Видео

Hello! I was wondering, my Alfa Romeo 147 recently started doing really high pitched beep sounds from the passenger side. It only appears when I go into reverse. I cannot explain it, I was told it is the noise when something is wrong with the selespeed/gearbox but there’s no errors showing. No errors on dashboard or when you are reading the car codes. Nothing. What could that be? I have a video, if it helps I can send it somewhere

On my 159 TBi i did it the "lazy" way. I had worn fluid which was still slightly greenish so i extracted it over a week with a syringe and filled it with green Liqui moly hydraulic fluid. So i extracted about 250-400ml in a session, drove the car a bit and repeated till i got about 2,5L and now it's still green after half a year. I just did that as part of preventitive maintance, the steering was fine before i did that but after doing that steering still got a bit better and the engine needs less work to spin the powersteering pump (i heard the engine rev a bit on my parking lot and after changing it wasn't reving as hard and sometimes it doesn't even need to rev at all ;D )

Another cracker - cheers 👍👍

The rear UPGRADED tail light gaskets - seals are now available for sale.

My 159 2.4 jtdm is showing P0403 EGR will this help help my car to regain power as it doesn't reach 2000rpm when driving

Thanks! I broke my brain trying to figure it out myself 😂

Grande máquina!! O meu pai tem um imola de 94, que um dia será meu para restaurar, por curiosidade este video não foi filmado para os lados da Vieira de Leiria?

Job wel done do you got a fiat grande Punto 1 .3 multijet

Hello thank you for your video’s! I need to change my clutch and dualmass flywheel on m’y Audi A3 1.5 tfsi 2018, which brand do you recommend? Sachs,Luk? Thank you

hello again everyone, im looking for extra guidence on what brand for the control arms are reliable?? thank you

👏🏼 bravo - as always!

I was in need of this video , thank you so much 🎉❤

Bonjour j'avais un code erreur p091j'ai changé le filtre a gazoil et j ai effacé le code , problème disparu j ai pense que le filtre peut être le problème

bom dia Sr Bruno..o meu 156 1.8 ts mk1, ja foi mudado o óleo de direção e colocado ate um aditivo, mas de tempo em tempos a direção por vezes fica muito dura, mas se acelerar um pouco ate as 1500 rpm, volta ao normal. o que poderá ser?

Thanks to friend Zaccaro rip 🙏

My Crosswagon and all of them came with this cover from the factory :)

What can cause a vibration in just the first gear of a Fiat Doblo 1.9 JTD?

On forum i read that usually the bad idle could be the connector of the pressure sensor on the rail. I mean for this multijet2 engine, 1.6, 2.0 and 1.9tt.

Not even 100k km and so much damage. Injectors, pump, turbo, dpf 😲 That had to be expensive as hell 😔

Good to see your keeping busy Bruno.

GreAtt work bruno

I wanter to buy MiTo QV, but for less money I could get a very good 159 2.2JTS, which is a much better car. So after 1 year of owning it, I can say that I did not make a mistake. 😄

That is basically a new engine. What had happened for so many main components to fail? 😬

Hi Bruno! I have a question. I have AR 159 SW, 2.0 jtdm, 125 kw EGR off, with softwear 2 Injectors rebulit turbo rebuilt swirl flaps removed Engine runing very vell oil consumption is around 300 ml for almost 5000 km BUT the DPF regeneration is every 300-325 km, oil consumption is around 300 ml for almost 5000 km. Is it OK?

Very Interesting video! Thank U

I do enjoy and like your videos but i think the parts cannon went off on that engine. I'm confident that a new fp regulator and a turbo rebuild would have been enough. I fixed 90% of bad idles on dCi hdi and tdci engines with a new oem regulator.

Então amigo, você recomenda o kit de embreagem Valeo? Você não recomenda Luk, certo? Obrigado meu amigo

Hi this can be the same with alfa romeo 159 1.9 16v? i have no power untill 2000rpm, can u tell me?

Blinding - thanks very much

Thank you for giving people options to try. Really appreciate it

Thank you for this advice, I fix it with just a slightly moving the ECU relay (also doesn't show me any error on diagnostic anymore) and you saved me a lot of troubles. Best regards!

Is this job much different with the selespeed?

❤

What about the outer cv joint of an Alfa 159 is it the same procedure, or it must be hammered out. I have a teared boot and wondering how to fix it with less mess.

Boas amigo, por acaso sabes alguma solução para fazer desaparecer o aviso de mudar óleo do motor no 159? Já mudei óleo e filtros, o mecânico apagou a revisão e deu reset, mas continua a aparecer. Um abraço!

How do you change the gearbox and clutch in Alfa 159 AWD 3.2

Are stabiliser bar bushings (front and rear) on 159 easy to replace?

pls what ist diagnostik ?

Man I wish we got the 2.0L turbo Bussos in Australia. I've had three conventional Bussos (currently a 156 GTA) but would love to taste a different flavour. Though I understand they really only exist because of the punitive displacement-based tax rules in Italy.

Excellent video

amazing so happy i discovered you channel my 159 has D/S upper control arm - worn ball joint, both lower arms worn from what my mechanic has told me. i assume this process you have shown is what is needed??

Hi i have freind with the same engine crank bolt come off and the crank pully is free spining. Its a non interference engine but how can i put the pully back. I dont see notch or smothing to lock the wheel in correct position?

always a pleasure ! thx for ur work and passion

AWSOME VID...GOOD JOB!

164,V6. Turbo???

Advice, please. My 159 1750tbi Ti generates the same sound that only comes on intermittently and only when the AC is on. ruclips.net/video/iPwuZqETne8/видео.htmlsi=ByI7GldhLyJ-FwRB I had my AC serviced 2 months ago (gas and oil mixture top up) I was told that the system is leak free , and for the first 6 weeks, no noise, perfect, this sadly didn't last, and the strange "saw like" noise is back... what can this be? My local alfa people are lazy and don't seem to care. Thank you for the wonderful content you are creating.

Hi bro I have a problem with valve and piston contact in this engine if you could help with your experience I would greatly appreciate.

Abs/esp probably was showing an error because the steering angle needed calibration. It does that by itself (if all is good) within 50-100m of driving the car. The ABS module should Not prevent the engine from starting unless it brings down the whole CAN network due to serious problems, otherwise it doesn't influence the immo functions. Strange that Autel (even the older model you have) doesn't see the ABS module. Just found your channel and seeing you're working mostly on alfas you should buy the multiecuscan. It's very well priced so I suggest you buy the original one - no sense messing around with clones for 50 euro difference. Keep them coming!👍

Bonjour j'aimerai bien savoir ou ont peut trouvé le kit embrayage d'origine valeo pour un 1.9 multiget 8 v fiat bravo 2 .car je trouvé sur internet e je pas confiance . merci

Hi Bruno my condolences to the family and to you as well like you mentioned that at one stage he was your apprentice.A very sad ending to such a precise and informative video.I hope time will sort things out and car will have a new owner maybe then you will carry on recoding from where you stop