Okay, just got the new soft foam faceplate for my goggles 2. Fits like a dream and very comfortable. One problem. Now I’m constantly getting my lenses fogging up. Very quickly and pretty bad. It’s very maddening. Okay I live in a hot tropical climate in southern Taiwan so that doesn’t help. Question… has anyone tried anti fog spray or wipe with any success? Anyone else have this problem? The fitment of the new gasket is night and day better now with no light leak. The original gasket had a huge open space at the sides of the goggles. With the new faceplate I seem to have better peripheral vision. Not perfect but I can live with it. 
Pinning this so if anyone has tried anti-fogging spray on the lenses, they can chime in. I did hear some reports of lenses being damaged by something, but wasn’t sure if it was a cleaning agent, anti-fogging spray, or what.
@@ChaddRainsFPV thanks, I got some anti fog spray from an optical shop. I don’t spray it on the diopters but I spray it on a tissue and wipe it on. It did work on a pair of glasses that I sprayed one lens only and put it over a steaming kettle. The treated lens stayed clear. Going to try my goggles next.
@@kchappelle If you have Integras I would recommend just spraying in the diopters and not the lenses of the goggles themselves. Please check back in a few weeks and let us know how they held up 🙏
@@kchappelle Right on, I didn't expect internal fogging issues, but if you did have Integras instead of the Goggles2 they have a set of diopters that I would suggest coating instead of the actual lenses. Since you have Goggles2, the diopters are essentially built in and so you would have to apply to the lenses. Please let me know how it holds up in a couple weeks 🤙
just recently got the pydrone soft foam and WOW. What a difference. SO so much better in terms of comfort and fit than the stock DJI Goggles 2 piece. Thank you for the recommendation!
Can confirm. For ME, on my face, the Pyrodrone V2 Comfy Foam is the best solution I've found. It provides some relief while eliminating all light leak and still provides the exact clearance (from lens to eye) necessary to see then entire image edge to edge. Your mileage may vary.
Nice review! We put a lot of work in it, and batch 2 will even be better :). It will be even more comfy! Thanks for putting a good word out! And yes, it is sold in many shops and all use their own name or branding.
@@ChaddRainsFPV the one you use now has already been updated with some more thickness at the temples and cheeks. So when Pyro gets stock again it is the batch 2 version. Also there is another even more comfy one in development more along the line of the V1/V2 comfort foam but still keeping good focus on the optics for non Asian people. When that is ready I will make posts in the big Facebook groups like it did last month for this foam😎
@@proshotfpv5337 I got the pyrodrone comfy foam and it's good. Nice job. If I could make a suggestion for future versions it would be to make the foam a little bit wider so it has better support. Also, when I first tried the goggles they fogged up immediately but I tried pulling them away from my face just slightly so there was a small air gap around the bottom and the fog went away almost instantly. I wonder if there might be a way to incorporate some sort of spacer or vent between the foam and the goggles? Seems like that might solve the fogging issue.
@@flipfpv my experience is you need some gap around the nose for air to enter. My preference is to have the nose piece out. But it may not work for everyone as the bottom needs to be stiffer/more dense to take over support. A wider "fatter" foam without nose piece is currently in development already and will be available in the near future 😎.
Thanks. I've been trying different foams. And rite now I'm I cut out the sides of the iflight foam and using that. It's the best I came up with. But now I'll go with pyrodrone. Thanks for your vidio. Helped out alot.
I was about to sell my goggles 2 and fly my V2s because I could get closer to the lens. Perfect fit for me is my eyelashes almost touching. I just ordered, Fingers crossed!!!
2:24 Great video! Have you found a lens cover that works with the comfy foam? I’ve read several folks saying that most of them only work with the OEM faceplate. Thanks!
@@ChaddRainsFPV thanks for checking! Unfortunately, if you bought the Goggles Integra they don’t come with lens covers from DJI and you can’t buy the DJI lens cover separately for the Goggles 2 from DJI. 🤦♂️
I personally really dislike the over-the-head straps unless worn with a hat. I agree it can make the stock faceplate more comfortable. But with upgraded foam it really isn’t an issue 🤙
How the heck did you get it to stick ? Such an issue with it not sticking . Yet I can totally see zero light leaking into the goggles. And is extremely comfortable. If I could only get it to stick
Hey Dude good job Chad I see you have a long range setup. Can you share with me what you use for video TX and for control over long distance. Think of the Chimera next 7" but not sure if my TBS will do the job. And my goggles 2 with O3. your thoughts
So on my long range rigs I always use tbs crossfire locked at 50hz refresh rate. This will give you the best range vs just about any other system. For video I actually like the stock Goggles 2 with an O3 using tall FlyFish antenna. They’re a great match and you don’t have to switch to non-folding antennas on the goggles, so they’re still nice to travel with 🤙
@@ChaddRainsFPV Thank you. I have already asked pyrodrone. I have a big nose and I don't know if this would suit me. At the moment the integra goggles squeeze my nose too much and are very uncomfortable. 😅 thanks mate
Usually because I can only find an area that is about 1km LOS, beyond that there are some obstacles (like trees, hills, bushes or buildings) which drastically degrade the signal when you’re at that range. I’m sure I could go much further in an obstructed area, but there are no airports willing to support my shenanigans at this time hahah. I can go over half a kilometer with a lot of obstructions. 1km with few obstructions. And several KMs with no obstructions. I’ve proven 2 of the 3 so far 🤙
There should be a few US retailers stocking good foams soon! I know there is already 2nd batch in the works and will hopefully get delivered to the US soon 🤙
@@ChaddRainsFPV I'll definitely be on the lookout for the 2nd batch, as I desperately need it. During flights, I become a mouth breather due to the pressure the goggle 2's put on my nose!
I haven’t tried it yet but I really should reach out. IFlight have been awesome to me over the years but I’ve never reviewed any of their stuff I don’t think. Reports from others say it’s been great, but I’ve yet to see an actual review showing what’s different. I’ll do my best to get that done 🤙
@@ChaddRainsFPV I have the iflight one. It's comfortable but I wish it was either thinner or a little softer to get my face closer to the screens. Especially the top section.
Hmm, there should be a version for the Walksnail Avatar / Fatshark Dominator HD. Im nearly certain the Goggle 2 comfy foam wouldn’t work on any other goggle. Hope this info helps 🤙
I need these for the V2's. Damn things are straight violating my face when they're on. Having the perfect marriage of goggles and face are what seems most important for my eyes to see it clearly though.
@@ChaddRainsFPV Hey have you done any testing on the O3 regarding manual vs auto mode on the goggles? I read somewhere that a guy said he got much better range and penetration just picking a manual channel in FCC mode compared to staying in auto mode. I'm wondering if this means you don't actually get full FCC power in auto mode and need to be in manual mode on a channel. I really want to test this but I'm not sure when I'll get a chance.
@@Magneticitist Yup, I have noise issues on channel 2 in my area. So I have to use manual and I get way better range. That being said, if I'm flying / driving with others I chose auto as it typically helps other people's video, especially if I'm on O3 and they're using a different system 🤙
@@ChaddRainsFPV Ok thanks! That's exactly what I was wondering.. if maybe Auto mode may just be more for flying with others. I really need to try it cause so far it's been a confusing dilemma of thinking I see really good penetration at times, but also feeling like it's still fizzling out way too early.
can you measure your head it looks similar to mine ,, thanks ,,, just found a demo goggles 2 set for $450 the V2 fit like shXX these probably will too ,, i have been flying mostly analog only because the screens are better then my V2 goggles may try the foam window seal at walmart
Goggles 2 are the best goggles ever made hands down ,,,,,,Got the new Iflight Version 2 foam type B narrow version ,, I did cut nose out and works incredible see perfect edge too edge crystal clear ,, i hated the old box style V2's I always would choose my analog just because of the diaptors on my Skyzone and the brilliant color .. still analog color seems better because you can adjust it ,, its the same issue blurry edges if your eyes are not prefect distance actually the skyzone are worse then the dji goggles ,,your eyelashes have to almost touch lens ,, the goggles 2 are far superior to the V2 the problem is its not a wow but just so clear and smooth the colors are incredible also tech geeks hate the 03 because you are very limited to adjustment's which i just want to plug and fly @@ChaddRainsFPV
I bet you guys got the updated version already. The manufacturer is in EU and told me there is a revision coming to the US soon. I didn’t ask details on the differences but I guess it’s a bit thicker and even nicer 🤙
![☀ Новый синелог. Задает тренд или просто выбесил? 🤬 [Cinelog35 V2]](/img/1.gif)
Okay, just got the new soft foam faceplate for my goggles 2.
Fits like a dream and very comfortable. One problem. Now I’m constantly getting my lenses fogging up. Very quickly and pretty bad. It’s very maddening.
Okay I live in a hot tropical climate in southern Taiwan so that doesn’t help.
Question… has anyone tried anti fog spray or wipe with any success?
Anyone else have this problem?
The fitment of the new gasket is night and day better now with no light leak. The original gasket had a huge open space at the sides of the goggles.
With the new faceplate I seem to have better peripheral vision. Not perfect but I can live with it. 
Pinning this so if anyone has tried anti-fogging spray on the lenses, they can chime in. I did hear some reports of lenses being damaged by something, but wasn’t sure if it was a cleaning agent, anti-fogging spray, or what.
@@ChaddRainsFPV thanks,
I got some anti fog spray from an optical shop. I don’t spray it on the diopters but I spray it on a tissue and wipe it on. It did work on a pair of glasses that I sprayed one lens only and put it over a steaming kettle. The treated lens stayed clear. Going to try my goggles next.
@@kchappelle If you have Integras I would recommend just spraying in the diopters and not the lenses of the goggles themselves. Please check back in a few weeks and let us know how they held up 🙏
@@ChaddRainsFPV I have the goggles 2 and it’s the lens of the diopters that are fogging up, nothing internal.
@@kchappelle Right on, I didn't expect internal fogging issues, but if you did have Integras instead of the Goggles2 they have a set of diopters that I would suggest coating instead of the actual lenses. Since you have Goggles2, the diopters are essentially built in and so you would have to apply to the lenses. Please let me know how it holds up in a couple weeks 🤙
just recently got the pydrone soft foam and WOW. What a difference. SO so much better in terms of comfort and fit than the stock DJI Goggles 2 piece. Thank you for the recommendation!
Can confirm. For ME, on my face, the Pyrodrone V2 Comfy Foam is the best solution I've found. It provides some relief while eliminating all light leak and still provides the exact clearance (from lens to eye) necessary to see then entire image edge to edge. Your mileage may vary.
Aye right on! Appreciate the comment and clarification 🤙
I flight version 2 foam .. they have a narrow one Type B and a wide one type A ...... just came out
Nice review! We put a lot of work in it, and batch 2 will even be better :). It will be even more comfy! Thanks for putting a good word out! And yes, it is sold in many shops and all use their own name or branding.
Glad to hear! Please let us know if you have any other products we should look out for 🤙
@@ChaddRainsFPV the one you use now has already been updated with some more thickness at the temples and cheeks. So when Pyro gets stock again it is the batch 2 version. Also there is another even more comfy one in development more along the line of the V1/V2 comfort foam but still keeping good focus on the optics for non Asian people. When that is ready I will make posts in the big Facebook groups like it did last month for this foam😎
@@proshotfpv5337 I got the pyrodrone comfy foam and it's good. Nice job. If I could make a suggestion for future versions it would be to make the foam a little bit wider so it has better support. Also, when I first tried the goggles they fogged up immediately but I tried pulling them away from my face just slightly so there was a small air gap around the bottom and the fog went away almost instantly. I wonder if there might be a way to incorporate some sort of spacer or vent between the foam and the goggles? Seems like that might solve the fogging issue.
@@flipfpv my experience is you need some gap around the nose for air to enter. My preference is to have the nose piece out. But it may not work for everyone as the bottom needs to be stiffer/more dense to take over support. A wider "fatter" foam without nose piece is currently in development already and will be available in the near future 😎.
@@proshotfpv5337 Nice!
Chadd is on fire bro knows his stuff and thanks for sharing with us 🎉
where do you even get either one of these in Europe?
Thanks. I've been trying different foams. And rite now I'm I cut out the sides of the iflight foam and using that. It's the best I came up with. But now I'll go with pyrodrone. Thanks for your vidio. Helped out alot.
Awesome and helpful content as always
great video man!
Great video. Thanks for the info.. subscribed 💯👌🤙👍
I just did a video comparison on all the padding currently on the market. There are better options YES!
I’ll go check yours out in the morning!
I was about to sell my goggles 2 and fly my V2s because I could get closer to the lens. Perfect fit for me is my eyelashes almost touching. I just ordered, Fingers crossed!!!
If your Goggles2 were uncomfortable with the stock faceplate, I think the ComfyFoam 2 is 100% the answer. Thanks for the comment brotha 🤙
@@ChaddRainsFPV my foam showed up on Saturday, absolute perfection! I am now from 90% back up to 100% scale.
@@OCD_FPV Dude that's awesome! Thanks for the follow up. Nobody has come back to tell me they work for them (or don't) so I def appreciate it.
just ordered the pyro, lets see how it works. i have the same problem of eyelashes touching the lenses and nose pinching.
2:24 Great video! Have you found a lens cover that works with the comfy foam? I’ve read several folks saying that most of them only work with the OEM faceplate. Thanks!
Just checked, the OEM lens cover works with the Comfy Foam!
@@ChaddRainsFPV thanks for checking! Unfortunately, if you bought the Goggles Integra they don’t come with lens covers from DJI and you can’t buy the DJI lens cover separately for the Goggles 2 from DJI. 🤦♂️
I don't see many people using the DJI supplied over-the-head strap which I've found to be an improvement with my Integras.
I personally really dislike the over-the-head straps unless worn with a hat. I agree it can make the stock faceplate more comfortable. But with upgraded foam it really isn’t an issue 🤙
How the heck did you get it to stick ? Such an issue with it not sticking .
Yet I can totally see zero light leaking into the goggles. And is extremely comfortable. If I could only get it to stick
Wild, I had zero issue. I stuck the rough side Velcro on the goggles and the foam has been working great 🤙
I wonder how it compares to DJI ones (not the one they ship it with but original replacement that they call soft fit)
Hey Dude good job Chad I see you have a long range setup. Can you share with me what you use for video TX and for control over long distance. Think of the Chimera next 7" but not sure if my TBS will do the job. And my goggles 2 with O3. your thoughts
So on my long range rigs I always use tbs crossfire locked at 50hz refresh rate. This will give you the best range vs just about any other system.
For video I actually like the stock Goggles 2 with an O3 using tall FlyFish antenna. They’re a great match and you don’t have to switch to non-folding antennas on the goggles, so they’re still nice to travel with 🤙
Question i bought from the link comfy foam 2 but the foam stopped at the nose ?
Thats the comfy foam ultimate
Question. Are the PYRODRONE COMFYFOAM compatible with the DJI goggles integra? Thank you
I am nearly certain they are, but I don’t have Integras to check. Prob best to email Pyrodrone 🤙
@@ChaddRainsFPV Thank you. I have already asked pyrodrone. I have a big nose and I don't know if this would suit me. At the moment the integra goggles squeeze my nose too much and are very uncomfortable. 😅 thanks mate
@@VCRdrone Ahh my buddy had the same complaint and while he did say the Comfy Foam was better, it still squeezed his nose. Hope this helps bro 🤙
I got the googles x I’m desperate to change the foam
Hi, ive been seeing your videos and i was wondering why can you only get around 1km or range with los when the dji and crossfire are rated for more?
Usually because I can only find an area that is about 1km LOS, beyond that there are some obstacles (like trees, hills, bushes or buildings) which drastically degrade the signal when you’re at that range.
I’m sure I could go much further in an obstructed area, but there are no airports willing to support my shenanigans at this time hahah.
I can go over half a kilometer with a lot of obstructions. 1km with few obstructions. And several KMs with no obstructions. I’ve proven 2 of the 3 so far 🤙
Awesome. I've been looking for a solution. Sucks that the Pyrodrone foam is out of stock.
There should be a few US retailers stocking good foams soon! I know there is already 2nd batch in the works and will hopefully get delivered to the US soon 🤙
@@ChaddRainsFPV I'll definitely be on the lookout for the 2nd batch, as I desperately need it. During flights, I become a mouth breather due to the pressure the goggle 2's put on my nose!
@@yahtnichols That was my exact problem too. The silicone sleeve ready did make them comfortable enough to use but mouth breathing the whole time lol
@@yahtnichols It's back in stock now, just ordered it.
Have you tried the new iflight foam? How does it compare to the pyrodrone's?
I haven’t tried it yet but I really should reach out. IFlight have been awesome to me over the years but I’ve never reviewed any of their stuff I don’t think.
Reports from others say it’s been great, but I’ve yet to see an actual review showing what’s different. I’ll do my best to get that done 🤙
@@ChaddRainsFPV I have the iflight one. It's comfortable but I wish it was either thinner or a little softer to get my face closer to the screens. Especially the top section.
@@jgrudnicki is it the new iFlight B version of the foam? They have had some revisions, even from the time I made the video 3 weeks ago.
@@ChaddRainsFPV yes, that's the one
Thanks bro!
Do you think the Pyrodrone foam will work with Walksnail Avatar goggles? My eye lashes always touching my screens.
Hmm, there should be a version for the Walksnail Avatar / Fatshark Dominator HD. Im nearly certain the Goggle 2 comfy foam wouldn’t work on any other goggle. Hope this info helps 🤙
@@ChaddRainsFPV there is but not as thick as in the video. thanks tho.
Thanks! Will try it out. Just purchased using your affiliate link :)
I need these for the V2's. Damn things are straight violating my face when they're on. Having the perfect marriage of goggles and face are what seems most important for my eyes to see it clearly though.
Oh the v2 foam is tried n trued now brother! I’ll link that in the description too. But the Goggles2 and Integras now have some good foam too 🫡
@@ChaddRainsFPV oh awesome thanks bro. I feel like a mutant wearing the stock ones.
@@ChaddRainsFPV Hey have you done any testing on the O3 regarding manual vs auto mode on the goggles? I read somewhere that a guy said he got much better range and penetration just picking a manual channel in FCC mode compared to staying in auto mode. I'm wondering if this means you don't actually get full FCC power in auto mode and need to be in manual mode on a channel. I really want to test this but I'm not sure when I'll get a chance.
@@Magneticitist Yup, I have noise issues on channel 2 in my area. So I have to use manual and I get way better range. That being said, if I'm flying / driving with others I chose auto as it typically helps other people's video, especially if I'm on O3 and they're using a different system 🤙
@@ChaddRainsFPV Ok thanks! That's exactly what I was wondering.. if maybe Auto mode may just be more for flying with others. I really need to try it cause so far it's been a confusing dilemma of thinking I see really good penetration at times, but also feeling like it's still fizzling out way too early.
Can anyone pls tell me where I can buy the Velcro strap for the dji Integra?
for me, pyro drone foam did not worked at all. Delivered to another continent only to see it's not working :
can you measure your head it looks similar to mine ,, thanks ,,, just found a demo goggles 2 set for $450 the V2 fit like shXX these probably will too ,, i have been flying mostly analog only because the screens are better then my V2 goggles may try the foam window seal at walmart
Hahaha I wear a size 7 3/8 fitted ball cap. Without the foams all the DJI goggles fit terrible in me too. Hope this helps 🤙
Goggles 2 are the best goggles ever made hands down ,,,,,,Got the new Iflight Version 2 foam type B narrow version ,, I did cut nose out and works incredible see perfect edge too edge crystal clear ,, i hated the old box style V2's I always would choose my analog just because of the diaptors on my Skyzone and the brilliant color .. still analog color seems better because you can adjust it ,, its the same issue blurry edges if your eyes are not prefect distance actually the skyzone are worse then the dji goggles ,,your eyelashes have to almost touch lens ,, the goggles 2 are far superior to the V2 the problem is its not a wow but just so clear and smooth the colors are incredible also tech geeks hate the 03 because you are very limited to adjustment's which i just want to plug and fly @@ChaddRainsFPV
Tried iflight, tried the nfactory one…want to get the pyrodrone ones but I am from Europe so we are still f@%ked
There is a pinned comment from the foam manufacturer. They are in Europe. You can find them 🤙
Ladies and gentlemen the coolest Chadd reins
This is weird, but it's listed as V3 on most EU stores.
Regardless, it is SUCH an upgrade it's not even funny.
I bet you guys got the updated version already. The manufacturer is in EU and told me there is a revision coming to the US soon. I didn’t ask details on the differences but I guess it’s a bit thicker and even nicer 🤙
fellow~ yo. really epic video-work. talk to you soon- :)
Buddy, do we STILL have to have that stupid Controller to use the goggles?
Not at all, unless you want to fly the Avata. I recommend the RadioMaster TX16S MkII for drones and the RadioLink RC8X for cars 🤙
le probleme du masque jai couper le nez du masque original maintenant ok
You dont have the integra! You need to edit your headline as I wasted my time.
The goggles 2 and Integras are both compatible with the foam I linked. The Goggles v2 are different 🤙
Trim your eyelashes
the set dji sent me, are not like what you so. they (mine) SUCK! They stick on over the original pad. simply dumb way to fit our americans faces