Nikken 5 AX-201 4/5th Axis Table Fitted on a Dugard 1000Y Plus VMC

Nikken 5AX-201
Despite it's size the 5AX-201 offers unrivalled high precision, high rigidity and durability, making this tilting rotary table the ideal compact solution.
With pneumatic clamping, this rotary table comes with various attachments providing high accuracy with maximum clearance, at an affordable price. Built-in type 4 ports rotary joint can be attached as an option. Like all NIKKEN products, the 5AX-201 is designed for easy maintenance and longevity.
5AX-201
Face Plate Diameter[Ømm] 200
Table Range/Type COMPACT
Diameter of Spindle Hole [Ømm H7] 60
Number of Spindles x Pitch [mm] 1
Centre Height (90°) [mm] 180
Table Height in Horizontal Position (0°) [mm] 260
Width of T Slot [mm] 12
AXIS Rotary Tilting (0°-105°)
Clamping System AIR/HYD AIR/HYD
Clamping Torque [Nm] 303/588 303/612
Table Inertia at Motor Shaft [Kg m2 x 103] 0.11 0.16
Servo Motor [min1] αiF2·2000 αiS4·2000
Min. Increment [Degrees] 0.001 0.001
Rotation Speed [min1] 22.2 16.6
Total Reduction Ratio 1/90 1/120
Indexing Accuracy [sec] 20 60
Indexing Accuracy Ultra Precision [sec] - -
Net Weight [Kg] 160
Max. Work Load on Table 0° to 30° [Kg] 60
Max. Work Load on Table 30° to 90° [Kg] 40
Max. Thrust Load at Table Centre - Tilting Angle = 0° [N] 9800
Max. Thrust Load 'F' @ 'Lmm' from Table Centre - Tilting Angle = 0° [N] F4900 @ L=100
Max. Thrust Load 'F' @ 'Lmm' from Table Faceplate - Tilting Angle = 90° [N] F5880 @ L=0
F2940 @ L=100
Strength of Worm Wheel Without Brake (Against Dynamic Cutting Thrust) - Tilting Angle = 90° [FxL Nm] 382
Max. Work Inertia [Kg m2] 0.5
Driving Torque [Nm] 72
Dugard 1000Y+ Direct Drive Vertical Machining Centre
Standard Specification
Made in Taiwan
Heavy duty rollerways
20 bar through spindle coolant
Swarf conveyor and bin
X axis traverse 1020mm
Y axis traverse 610mm
Z axis traverse 510mm
Table size 1200 x 610mm
Max table load 600kg
Spindle nose line to table surface 130~680mm
Spindle centre line to column 665mm
Max feed rate Fanuc 15m/min
Rapid traverse rates X/Y/Z 36/36/30 m/min
Speed range direct drive (refrigeration unit) 80~12,000rpm (15,000/20,000rpm opt)
Direct spindle drive 18.5kW Fanuc
20.9kW Seimens
17kW Heidenhain
Spindle taper (Big Plus double contact system) BT40 (opt CAT flange)
Bi-directional twin arm type auto tool changer 30 station (40 opt)
Max tool diameter 76mm
Max tool length 250mm
Max tool weight 7kg
Tool change time tool to tool 1.5 seconds
Machine weight 7000kg
Standard Equipment
20 bar through spindle coolant
Swarf conveyor and bin
Rigid tapping
Helical interpolation
Spindle refrigeration
Heavy duty roller linear ways X, Y & Z
Heavy duty high quality cast iron frame
Twin nut, double supported pre-tensioned ball-screws 40mm dia
Counterbalance head
High power coolant system
Fully enclosed guarding
Chip flushing system
30 x set of pull studs
Automatic lubrication

[@adams4100]

Nice video showcasing it cutting fresh air 😑

[@QuangHung-zb2cp]

Nikken koshakusho japan.