Видео

Thank you for the clear video. I followed the same steps for my Lelit Bianca v3 and it was an easy job. Putting the level in the middle position before disassembly was a great tip which saved me a lot of time. I was able to easily put the cam back in, and the whole process just took about 5 minutes.

Are you using the 14-18g basket or the 18-21g basket?

I noticed strange behaviour: when I put a blind filter during group cleaning operation, it shows exactly 9 bar. But when I am making an espresso, at the begining of extraction the presure goes up to 12 bar, sometimes even to 12,5 bar, and during the extraction it slowely goes down to 10 bar. I set up 3 seconds of prefusion, it might affect the presure, I don't know.

Thanks for the video! My Elizabeth set to 10.5 bar as I bought it from official store. Wonder how much I need to adjust to make it exactly 9 bar.

Great review, very nice

Bonjour @stefanusGoana , merci pour tes vidéos ! J’ai finalement l’intention d’acheter Elisabeth. Pourrais-tu me donner un conseil concernant l’achat d’un moulin ? Je me fiche de toutes les options de contrôle (minuteur, etc),. Je préfère privilégier la qualité du système micrométrique pour la précision et la qualité finale du broyage du café. J’ai un budget d’environ 400/450$ pour le moulin. William serait un parfait mariage avec Elisabeth, mais la qualité du système micrométrique ne me convainc pas. En revanche, si d’après ton expérience, tu trouves que la précision granulométrique est suffisante malgré la mauvaise qualité du système micrométrique, je me baserai sur ton avis. Sinon, aurais-tu un moulin à me conseiller ? Je te serais très reconnaissante si tu pouvais me conseiller. Merci encore pour toutes tes vidéos qui m’ont finalement convaincue d’acheter Elisabeth 🙏 Cordialement, Marie

Merci pour cette vidéo, j’hésite justement entre ces 2 machines.

Can you write down the unscrew device? The type and number

It's hard because you used the wrong tool 😢

Thank you for the video. The steam power from this machine is very good for home use, but it cannot be compared to commercial machines 😊❤

What do you think about this vs the pro silvia x

Hi, Stefanus I own the Elisabet and I'm very happy. I like your advice as I heard Elisabet has a cleaning program if so what Bottom do I have to press/ The flash program I know but how many times I have to do it? Once a week? I use the machine 4 times a day.thank you

I just found your RUclips channel and I already love your videos super informative and you’re convincing me to buy an lelit Elizabeth.

Felicita is such a knock off of Acaia lunar

Hi, thank you for the video! I have just discovered your channel. 😊 Do you know if the amount of water that is coming out from the dispenser can be somehow programmed? Thanks

Is it enough to just change the lcc on my elizabeth v2 machine to use the lcc features in lelit elizabeth v3?

Mohon arahan Bang, apakah PID di Lelit Anna 2 itu sama fungsinya dg Lelit Grace?

Great Video, I just bought the Mara X, I wanted to get the Elizabeth but everyone has been sold out for some time and I got the OK for new machine but could not find Elizabeth and the Bianca is just to big for my counter so settled for Mara X on sale in U.S. $340.00 Off

If you need the correct wrenches for the metric system, use the 23 mm and 27 mm sizes.

Finally looking real hard at the Elizabeth, just watch vedio on checking PID Temp on Elizabeth, looked like what was on machine and portifilter temp probe test were real close and for home users I think the Elizabeth is the way to go and for me it fits my counter space bester than lets say the Breville DB. Thanks again for the video :)

The timer is simply missing on mine. Can it be an older model or? Firmare version is 1.14c

Gaggia Classic 2023 atau Lelit Anna 2? Mohon pencerahan Pak Stefanus dan Suhu lainnya...

Stefanus, you are brilliant consulting me much more that instructions in manual. Keep going!

IS there a option to see the actual temperature in the steam boiler like the temp of the water boiler?

Thanks for a very clear and informative video. I have the same model machine and now the power button appears faulty - it will now only stay on if the button is kept pressed in by hand. I have taken the top cover off and checked that the button and connectors are firmly in place. The parts diagram shows it's part number is 9600052. Any ideas or information on this fault would be appreciated. Also, do you know where I could order the part number from (I am in Australia)?

Merci pour votre vidéo qui m'a éclairé sur ce point encore complexe à comprendre car je ne pratique pas le latte art tous les jours 😅

57,35mm

apa perbedaan lelit Anna dan Grace?

Thank you!

I can answer to the PID. KPc is the constant that multiply the setting temp minus the actual temp. Proportional term, the higher you get the more reactive will be the machine to maintain and reach the temperature. Total resulting power to the boiler = Power 1 + 2 + 3 Power1 = (SetupT - ActualT) x KPc KIc is the integral term meaning it sum the error over time. It is usefull for finely adjust temp over time. Power2 = integral over time (SetupT - ActualT) x KIc For ex if your temp error (SetupT° - ActualT°) is few deg, the actual power1 could not be enough, so every second that error is there it will be multiplied by KIc and added to power1. We call that eliminating the traling error. KDc is the derivative term. It check the variation of the error Power 3 = (SetupT - ActualT) x KDc This parameter enter in the game when there is strong variation detected, either by changing your setting T° or because the boiler refill and an error build up fast. Do not get to high on this parameter as with inertia the T° will be unstable or at least having overshoot on the T°

FAR to much water at steaming. Unfortunately I discovered that after purchasing it :-(. Actual completely useless.

Can we use bit of petrolium jelly instead

You talk nicely and explain it so well. Continue making these videos. Thx

i have this grinder. when i recently took it apart to clean it out and put it back, my grinder step is now set between 10 and 1. this is "area" which grinds the best for my beans, however, it makes it very difficult to make adjustments since it's in that "undefined" range and not on a specifc number. is there a "top dead center" or zero out the adjustment so that it starts somewhere in the middle, like 5-6?

Great video! Where can I buy steam wand tips for Lelit Anita?

Thanks a lot for this video :)

Because of that delonghi dedica on sale on store I just did wanna try it till then it's unending purchase on next level premium feel upgrades, accessories, scale and damn SSP burr grinder🤑😜🤑😜

Thanks for your video !😊

Hi Stefano, I'm torn between purchasing these two grinders. Can you confirm that the William has a higher grind than the Eureka? I drink 3-4 coffees a day (with a Gaggia Evo Pro), which one would you recommend? I thank you so much!

Bought the Anna with PID but man that Mara is just 👌🏼🔥

Hi, thanks for detailed explanations. Can I adjust the bar pressure on this machine like ECM casa V does (adjustable bar pressure)

!!!!!!!! 🎉

Can this be good for a small cafe? Thanks!

Thank you! Can you give me advise please, how to properly make two cups of cappuccino with this machine, at same time, for example we wake up and want to drink same time two cups cappuccino with each other. I know the boiler is 250 ml, and different tempratures from espresso/steaming milk, waiting for heating and cooldown can be annoying maybe, so how to make it wright for the drink and for the machine..?

Thank you so much!

Hi! can you help me with the frothing process? do you always keep the tip of the steam wand in the same position? I'm not being able to improve mine. thanks!

Like ur coolness on the morning . I wish i had more time to refine my coffee

Thank you for sharing! I actually have this issue myself. I have only own this machine since June 2023. How do you change the steam tap? Kind of sad, i've own a Silvia V2 for 10 years and on the 7th i had to replace one thermostat. EDIT: Sorry i see the part number, couldnt see it on my phone its Part number 2200075 if anyone else had crap vision like me.

I can't tell you how much this helped me! I bought the lelit anna used and had no idea the steam wand had a removable sleeve. Removing this sleeve and following your pitcher position I can finally get my milk to vortex!

How good is the cup warmer?