- Видео 50
- Просмотров 571 809
Mike Morrison
Добавлен 6 мар 2015
why do you keep getting a broken handle on your Toyota Camry...
This is the third set of Camry handles this car has had and I finally decided to try to figure out exactly why. If you look at your old one you'll see that the ledge is worn away where that angle clip rides. if you put it in a vise and square off that turn with a hammer and whatever else you need (I used a chisel) and try to make it a little bit tighter, it works a lot better. Hopefully this will keep people from pulling on it too hard and breaking it.
Просмотров: 41
Видео
Delta Monitor 1400 or Multichoice Tub Shower Valve Low Pressure Or Not Working Repair
Просмотров 2,9 тыс.2 года назад
This will explain how to back flush the system to clear debris in the valve. Caution: Make sure you have 2 people working with proper communication during this process. One person turning the water on and off at the main valve and one person watching the tub/shower valve area. Make SURE the water is off before you start working on the shower cartridge removal. Be careful because a LOT of water ...
Water Heater Blinking Error Code Reset Honeywell Valve
Просмотров 164 тыс.4 года назад
This is a method to help you try to reset your Honeywell gas valve on your water heater. In this particular instance it was a "7 blinks" (gas control failure) error code. However you can try this for several different codes and it might work for you. It is imperative that you get the water heater pilot flame lit and hold the (round) button in for at least 2 minutes because sometimes if you do n...
How To Fix A Slab Leak Alternative Method
Просмотров 24 тыс.4 года назад
This is just one option on how to fix a slab leak by using the leaking section of pipe under the slab as a sleeve to feed a new PEX line through.
WHAT YOU CAN DO WHEN THE TOILET FLANGE OPENING IS TOO BIG (5" TOILET FLANGE).
Просмотров 2,5 тыс.4 года назад
This is a way to solve the problem when the original 4 inch closet bend pipe in the flange was not brought up to the proper level. I have seen people refer to this situation as having a "5 inch flange" when they're trying to figure it out and they don't understand plumbing. We plumbers know there's no such thing as a 5 inch toilet flange. The 4 inch pipe is supposed to be brought up to the same...
June 1, 2020
Просмотров 484 года назад
Bowflex dumbbells weights adjustment and reset when not working
Best Cat Litter Box System Affordable and Easy Pine Pellets
Просмотров 11 тыс.4 года назад
Make a super affordable cat litter box system using biodegradable pine pellets. The puppy pads I referred to in the video are Member's Mark Pet Training Pads 120 ct Amazon # B016YPTY24.
1/4" Compression Fitting Angle Stop Cap Leaks? Try This!
Просмотров 5234 года назад
If your 1/4" angle stop cap is leaking, try this idea. Tighten it firmly, but do not over tighten it because you can squish the washer to the point where it will ruin it. Good luck.
When the toilet flange is not sealed and is leaking
Просмотров 704 года назад
This is what happens when the tile guy sets your toilet and the seal leaks.
DIY Dunk Tank
Просмотров 3,3 тыс.5 лет назад
This is a great design. A huge shout-out and many thanks to the other RUclipsrs who posted their build videos!
New Glueless ABS Drain Fittings!
Просмотров 2415 лет назад
Latest in the "When Idiots Strike" video series.
How to tighten a garbage disposal collar
Просмотров 18 тыс.5 лет назад
How to tighten a garbage disposal collar
Kohler K-7980 Wide Spread Faucet Square Handle Removal and Replacement
Просмотров 1,9 тыс.5 лет назад
How to replace or remove handles on a Kohler wide spread faucet.
Mouse Living or Trapped in the Washing Machine or ?
Просмотров 6695 лет назад
I can't think of any other explanation other than a mouse....
Dog Door Operation for Small Dogs or Cats
Просмотров 235 лет назад
Dog Door Operation for Small Dogs or Cats
Toilet Tank Keeps Emptying Even With New Flapper??
Просмотров 1575 лет назад
Toilet Tank Keeps Emptying Even With New Flapper??
Funny Frustrated Tile Worker Bad Float Job
Просмотров 2825 лет назад
Funny Frustrated Tile Worker Bad Float Job
DELTA Monitor Tub Shower Valve Cartridge Volume and Low Pressure Problem Solution
Просмотров 28 тыс.6 лет назад
DELTA Monitor Tub Shower Valve Cartridge Volume and Low Pressure Problem Solution
How to manually start a Rain Bird electronic sprinkler valve
Просмотров 6066 лет назад
How to manually start a Rain Bird electronic sprinkler valve
Setting a Toilet with a High Flange Above the Floor
Просмотров 100 тыс.6 лет назад
Setting a Toilet with a High Flange Above the Floor
MOEN White Crystal Deco Shower Valve Handle Removal
Просмотров 2447 лет назад
MOEN White Crystal Deco Shower Valve Handle Removal
Rheem Water Heater BOOM Pilot Light Explosion Gas Ignition Delay Repair Fix
Просмотров 55 тыс.7 лет назад
Rheem Water Heater BOOM Pilot Light Explosion Gas Ignition Delay Repair Fix
MOEN Shower Valve Broken Cartridge Removal Trick
Просмотров 66 тыс.7 лет назад
MOEN Shower Valve Broken Cartridge Removal Trick
How to fix a Dishwasher door that will not stay closed
Просмотров 35 тыс.7 лет назад
How to fix a Dishwasher door that will not stay closed
This is EXACTLY what I wanted to do but the MORONS who piped our house used half inch copper at the split instead of splitting it off with three quarters!!!! And of course…..it’s the half inch line that is leaking….🙄
Works great when the pipe has no kinks on it.
Thank you so much!!!
great job thansk!
Thanks Mike, awesome My wife cracked the door the way she was trying to close the latch Now can be latched easily
Hello Mike! I have I believe this exact machine. I’m into the leather work as well and I need a new belt. Do you know which belt it is?? It seems the belt is too loose. Any tips or anything you did to get this to pump through leather would be greatly appreciated
Thank you for the info. Just helped. Me with my issue
Thank You Mike, Your da man! Have a ge 40 gallon GE called Rheem and after many fireballs and explosions and trial and error, your fix was the solution. After calling Rheem the told me to check distance of pilot but did mention solid part of burner and the 7/32 as a guide. During my strugles with water heater also blew out burner and the screen next to TRD with air & checked the glass vial TRD Now the heater is quiet!!
Is your knob set to PILOT when you're pressing that down?
Please someone market a kit with a removal tool and a puller type for this purpose to save time cobbling together bits and pieces, harbor freight needs to get those little yellow people who makes all their stuff to put something together.
I just fixed my disposal leak tonight with this tip! Thank you so much!
Did you have any angles? You do not want to kink a pex line.
Anyone know of a bottom container that will fit the breeze XL? One that isn’t too high- but high enough. It’s so big, don’t want it really high and unstable.
wife was "how long is the water going to be off??? dang you saved me!
Thank you thank you thank you! After getting the gas turned back on in my house, I was getting the 7 blinks. This completely fixed it!!!!
Thanks Mike, even after all these years your still making a difference 👍👏🎉
Thanks for the hint and your time posting this very useful and effective solution in your video
Thank you.
i think my floor is shrinking, i have a 2 in. gap in the front of toilet base and about an inch in a 1/4 in back, house smells like an outhouse now, i think I need a new sub floor. i bought a foam ring about 6 months ago and i guess its been leaking since then and never noticed until 2 weeks ago, well when i went to put a new wax ring on i noticed the foam one was shredded😮
Such a quick easy DIY fix !! THANK YOU . . THANK YOU . . THANK YOU . .
YOU JUST SAVED THE DAY! Thank you for taking the time to post this!!
I am a plumber but I hate delta and this is why! The little things that could go wrong’
Thank you so much!!!!
Thanks for uploading this. Ran into this today with the notorious NE Philly leak in main bath. Found the 4 main supplies you used at HD for 40$ had to buy a 2’ pice of 4”. Leak is repaired, looked like the last install used about 3-4 wax rings. This seems like a much better option. 👍🏼
So smart
If you don't have four or five minutes to wait, you can unplug the two leads that go into the thermostat, the light will blink for about 15 more seconds before dying out to nothing. Wait another 10 seconds. Plug the leads back in and it should be reset back to a single flash again.
You will need to relight the pilot after performing this reset.
Mike, question. My issue is that ONLY the shower volume is bad, the tub faucet is insanely high, probably too high. If the issue is only the shower head volume, do you think what you have described here, and the other video with the weird little filter cone, could address that? Thanks in advance, these videos are giving me hope.
Thank you for making a very direct video without a lot of unnecessary info.
Thank you so much bro.. Gunna use all that w/ this plumbing license right meow.. Way 2 be one of us.. Big you helped me. T.y.
Dude, you just saved me a $100 plumbing call. Took me 2 minutes and leak is gone.
Good one 👍
This worked for me, thank you so much!
This is exactly what I needed to know thank you
Perfection
One trick... Put the puppy pad on the floor, then put the breeze system on top of the puppy pad. Grab the 4 corners of the puppy pad around the breeze container and then insert it into the home Depot tote. It works better that way.
Noice dude. Wonder how much they went for.
Thanks!!
What tool are you using to cut the piece out? Yes. The pee and the dust lays in there and then gets to stink. I am having that issue. I can't find the Husky heavy duty tote. Do you think any tote that is 10 gallon will work?
Nice vid. Just saved $200. My wife was about to call a plumber and I caught your vid. Quarter inch turn and the water just stopped leaking. I had worked the crap out of the machine a month ago getting a nail out of the inside of the machine and didn't think to cinch it up after working it so hard to remove the nail. Thanks.
Best video I’ve seen for for a low flow and pressure Makes a lot of sense Thanks for making this video
I don't mess with the puppy pads--- just empty it a little more often and I COMPOST mine-- so I just take it out and pour it around my roses-- then throw some "potting soil" or " miracle grow" dirt in on top of it--- and I squirt the inside of the box with my sprayer that has WATER- with a few spoons of VINEGAR in it-- and let it air dry -- it will evaporate quickly!! if you STILL get smell-- then put a little layer of the potting soil in the bottom first-- and you can let it go longer with NO smell... compost it all-- makes BEAUTIFUL roses... !!! Then spritz it with the vinegar/water mix and let it air dry.. (NO PADS-- no muss, no stink= and beautiful roses)
I did wonder if the sawdust waste can be used for mulch. It has such a nice consistency. I could try mixing it with potting soil. My concern is will it attracts ants, other bugs or feral cats.
Fixed my problem!
I appreciate this. Thank you.
godsend video. thank you! so tired of air gap backflow happening with my new dishwasher installation due to the kink in the drain hose. this 90' elbow is the perfect solution.
I think it’s because you talk more then work. I’m getting annoyed with it. Just put the dam toilet together.
Thanks! After two tries, worked great. Thumbs up👍
Thank you!
good job
Where can I buy a replacement cartridge that looks like the skinny one in the video? I am desperate! I don't see a serial number or anything on it.
MOEN 1200. It is available on Amazon or at Home Depot: Model#: 1200 Sku#: 240375 Internet#: 100445056
Yes it did