏼

Hi mate! Do it, it will probably fixed your problem! Thanks for watching 🤜🏼 🤛🏼

Good to hear you managed to solve your problem 😁🤜🏼🤛🏼

Go to the glass bed, you won't regret it!👍🏻

I've used low melting point solder wire, makes it easier to solder the components on the board.

I'm glad to hear that! 😁 I hope everything goes smooth for you!🤜🏼🤛🏼

Thanks for watching 😁

Man, I'm so happy to hear you got the car running property again😁🤜🏼🤛🏼

Hi mate! They don't have to be because if you notice all wheels have pockets machined in those areas to accommodate for this. 👍🏻 thanks for watching 🤜🏼 🤛🏼

Man, so happy to hear it worked for you too! Thanks for letting me know🤜🏼🤛🏼

I got it from Mercedes!🤜🏼🤛🏼

What I was printing in this video was some hiding covers for aftermarket camber plates for the bmw e36 suspension towers. Thanks for watching 🤜🏼🤛🏼

It won't rub bro! It's fine!👍🏻

It's a Walbro 255. I'll see if I can get you a link.

Something like this! www.ebay.co.uk/itm/125493987297?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8RQ_zxjPREa&sssrc=4429486&ssuid=kEaaQKCKR9C&var=&widget_ver=artemis&media=COPY

Thanks a lot! 🎉

Unfortunately I couldn't find that info so I just torqued it by hand until it felt like it wasn't going anywhere.👍🏻

@@evosgarage found it 28 pounds! 38nm

@BonoMoran nice one mate! Thank for sharing with us!🤜🏼🤛🏼

@@evosgarage question my clicking knob is just turning on top! For soft ad hard when I try to make it soft it doesn’t click!??

I'm almost 100% it should click for both sides!

Yeah the glass bed works very well with abs. I had no problems. You either got some weird abs mix or your acetone is not strong enough I would say. Wish all the best 👍🏻

Yeah, you can do that! I think it's probably going to work👌🏼👌🏼

@@evosgarage ok cool, ill give that a go

@xxxclusv let me know if it worked! In the meantime I'm going to ask one of my friends who converted his r32 to lhd to see if I can find what has he done with his mirrors!🤜🏼🤛🏼

oh that would be awesome! @@evosgarage

You can heat the glue around the speakers and rotate it to free up the tabs and it comes off, sometimes it doesn't work because the glue is super old and hardened, 2nd method is using a thin flathead screwdriver and gently pry the speaker off the tabs! It doesn't matter is you break the tabs imo as aftermarket speaker won't slot in there anyway. I hope this helps you man🤜🏼🤛🏼

Thanks for the quick reply ill give it ago🤞

@@scottireland6116 no worries mate👌🏼

Sorry, as far as I'm aware no problems with that so far!👌🏼

😂😂😂

Different versions of the E36 will have different configurations of the fuel pump assembly, on my case one port is open and the other is closed from factory. I've seen other models that used both ports on the top.

You don't have to replace it unless it's falling apart because it's only a plastic mesh. It only stops solid debris from going in the pump. You can clean it from inside out and it will be good as new, just put it back again. The main thing is it being clean!👍🏻

Glad you enjoyed it🤜🏼🤛🏼

No because we were already running like 20mm wheel spacers.

Seems to be a common issue, get wheel spacers. Lots of them on sites like pelican parts. I'm watching these vids trying to figure out if my std 550i rims will hit.

Hi! Unfortunately I haven't tried printing PETG yet! Maybe in the future!

I'm glad it helped you 🤜🏼🤛🏼👌🏼

Hi mate! I would suggest you get the codes scanned with a cheap Bluetooth obd2 reader. That's likely to point in the right direction and it might be something very simple to solve!👌🏼 It seems the ecu going into limp mode and there must be a good reason for it but it can be something simple as MAF sensor for example.

@@evosgarage ok thanks although i have a more pressing issue with it at min, it is stuck in nuetral wont go in reverse or park, sort of half goes into drive but not as far as normally lever should go but at least i can move it forwards, i have just bought a used lever and gear selector and 🤞 that will sort it

Hi quick update which may be of help to others in future, i replaced the gear shifter module with a second hand unit as three diff sources said it would not need programming on a2002car WRONG! A nightmare time with lots of issues (stuck in 1st, no reverse saying R when im driving!.stuck in 4th..and others!) Took it to a magic auto elec who took all the "brains" out of my old shifter and put them in the new one and it is now working fine after a week👍 now its pouring black smoke and loss of power though🙄 bloody vehicles eh😅

If I could choose I would prefer the 3.2 inline 6. The engine from the 320CDI.

@@evosgarage ok. But between the 270cdi and the 3.2l v6 petrol/gas?

@ramonbs6075 unless you live in dubai or the USA I would recommend the 270CDI as the 3.2 v6 is known to be veeeery thirsty😉

No, it was RWD!👍🏻

Yes it did

Thank you! 🤜🏼🤛🏼 I really appreciate it

Gracias hermano! 🤜🏼🤛🏼👌🏼

Before