Видео

mine only comes on after a launch when my wheels spin (550i xdrive) and after i dismiss it i don’t get the warning till my next launch. any idea what it could be?

Did you need to replace the wire as well or was that just over kill for the video? Im trying to decide if i should buy just the sensor or both wire and sensor.

What grit sandpaper?

Hey did you reuse the washer from the OEM mounts when torquing down the upper nuts? The rogue ones didn’t come with one and now that I’ve completed the job I realized perhaps I should have used a washer. Edit: after watching another video I realized these are flanged nuts and the hole is small so I should be good. Edit2: also, for anyone reading this, it'd be a good idea to get a ratcheting 13mm wrench to do the upper mount bolts. that heat shield can only be moved an inch or two back not giving you much space to turn a wrench; and you cant get a socket on there either.

Have the same issue on my 440 thanks for making this video!

Thanks for making this video, I had the same error on my f80 and for some reason I swear it was the wheel speed sensor. Installed it and got that chassis warning and even did a edc start up in ISTA. And now that I watched your video and you said vertical wheel speed sensor and it’s actually that sensor on the strut. I just went back to a screen shot and it said vertical so now I feel dumb and relived to finally know what to replace lol.

I get a thump everytime i press the throttle. I assume its the bushings

By any chance did you have the "clunk" before doing this and did this help? The clunk can also be diff bushing related so if you did that job did it remove the clunk?

Im going to do this soon on my f31 n55, oil priming is such a strange topic ... 50% say myst do then 50% say no its fine it dont need 🤔 Joys of opinions

Can you use on small parts of the seat's?

I got my car scanned and left sensor is faulty, I replaced left sensor but not right sensor. Im still getting error.

I feel like you left out a ton of bolts that need to be bought, in the part numbers area. Diff bolts? V brace bolts that are said thats needed to be replaced. Id just like a straight forward “all needed hardware and parts” list with part numbers.

The drivers side isn’t the same Becuase the battery box isn’t ont he other side so how do you run the wires from on light to the next on the left side? You can’t “repeat same steps” when the l left side do the car isn’t the same as the right…

Will this work for an i3 ? I'm having the same fault, after getting tires changed.

5w30 for colder weather temps, then 5w40 for spring and summer?? Or am I wrong here! I live in MN so temps get down to 20-30 during fall then it gets put away for the winter!

True you need a code cause most times it’s the rear wheel sensors

This video made me buy the product. Used it on my BMW and the results were incredible. Thank you guys for posting this.

Who much did this piece cost you? Can you provide the link?

Yo for the description you put 215Nm / 15ft lbs instead of 215Nm / 154ft lbs

Question, I installed the diff poly bushing on my BMW M4 DCT too and I was wandering if you have the same noise coming from the diff as me, it sounded like a knocking/ Clunk noise when gear is shifting down or when you push the gas pedal really fast or you let go of the gas really fast and I was wondering if you have this experience after installing them?

Had no idea there was a vertical acceleration sensor! Sounds like a little bit of German over-engineering

does this error cause poor ride quality?

Ugg I’m having this same exact problem

I know this is an old video but hopefully will get an answer. For the bolt that is covered by the gas tank, couldn’t you use a torx ratchet wrench to fit in there without having to drop everything more?? Great video 👏

Just wondering cause my car is staring to have a slight clunking noise in the rear when cruising and getting on the gas and letting off the gas is this what you experience?

Thanks for the video very informative. Did you have to clear the codes once the sensor was fitted or did it go away by itself? Thanks

The dual mount bracket looks a great solution, good job and tutorial. Is this job worth doing on a 2019 car with the later bush? Thanks

Liqui shitly is trash

Was the $5000 worth the 100hp?

So I did mine and it vibrates a lot I know you said if you over tighten them it’ll vibrate but why is that ?

You might find this video with the truth about leather coatings interesting! ruclips.net/video/qIiZDqN2pDo/видео.html

Hi. Could you share me the information on the bushing removal tool ??

Thanks mate for this DIY, I was looking to restore the blue 12 clock marker on the M performance steeringwheel because I have also some wearing on it. Will give it a try!

Hey my passenger side light sequence for these oled tail lights does fully start anymore. Any information on how to solve this would be legendary

I have perform these two mods and have transformed the shifting experience. I do recommend removing the clutch delay valve inside the slave cylinder.

How much time between coats

Awesome video, I will have to try these on my F87 😎

I sanded it too super smooth but it became rough after applying the paint, what should I do?

Great video! I see they sell a 'Pale Blue' as well, I wonder if you can just use that and not have to mix in the white.

Does it come with a valve controller? As in can you manually open and close the valves? Or does the bmw ecu control it?

Hi there, where do you plug in the black connector that is on the boot lid light?

Yo bro manual says 5w30 on S55 engines. I see that you used 5w40 instead. Have you had any issues? I have a couple mods to my car and wanted to try liqui molly but they only sell 5w40

Gutes Video 💪🏽 Wieviele Lenkräder kriege ich mit einer Packung Aufbereitet? Was glaubst du?

do mine!

Awesome clips!! This is stock downpipe and the full Dinan exhaust? (Midpipe + Axelback)

The OEM battery has a small connector port 6:12. I currently have a non OEM battery and that battery does not have a connection port. The connection is supposed to be a battery module inside LI-ion battery which allows you to program the battery. Do you know a way to program the battery without buying an OEM battery?

Your choice on where the modules were glued to the trunk wasn’t a good option, my trunk cover didn’t wanna fit back on. Had to remove them and hide them inside the trunk

Are these exact tail lights compatible with the 435i?

Same procedure for F83? And how do u know whether or not to replace driveshaft?

hey what wheels setup are u running?