Видео

Good afternoon, you mean like this: www.repairyourspeakers.com/en/repair-videos/repair-with-tone-generator/c-160 ? Best regards, Fred

i saw that too..thought about same . and would guess that this driver may be junk and they just used for demo of doing the surround. just a guess tho.

Good morning, thanks for your reply. The link to our webshop is: www.repairyourspeakers.com. It's by the way in 3 languages, English, German, and Dutch. Best regards, Fred

Good morning, sorry for the late reply. I guess IPA alcohol is now the best liquid to remove the old foam. Best regards, Fred

Good morning, thanks for your reply. Your completely right, the wires on the front should be as far as possible in a kind of bow as original. I have found some pictures of the JMlab speakers I got then: refoam.info/jmlab-1.jpg and refoam.info/jmlab-2.jpg. I don't know if I later just pulled the wire gently some more in a bow. Best regards, Fred

Good morning, sorry for the late reply. Most times when a speaker is some tight at the baffle I use a screwdriver, but not as maybe suspected between the cabinet and the frame of the speaker. Then the change of damaging the cabinet is great. I use the screwdrivers, most times a small and certain strong one, in a mounting hole of the speaker unit. Then you must be carefully(!) to not slide away against the cone and frame. So I put the end of the screwdriver between my thumb and other fingers, and a kind of lift one side of the speaker. I always take care that the screwdriver is in the mounting hole good under the frame. It might be necessary to push the screwdriver some under the frame in the wood. After replacing you won't see the small spot anymore, and the frame is still well tight on the baffle. All at own risk. Best regards, Fred

He mentions the glue with a link to it in a reply to another comment.

@@thischannel1071 Found it. Thanks 🙏

Good morning, sorry for the late reply. Information about the glue we use can be found here: www.repairyourspeakers.com/en/glue-brush-fluid/c-3. Selling of the glue can be done here: www.repairyourspeakers.com/en/glue-brush-syringe/g-11. Best regards, Fred

Well, maybe there's more to it than that. Advent must have been among the first to use foam. Their interest was getting a 2-way speaker to handle the midrange well, up to ~1000Hz. So, they wanted light weight in their nominally 10" (piston diameter) cone. There may have been production advantages too. My GUESS is that if you're dealing with a real woofer (no higher than 400 Hz) the rubber will be a good choice.

definitely curious about this as well

wie macht man das bitte ?

Wieder ein Klugscheißer, der es am Ende aber nicht erklärt. Hauptsache mal gewertet. Vielleicht Fake?!

Good morning, Thanks for your reply. Sorry, the speaker are already sold some years ago, so I really don’t know. Best regards, Fred

Good morning, Thanks for your reply and information. Actually why we didn’t choose grey again for the surround, is that the black rubber of our surrounds has proven to be very reliable. We choose for proven quality of the material instead of in this case the grey coloured material, where we don’t have long experience with. Also, I look to the future, the (original) grey surrounds got already after some years more inflexible as when you bought the speakers at a shop. So, the parameter will change already after some years. With the rubber black surrounds you won’t have this problem. Best regards, Fred

Good afternoon, when the voice coil under the cone is not centered, it will make a kind of rattling sound. That's the coil rubbing against the upper pole plate, and can damage the coil. Best regards, Fred

Guten Morgen, danke für Ihren Antwort. Ich werde versuchen, eine Antwort zu geben. Wenn Sie bestellen, zwingen wir Sie mehr oder weniger dazu, zwischen der Bestellung das Folgende in großer Rotschrift zu lesen: Bestellung BITTE BEACHTEN SIE: Bitte lesen Sie den folgenden Text sorgfältig durch! (Entschuldigung, wir antworten nicht auf Fragen, auf die wir unter bereits vorab eine Antwort gegeben haben.) > Versendung unter normalen Umständen innerhalb von 0-6 Werktagen nach Bezahlung. > Nach dem Versendung erhalten Sie eine E-Mail mit Information von webshop@repairyourspeakers.com, BITTE BEACHTEN SIE IHREN SPAMFIGHTER. In der Zwischenzeit werden wir Ihnen nichts zusenden. Für Porto, Zustellung, POSTZUSTELLZEIT, Ausschlüsse für Länder / Gebiete / PACKSTATIONEN klicken Sie hier. _______ Wenn Sie auf Zustellung klicken, klicken Sie bitte auf den folgenden Link: www.repairyourspeakers.com/de/versand/c-110 3. Postzustellzeit? Bitte beachten Sie, dass der Zoll möglicherweise zusätzliches Interesse an diesem Paket hat, wenn die Sendung Klebstoff enthält. Audiofriends hat keinerlei Einfluss auf die Lieferzeit, und kein Wissenschaft über die Lieferzeit, außer ein korrektes Postpaket anzubieten. Audiofriends ist ein Webshop, wir haben keinen eigenen Lieferservice. Mit Freundlichen Grüßen, Fred.

Good afternoon, thanks for your reply. Actually I'm afraid it's best just to keep the foam out of the sun, warmth etc. I know for instance the Focal tweeters in some expensive speakers have a kind of coating on the foam. If I look at a whole other speaker, the 15 inch Tannoy HPD385 woofer it has a coating too, even at midranges etc. About coating of the foam surrounds I doubt very much that this is to keep the foam okay. It's often to make the speaker the last way to perfect measurements in the mearure room. I myself have years ago refoamed a 12 inch Tannoy HPD315 with coating on the roll. I quess it has some function, but the foam surround was total bad anyway. Sorry, with this one I can't really help you. Best regards, Fred.

Good morning, thanks for your reply. I'm sorry, Audiofriends doesn't repair audio. If I'm right there is a large B&O forum on internet with lots of specialist. If I'm correct it's www.beoworld.com or .org. Best regards, Fred.

It's forum.beoworld.org/

Good afternoon, thanks for your reply. I get the most hits on the word 'glazing tape' : www.google.com/search?q=glazing+tape+for+windows&oq=glazing+tape&gs_lcrp=EgZjaHJvbWUqCQgBEAAYExiABDIJCAAQABgTGIAEMgkIARAAGBMYgAQyCQgCEAAYExiABDIJCAMQABgTGIAEMgkIBBAAGBMYgAQyCQgFEAAYExiABDIJCAYQABgTGIAEMgkIBxAAGBMYgAQyCQgIEAAYExiABDIJCAkQABgTGIAEMgkIChAAGBMYgAQyCQgLEAAYExiABDIJCAwQABgTGIAEMgkIDRAAGBMYgAQyCQgOEAAYExiABNIBCDgxNjBqMGo3qAIAsAIA&client=ms-android-samsung-ss&sourceid=chrome-mobile&ie=UTF-8

Good morning, thanks for your reply. I have looked on the internet for this Focal Chorus 707s speaker. If I look at some larger pictures of the tweeter, it seems to be that als well the inverted dome, as well the outer rim is out of one metal piece. Is maybe the dome or rim damaged, for instance bij a cat or else? Actually I haven't seen a repair kit somewhere. I think it's an idea to contact the manufacturer. Sorry that I can't help you. Best regards, Fred

Good morning, Thanks for your message. The white high density paper rim on the frame has not to be removed. It’s the rim between the mounting of the outer edge of the rubber surround on the frame. Next could be: why? There are different options. I think at least it's part of the design of this Bowers & Wilkens speaker. It may have been used to dampen the resulting resonances of the cone at the outer edge. If it is expected that there will be a relatively large production of certain speakers, manufactures still want to fine-tune them, especially if this can be done in a relatively simple way. That could be possible, I have also seen it with other manufacturers. Best regards, Fred.

@@audiofriends254 Unfortunately I have removed it all, both the papery thing and the sort of silicone ring on top of it. What would you recommend to use in order to restore it?

Good morning, in my opinion it's for humans not hear able if the white thin paper ring in this case is removed or not. The ring is very thin, not as thick as for instance an 11 inch woofer from Acoustic Research. Further, if you might use it, our SP6 glue is very strong, also on for instance metal. We have tested the glue on different surfaces: www.repairyourspeakers.com/en/glue-brush-fluid/c-3. Also if you use other strong glue to mount the surround, I'm quite sure it has no hear able effect. The rubber surrounds are well designed and will give you the sound you want. Best regards, Fred