Видео

Thank you for making this. Will you still have few of those until September? I’ve been wanting to get the Goggles2 and the o3 camera for my RC buggy, but this was my very problem. The battery wiring.

🔥

What do you recommend for the battery?

Kickass review thanks bud

I just did a video comparison on all the padding currently on the market. There are better options YES!

Before you try to make an instructional video, learn how to use the radio!!!! You are completely out cycling in several parts. The JR connector on the side of the radio is NOT the "Servo Tester" and you will likely burn the radio if you try to use that output as that. The input menu has nothing at all to do with the channel order, it doesn't matter in which order the different names appear, they are just "names" for your knobs, buttons or steering wheel!

I want to do this to my losi DBXL 2.O Gasser.

I want to do this to my losi DBXL gaser

Just sent you an email. Excited to try this out.

Does anyone remember Nomadio??

Bro, you should take a vacation at Siargao Island and capture the beauty of the Island using the FPV RC. Content

Bought this board and the drive wheel literally shredded off after 3 miles? Anybody else have this issue?

I think FPV is the future of RC Drag Racing.

Still selling?

I cant boost the distance using ELRS , stuck at 200m.. tested at dense neighbourhood receiver using ER5C, transmitter using mt12 radiomaster Where did it wrong?

What would you charge to make this?

What are you thoughts for Spektrum? I have often thought of running an air radio. I still use a wheel

I do not recommend buying this product!!! I placed an order and he responded, I can't send it because the product has flaws and signature problems, and he never sent it, BAD SHOPPING EXPERIENCE...

Email sent. Need a few of these. Been poking around to add this to an rc rock crawler, as Ive seen a few videos, but mainly for an RC lawnmower I built. Least I could do one part of the job sitting down in the shade, or better yet in the AC.

I run a flysky noble don’t think I could do crossfire with that

Anywhere i could buy something like this?

I wish i could understand how build fpv....

Hi awesome video currently working on my build I was wondering if you have any recommendations for budget friendly video reviver screens or alternatives if it’s worth noting I’m going for an analog build

You dont have the integra! You need to edit your headline as I wasted my time.

I've had my V3 for years too but last year the connection started cutting out on me, i opened it up and noticed a wire rubbed through on the capacitor and I thought I found the issue. Ordered and installed a new motherboard for it and it was working great for a while again until the remote started not braking at times, and it would lock to full speed at 30mph i would have to jump off and let it shoot into the street or brace for it and ride it out, that was terrifying but i was using it to commute so i put up with it for as long as I could. Did you ever notice anything like that with your V3 and has the V5 been free of issues like that?

Where to buy?

How do you manage to have such a huge reach? because I'm using a Dji o3 air unit but it doesn't capture as far as you.

I guess the video has been stabilized? Do you use a gimbal?

Hello from germany. I have a question. Ch2 is for steering. What means the subtrim mode? Best regards

These still backordered?

I know this is an old video, but do you remember when you did the full load test if the current fluctuated at all? I recently bought one and it will not hold steady power. I set any battery to charge on any port. Set it to 15a and it will bounce between 6 and 15 I actually sent it back because it seems like a faulty unit. But I was wondering if they did that on purpose to manage heat. Haven't seen anyone else run one at full power. All the other videos show them running at 1-2 amps. I would notice the power dump after about 30 seconds, then it would continue throughout the charge cycle.

Subbed

You’re very good at tutorials for the MT12. Can you do a video on using the 3 position switch to modify the throttle output or maybe “modes”? Position 1 crawl. Position 2 med speed. Position 3. How to modify the end points for each switch position?

you should do this again in 2024

These being sold yet?

Hi Chad, Can you talk a little more on the rest of the wires around the air unit and how to connect them please? Working on my first build now (the air 03 unit is in the mail on the way here) - All the in depth instructional videos I've been able to find are for using it on vehicles with flight controllers and have led me to beleive that the VTX won't reach full power if it's just soldered onto the main power line. How did you do it? Looks like you used all the sensors when connecting the XT60 around 4:45... This video is what inspired me by the way 💪

Any recommendations for a prebult?? If posible on a cheaper side.

Rule 2 of skateboarding period is learn to fall correctly but helmets help when you don't see it coming (you should expect everything bad will happen)

Chad, I see you live in the Portland area. Want to do a commission build for a crawl space discovery drone w/ FPV and a 4k camera and LED's for doing inspections and bids for a plumbing company?

WowGo 3E belt drive is a better deal, $429 out the door from the site with discount code.

Sent you a message on Instagram. I want one how do I order?

I have an HSP RC now and I order radiolink rc6gs, still saving money for the goggles. if you have an extra that doesn't use please donate it to me lol..

Where you see this thing for $350? It's $399 as if 5/18/24

Is it possible to get this type of range and obstacle pentetration with analog or digital only?

So what exactly is this build using? I notice you included old parts too... what all was used for the build in this vid?

"How to blow loads.." HUH "... of money." Oh, okay.

Exactly what I want to do. A lot to learn

Do you think Elrs module can get longer range than crossfire module in fpv rc car