Видео

I am noob admittedly, but why not simply use swivel to join them? Is there a reason not to?

Have you ever considered testing the elasticity of the line, as in its ability to retain its breaking strength as it stretches? (I might be using the term wrong). I've seen people saying traditional mono has higher elasticity than fluorocarbon but I've never seen it actually tested. In my mind the procedure would go something like this 1. establish breaking strength 2.using a new piece of line, apply 90%(or whatever value is enough that it stretches) of the tested breaking strength. 3.release the tension 4.test the breaking strength again As I understand it, If the line has high elasticity it should retain most of its breaking strength even after it is stretched. This would be helpful because elastic failure isn't something you could see, but could result in your line breaking unexpectedly. It could also impact the knot strength of a line, maybe less so in an fg knot I'm not sure. Either way your videos are really informative. its nice to be able to look at test results and not just marketing.

Wonder if one of the power pro spools was mislabeled, always have had good experiences with the reliability of x4. Would love to see a redo with more accurate diameter measurements like what you did with Max Cuatro… I’d be willing to donate a 20 lbs spool. Appreciate the awesome stats!

Dedication, proficiency. Keep up good work! Respect!

Hi.Looks like you have 2 different lines there because the one on the left has white marks every 1m and the upgrade green one is just green all the way.i use the ygk lines for some time now and the one on the left looks like g soul

Wich braided line do you recomend for baitcasters?😊

I got this line in #0.6pe here in Europe and its closer to #0.4 diameter visually, very thin. Managed to get 3.3kg breaking strain, short of stated 5.2kg, but interestingly, on some Australian website bs stated 8lb which is believable

FG knot was the first line to leader knot i learned for offshore fishing (bottom bashing) and i have never lost a fish from the knot failing, even with a shark has been on the line

Where is the review for the Yo-Zuri HD CARBON PINK? Searched the channel and on your website but could not find. Obviously want to see #1 ranked. Agree, would love to see comparison to Izor XXX.

Как всегда очень информативно и полезно! Спасибо за видео!!

Super test!

Incredible video. It’s shocking that anyone still recommends a uni knot or uni to uni considering every test I’ve seen shows them as the weakest.

Possible test daiwa d-fron and ygk xbraid absorber flurocarbon?

Did this line is from Aliexpress? There’s a few options there and I would like to know if they are legit or not.

I need to send you some Izorline XXX 40lbs as a comparison to the Seaguar

Do sunline shock leader NY and Varivas ocean record 👌, cheers

I think abbrasion resistance is more important than fg knot.. and would be great to configure on the table own preference for example for some fishing I search for the roundness line with max abbrasion resistance,, other times just pure tensile strenght in, for example 0,16-0,18mm

Gosen Roots X8 test please ! Thank you !

Hello, im fostering through the Test Reviews but couldnt get to any conclusion. What would be the #1; #2; #3 pick from Ali express regarding a braided line for bfs fishing?

Essa linha tem 1 PROBLEMA , É MUITO CARA. 🤣🤣🤣

Can you test it with relix knot? It is simple to make and greater result than fg. With larger flouro leader is above 100% strength. The original knot posted in youtube 4 years ago.

I would love to see the results of Tasline's hollow core braid

Definitely need the thinnest line video, would love to see the thoughts on the maxcuatro

Hey, can you do a review of the Sinister Strand braid from Golden State Fishing? Its reasonable price that and claims to be micro diameter and premium grade.

On the other hand there is a problem with the FG knot tutorial if we assume that the blue is the fluoro and that the red is the braid there is a big problem

This one performent was ready bad for me. Very easy to brake when you set the hook hard

Have you ever tested MUMUJIURI x8 braided line? It looks like very nice quality line for its price. Got myself one recently and was impressed

Superb work. Respect

Never tie the albright knot please just learn the fg

Thanks for alleviating some of trust issues!! It’s so confusing and super slick v2 has had some interesting findings, especially since it’s so popular. I’ve since moved on from SSV2 to Varivas on my main combos.

I have this line as PE1 in use and I like it very much in terms of handling, thickness and it is not fading much. But I have problems with knot strength and I think it is related to the smoothness. The line cuts the fluorocarbon quite easy, eventgough it is a fg knot. Maybe someone has a better knot, for super smooth lines?

Thanks 😊

If you're going to test them, test them all at the same pound test so it would be a much more accurate test

I watched your test, and they're not fair. You can't use a 6 lb test, and then on another one, use a 30 and have the same abrasion resistance. If you want to make it fair, use all the lines you test 30, then it would be a fair

the Linelaboratory website has been down for about 8 hours, how long will it be down for?

Just discovered this channel right now. So interesting, thank you!

Another great test - thanks.

I've found that the only two brand of lines that maintain consistent tensile strength as it gets thicker and thicker are Berkley Pro Braid in white and Power Pro Maxcuatro. Consistent tensile strength up to 100 lbs actual breaking strength. Yozuri is the best value with tensile strength just below the other two mentioned brands but much cheaper. All other line just use cheaper material as it goes up in labeled strength. It cost the manufacturer way more in raw material to produce a 50 lbs line vs a 10 lbs so they end up using cheaper grade of spectra beyond the 50 lbs strength. Tensile strength and FG knot strength also tends to drop as you move up in line strength. Maxcuatro and Berkley Pro Braid seems to have the best FG knot strength for line whose actual breaking strength is greater than 50 lbs. PR knot people do not care because the PR knot is the great equalizer when it comes to the best knot breaking strength percentage NO MATTER which brand of line they use or what the real actual breaking strength is.

Zalt's Xenos X8 by Linesystem ?

Fantastic video!!! This was very well done 👏 👍

Please test HITENA RAPTOR...AND Hitena pureline... thanks

I really like these braids. I bought 500m on sale for $7. SeaKnight 33lbs has a strength of about 12kg at the knot. Thank you for the review!

😮😮😮😮😮

Спасибо! Это полезно для меня!

These line tests are super cool!! The fg knot breaking at 40lb I can live with, but the abrasion resistance really let that line down. Especially since I purchased that line for my Murray Cod setups, where abrasion resistance is kind of important😅. Just letting you know I eventually evolved from a Sh*tgoose to a Firebird, but I’m still stoked to see the old alias come up on the tv😂. Keep breaking those lines legend🫡

@linelaboratory what PE3 (50 Pound) would you personally spool on an old (2010) saltiga 5000 to go for tuna and Amberjack? Thinnest real diameter would be essential to be able to cast all day long. Also knot resistance would be important, abrasion not so much

PE4 60Lb c'est très bien. Encore une fois 33/100 +22% = 40.26/100 (on est toujours entre ces 20/22% de plus chez YGK pour le diamètre max). Pas de problème quand on connait les produits, qu'on est renseigné un minimum, qu'on connait les réelles limites de la technologie et qu'on fait des tests... Si vous prenez de l'ultra haut de gamme chez YGK, le plus cher, il n'y aura pas grand chose de différence, dans les premiers prix ils utilisent déjà de la fibre très haut de gamme, la méthode coute juste beaucoup moins cher car plus rapide et moins minutieux, micro fibre plus grosse, et on ne ressent pas forcément de différence même si il y en a une. C'est comme payer pour avoir une tresse 5% meilleure (plus ou moins) pour 3 fois plus cher. On sera très nombreux à ne pas voir la différence malgré un prix x3, donc la déception sera à la hauteur de la différence de prix. J'aime les X4 et X8 Upgrade. On est aux limites de la technologie au bout d'un moment... Vous voulez une tresse qui dure : une 4 ou 8 brins, tressage bien serrée avec revêtement épais, le plus rond possible. De la solidité pure en linaire et au noeud : Une tresse torsadé (fibre droite, pas de tissage, enrobée d'un énorme revêtement résineux épais, comme duel armored F+) mais usure de surface beaucoup plus rapide. Je serais tout même curieux de voir ce que donne une X9 YGK ou Varivas en diamètre PE 3 a plus. La réalité se fait ressentir à la pêche. Je ne vois pas de différence avec ma PE0.8 YGK Shinji X9 et une YGK X8 Upgrade ou Bornrush etc...

👌🏿👍🏿🎣 I know you haven't tested but what you think of same line in 30 lb Because I'm looking for a line that's breaks around 12 kg and around 0.2 mm dia so please suggest 🙏🏿

How is it 116.14% Of Claimed maximum break if it broke below the Claimed max of 66lbs?