Видео

Just scored the same one today for free from the original owner. Mines a 3000watt and the tank and carb on mine is different and i think mine has 7.5h engine. But same color same frame and it came with a cool cart it locks into so it dont vibrate around and u can unlock wheels when not using it and roll it around. Super cool video man. Old tools are the best

Are they squeaky? Mine are. Going to try weather stripping the metal on metal connections.

Thank you so much for this video!! Just saved me a trip to the mechanic!

I’m experiencing this same bullshit with a 2019 canyon and it sadly isn’t working.

Thanks foir sharing

What about if it’s push start?

Have the same Chipper but cannot find on the machine the model plate or decal. Assume it has gone by the wayside. Carb is the same as the one in the video. Do you have the part number for it or a replacement. Like your video.

Also how do I install one on a twin cylinder engine

So I’m guessing the spark plug makes power for it?

Worked for me, thank you so much!

This happened to me today on my John Deere D100. I was just going to put a new spark plug in and immediately noticed the old one was really hard to get out. I don't recall having a problem putting it in, but it's cross-threaded. I will try this since it's a problem getting my mower into a shop. I already forced a new one in and found it would not go all the way. I broke the first new plug I tried to force. I was surprised the mower even started and ran with the spark plug not all the way in there. I'll try this fix before I start it again.

Great video. I am new to plowing and just bought a Rampage II. I found the company's website to be lacking in detail. Specifically, how to hook up the plow to a custom mount instead of a receiver and also the fact that the main frame safety pin needs to be removed before use. I liked the wire routing through the bolt hole idea from your first video. I will probably use another bolt hole to store the main frame safety pin while in use since I don't need it for the receiver.

Is it alright to use TruFuel 50:1 premixed fuel for Ryobi 725re?

I've used five of these cheap amazon or ebay tachs and they all tested accurate against Faria Beede tachs. 3-4 loops tightly wrapped with zip tie works well.

I'm sorry, but this video is just to dark

Good to know for future reference! Thanks!

These things are not accurate.

You absolutely don’t need 4lo man

I know this video is old but what a waste. I would have saved machine spend 13.00 to have fixed. You could have sold to someone for cheap that really needed one. Going through fast food drive through is 13.00, just saying. I have the same machine had for 20 years runs great, only had to put in new primer ball and gas lines.

What did you charge for the tune up?

What’s the point of having a tachometer on a small engine you’re not racing it

I have 4175. Took apart and cleaned up due to fact that fuel line deterriated in tank. Same carb. I noticed there was a manual choke on it I never used

Great video. Was able to get these on my Canyon AT4 using it!

Thank you it worked!

Recently got mine for a 2021 Chevrolet Colorado ZR2 off of Facebook Market place. $180 and 35 mins of my time and I am as happy as ever! I rarely score a WIN with FB Market Place but I consider this being one!

What is the reason you put battery on tender the night before you start it in the spring? A lot of times it starts for me if i dont even use a temder. Doesnt the alternator charge battery back up anyhow?

Shoot...I came here to see the proper way to start it, and you didn't even do it. Good info, but wasted my time fast forwarding to only see it in a trailer.

Thank you for this helpful video.

Thank you for sharing this video you just saved me a heap of money and time!!!

Life saver thank you sir !

Are you using sometime after truck city pass and throw the snow in front of the driveway and snow get super hard to remove??? If you try let me know if that work ok thanks in advance

There are memes about that ONE guy on the internet that posts that ONE video that saves your ONE problem in that ONE situation. This this that video and I am that guy with that problem. THANK YOU

Nice

It is a big deal by not putting a sign on it. You blew the motor up and had to replace it. Now it's not working like you want it to with a new Harbor Freight engine. Moral to the story. First check for engine oil!😂🙈😎

Thanks man! Life saver info….

Thank you

Thanks for the video! The instructions I got didn’t indicate (or I missed it) to go to the negative terminal for the wireless remote transponder.

I always wondered why people don’t unplug the connector first from the light while still in the housing so you can use one hand on that connector instead of pulling bulb out first, you’d have more leverage. Thanks for posting, you gave me information I didn’t have before. Great video Cheers!!

I too have a 2020 Colorado. Goes together pretty straight forward. I was curious where you mounted the electrical control box. Was it just left hanging in the engine compartment?

Perfect video, I have a ZR2, same frame fastening points but with metal skid plate underneath. I'll see what happens when I get underneath.

bro oh my goodness ur an actual life saver thank you so much u do not know how grateful i am for this damn video

did they do anything for your blade being marked up? just bought mine from costco on sale and put it together and it has some very deep scratches in the blade. I mean the metal has huge gouges out of it from being rubbed constantly. About 4 spots right in the middle. Curious if they did anything for you? My wireless winch controller also doesnt work unless i put the wireless controller touching the control box.

i have an older snowbear plow which is similar to what you have. new ones use that front receiver mount, mine uses a different bracket with two mounting points. used it on a couple vehicles, latest one being an 07 wrangler which i sold, keeping the plow but i also have a plow for my tractor which is what i currently use.

Thank you for this video! It will save me a lot of time as I work to get mine maintained and running. You're Awesome!

Do you think it REALLY cuts down on your total time out clearing the drive with a snowblower? I mean if you have to attach and then unattach that blade rig every time it snows (assuming this is also your commuter vehicle), then I don't know if this would be worth it. I have a 2021 Z71 that I bought this past year and was considering a light blade for it (live in the midwest, harsh winters, decent amount of snow) but I really don't need it for my house or my neighbors because I already blade with my John Deere select series lawn mower and it works great. I'd really want a blade to go blade out around town for my various friends and family members. I don't think I'm going to get one but was half curious if anyone had done any blading with their z71. I will say the thought of blading in a warm cab with my steering wheel and heated seats sounds so much nicer then being bundled up on the John Deere freezing my face off lol. Thanks for the video!

THANK YOU

Why rpms not steady? They going up and down

DIAGNOSTIC PRO TIP: Wrap 5 turns around a round metal bar 1/4" diameter, 1 inch long. Wrap that with duct tape to keep wire on the bar, and not unwinding like the Graz attempt. Zip tie it to a spark plug wire and start your engine. When done adjusting engine RPM, cut zip ties and move to the other cylinder, if necessary. You have just created an inductive bar. It steals the pulse from the plug wire, and applies it to your metal bar, where the device accurately detects and registers it. I cannot tell you the device is accurate, but you just removed a lot of the variables. -- The Great Nicolas Tesla revealed these secrets 100 years ago. -- North Central Florida -- 9.10.2023

3600 rpm is usually the redline for single cylinder lawnmower type engines.

This worked - thanks tons for this