How's Your Emergency Food Reserves? mypatriotsupply.com/pages/rs-wranglerstar?rfsn=2802221.8b4969&subid=wranglerstar LINK TO WILTON VISE - amzn.to/2Pq5THr (amazon affiliate link)
I have an old, unmarked swampy green vise that my dads friend gave him, and I would love to find out where it came from and what brand it is, if I manage to give you the markings on it, can you look into it?
Jeff (aka the Real Martian here) I have the most amazing neighbor...and Mike...you da'man Mike..that vice is awesome. I can't wait to get it installed and start using it. Wow that's going to make the work we are doing so much better. This bench is going to be the center piece of the new shop setup...so cool...so grateful...#awesomeneighbor #blessed #thanks
Man what a gift. In this day and age people are not this generous with their resources and time. I am impressed with what Cody did for you and your genuine appreciation and gratitude said it all. You could definitely tell that it meant the world to you. Have fun with your new toy and Cody, what an awesome thing you did for Jeff.
I have to say your videos are on another level these days. especially the camera work. there's so many youtubers that stick with a single camera, single shot setup for years and years without any improvement. It's good to see you care about the craft of making videos as much as any craft you take on. Cheers from New Orleans!
Cody, your right about the importance of a good vise! I inherited a 1949 Wilton 6 inch torpedo style vise from my Grandfather. I completely restored it and was able to replace the jaws too. I used extra thick O-rings on the adjustment handle as bumpers like the newer vises have. Every time I use it I remember my Grand Dad and all he taught me. He was a Wisconsin diary farmer born in 1900. He was a great story teller!
Thanks Cody for this video. I had no idea that mounting a bench vise on the corner of the bench, and also close to the edge, is very important, to get full functionality. Whenever I start a project, even a minor one like installing a bench vise, I spend 30 minutes or so watching RUclips videos. It's helpful videos like yours that make RUclips so informative.
What a thoughtful gift for Jeff that you created, along with help from viewer Mike. We've been going through a series of messages this month in our church. I think the most relevant passage for this gift of generosity could be summed up by the author in 1 John 3:16-18. John is basically saying "Talk is cheap." Let's not just say we love one another, let's demonstrate that we love one another by being generous to each other. This is one of the reasons that I love supporting this channel, because you are generous with your time and your moments of your family, being a beacon of good stewardship and an example of a godly man in a world full of despair.
I've watched hundreds of Wranglerstar videos and this one, for some strange reason is my favorite. For these reasons: 1. A generous donation to the project. 2a- the shot of having to feed wire while welding 2b. A "change of plans" by using hole punches and then grabbing the plasma cutter. 3. Trying to hold the washer without vise grips first 4. the surprise visit for the surprise (so wholesome) 5. the "test" using your nicknamed cheater bar and just body weight. 6 the quick math and the advice that is always you can do it confidence and 7. the blessings and prayers ending. This video is a shorter one, but it packs in all of the wholesome -human- do-it yourself genuine content that I've grown to love. I also notice it was just a few weeks before the pandemic-mania really started. anyway I have learned so much from watching your content- I feel it makes me a better man, husband, and father just to soak in your experiences you've so graciously shared. Thank you Mr. W (and Mrs W.) for sharing it all. Merry Christmas to you and your family and may Christ's love be more plentiful this new year. God bless.
There's no other youtube-channel where I learn as much and enjoy as much than Wranglerstar! Really enjoy your content Cody! Will keep you in me and my family's prayers 🙏🙏 God bless you 🙏
Good neighbors are what rural living is all about. For some reason they are fewer and far between in large cities. Way to go Mr. W. All the best to you and yours.
I mounted my 4 Inch Wilton to my stainless steel workbench I have in my shop a few years ago! My table is aluminum so I didnt need the plasma cutter LOL I just drilled it. Thanks for sharing! That is a nice vice!
Love the bench! I agree, do it right do it once. Little more time and effort make the world of difference in the end.
4 года назад
I too have a very similar Wilton. What sold me on it was the positive locking feature of the swivel. My previous vice was just a friction type, always willing to turn under load. The positive locking dogs prevent that perfectly.
You have helped me with so many things. Thank you for your knowledge. And thank you for you honest reviews. Your videos just get better and better. Thank you for you time and hard work on them.
I got a vintage Wilton 6in vise that looks similar to that one but it's made in the USA. I got it on offerup, the guy advertised it for $100 and I offered $50 thinking he would say no and he said okay. I degreased it with acetone and sanded it with a flap disc on an angle grinder. Then painted it with international harvester red tractor paint rattle can. I mounted it with half inch diameter carriage bolts which looks really nice and holds it really well. Mine is mounted through wood though but it is an inch and a half thick so it's pretty solid. The trick to getting a good deal on OfferUp is when you see something don't make an offer right away if it just got put on. Wait for about 1 to 2 weeks and then make a lowball offer. They will either accept it or give their own offer which will usually be pretty fair. The way people try to price some of them things on there you kind of have to do that.
Hey man, not much of a religious person, in fact you could probably call me anti-religious in that I really can't find much of a redeeming value in the major religions. But folks like you, honest, truthful, doing good in this world and helping others out, you embody the spirit and the ideals of what religion should be. And it is becuase of that I will continue to subscribe, watch your videos, enjoy your content and keep you in my thoughts.
I made a bench out of dead tree carcasses a couple years ago. I ended up dropping close to $400 on it. It is way over built, on leveling casters, has my router table and mitre saw on opposite sides of the table to provide extra support. The height is perfect for my table saw and planer to use it as an out-feed table. Top has 3/4" MDF and then a 3/4" maple plywood on top. Works great, wish I had built it out of steel now that I've gotten in to welding. Might ought to see if I can sell it and recoup some of my money to build a nice steel one.
Hello Cody from coastal Virginia. I don't think the steel top price was too high. Excellent work on the bench and excellent work helping out a neighbor. I know you throw some hate ( joking I presume) to us east coast guys but we definitely share the same core values and sense of community. Hats off to you for all of your good work. I've learned a lot from you through the years. Keep it shiny side up buddy.
Im sure youre much more knowledgable than i am. But i do know that if you start your plasma torch cuts at an angle you will save the electrode a lot longer. Starting your cuts directly on the metal will mushroom out the electrode in the torch a lot faster! Love the videos thanks for awesome content.
I am building a shop right used two 40' containers bought a dome shaped rood, its all closed in cement ready for epoxy. I just picked up an used Wilton vice in good shape. got an Everlast combo welder so I have plasma and tig. I already had mig welder. all I need is a nice work bench ... when can you come visit sunny Ca to help build a nice table.
As a God fearing husband, father and jack of some trades who both appreciate our own opinions - I appreciate you. You do not let anyone sway you from your convictions, nor do you force them on others. How you deal with your family is up to you - and them. Thanks for being true to you.
Only a West coast guy shows only the ONE pretty weld of a project. 🤣 Aside from that I think it's awesome that you're helping out your neighbor like you are.
HELLO, from chihuahua mexico, from the bottom of my heart I can tell you, you are a good human being and your subscriber for the donation, for that and all GOD BLESS YOU AND YOUR FAMILY.
I fully agree a good bench and vice is a first must have in a shop space. There is one small thing that should have been added under the vice. That was a support wedled to the outer edge of the sheet steel down to the leg of the bench. A 6 inch piece of 1/4 x 2 flat bar is all it needs to be. If you want to get fancy drill some 3/4 inch holes in the leg where the flat bar would be. Slip the bar inside the leg and up to the sheet. Weld the bar to the sheet and plug weld the holes in the leg. Yeah, yeah, yeah, I know it may not be needed... but it will keep that end from flexing under abuse most shop vices tend to see.
Looks like to tightened the base bolts to "bug eye" torque (till your eyes bug out). But was that Imperial or Metric "bug eye"? Thanks for another great video!
I'm in a seniors apartment building, I tinker and I wish there was a work shop with a bench, vice and belt sander. I used to go to the hobby shops on a Marine base, but Obama canceled funding. So think of the old, retired guys.
I had read that when mounting a vice, put it on the opposite side from your strong hand. In other words, if you're right handed, mount it on the left side, and vice versa. i did that when I built my welding table and it actually "feels" better than a vise on my strong side.
Matthew Andrew I never heard or thought of that but now that you mention it, it sure would be handy to have all that table top space for me to set the tools down on...on my dominant hand side. 🤔 Good call.
My similar 6" Wilton purchased some 39 years earlier, and still my only garage shop vice, required an immediate upgrade. This one may not. I used the largest diameter grade 8 bolts inserted up from the bottom, with washers and grade 8 nuts on top, in order to solidly lock the swivel top section in place. Only then with a box wrench, could I apply the needed tightening force that the T-handles with a cheater could not, as they bent. I ground away the bolt head interference underneath, rather than use a smaller diameter bolt. Also, the protruding interference was reduced.
i have 2 vises one mounted normal position the other is mounted vertical so the tighting lever is on top this works great for holding flat plate when cutting it
Thankyou for sharing God Bless and what Wranglerstar said is right just get a stick you can use them they aren't that hard to use I learned to stick weld at 12 or you could go to harbor freight and get a mig welder for like 100 bucks
Praying for you and your family, Cody! Watching your videos is always a joy and inspiration. Thank you you for all you guys do to make clean inspirational videos with good values. May God Bless Your Family
Up next "The cheapest Magnetic base Drill Press on Amazon"..... Actually, Cody, I'm surprised you don't own one, with a nice set of Annular Cutters... Just saying... Wink Wink...
"Up next "The cheapest Magnetic base Drill Press on Amazon"..... " Here you go. www.amazon.com/Mophorn-Magnetic-Diameter-Drilling-Portable/dp/B07M9Y3JCH/ref=sr_1_49_sspa?keywords=Magnetic+base+Drill+Press&qid=1582663428&sr=8-49-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFQVzBCUzlCQklPT1YmZW5jcnlwdGVkSWQ9QTA2NzQzODczNEpFNkRYUTY0M1VCJmVuY3J5cHRlZEFkSWQ9QTA2MTA4NTk0Mlc1STRGTEtFVTEmd2lkZ2V0TmFtZT1zcF9hdGZfbmV4dCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
so after using plasma cutters a bit, would you haul a 110v power supply and compressed air out in the field for a project, or would you take the oxy/acetylene torch
How's Your Emergency Food Reserves? mypatriotsupply.com/pages/rs-wranglerstar?rfsn=2802221.8b4969&subid=wranglerstar
LINK TO WILTON VISE - amzn.to/2Pq5THr (amazon affiliate link)
I have an old, unmarked swampy green vise that my dads friend gave him, and I would love to find out where it came from and what brand it is, if I manage to give you the markings on it, can you look into it?
Ha! 😂😂 That is a well deserved call out. It is a hot mess for sure. Thanks for watching; I truly appreciate it 🇺🇸
You guys should collaborate on a video.
You guys need to do a video together!
@@Rogers1911 agree
@@Rogers1911 Indeed
Did you fix your vice?
Jeff (aka the Real Martian here) I have the most amazing neighbor...and Mike...you da'man Mike..that vice is awesome. I can't wait to get it installed and start using it. Wow that's going to make the work we are doing so much better. This bench is going to be the center piece of the new shop setup...so cool...so grateful...#awesomeneighbor #blessed #thanks
We are going to need a video of the bench on your channel too. Show us all the cool things you're going to make on it!
Man what a gift. In this day and age people are not this generous with their resources and time. I am impressed with what Cody did for you and your genuine appreciation and gratitude said it all. You could definitely tell that it meant the world to you. Have fun with your new toy and Cody, what an awesome thing you did for Jeff.
i bet real estate prices have gone up after Cody has been living there being so neighborly
I have to say your videos are on another level these days. especially the camera work. there's so many youtubers that stick with a single camera, single shot setup for years and years without any improvement. It's good to see you care about the craft of making videos as much as any craft you take on. Cheers from New Orleans!
With 1.46 m subscribers he can afford buying more and better cameras
@@midwestguy3361 and those cameras came with a full suite of cinematography and video editing classes?
Cody, your right about the importance of a good vise! I inherited a 1949 Wilton 6 inch torpedo style vise from my Grandfather. I completely restored it and was able to replace the jaws too. I used extra thick O-rings on the adjustment handle as bumpers like the newer vises have. Every time I use it I remember my Grand Dad and all he taught me. He was a Wisconsin diary farmer born in 1900. He was a great story teller!
Best laugh I’ve had in weeks! First the gloves and the “Caught my foot on fire!” Doh!
Whenever you wish “God bless you and your family” in the videos, that also means so much me. Keeping you and your family in my prayers.
I agree it so genuine
I wish his prayers worked for me...
Thanks Cody for this video. I had no idea that mounting a bench vise on the corner of the bench, and also close to the edge, is very important, to get full functionality. Whenever I start a project, even a minor one like installing a bench vise, I spend 30 minutes or so watching RUclips videos. It's helpful videos like yours that make RUclips so informative.
What a thoughtful gift for Jeff that you created, along with help from viewer Mike. We've been going through a series of messages this month in our church. I think the most relevant passage for this gift of generosity could be summed up by the author in 1 John 3:16-18. John is basically saying "Talk is cheap." Let's not just say we love one another, let's demonstrate that we love one another by being generous to each other. This is one of the reasons that I love supporting this channel, because you are generous with your time and your moments of your family, being a beacon of good stewardship and an example of a godly man in a world full of despair.
I've watched hundreds of Wranglerstar videos and this one, for some strange reason is my favorite. For these reasons: 1. A generous donation to the project. 2a- the shot of having to feed wire while welding 2b. A "change of plans" by using hole punches and then grabbing the plasma cutter. 3. Trying to hold the washer without vise grips first 4. the surprise visit for the surprise (so wholesome) 5. the "test" using your nicknamed cheater bar and just body weight. 6 the quick math and the advice that is always you can do it confidence and 7. the blessings and prayers ending. This video is a shorter one, but it packs in all of the wholesome -human- do-it yourself genuine content that I've grown to love. I also notice it was just a few weeks before the pandemic-mania really started. anyway I have learned so much from watching your content- I feel it makes me a better man, husband, and father just to soak in your experiences you've so graciously shared. Thank you Mr. W (and Mrs W.) for sharing it all. Merry Christmas to you and your family and may Christ's love be more plentiful this new year. God bless.
All the best to you and your family. There is no better gift than the gift of your time.
Praying for you and yours daily Cody. Thanks for another great video!
There's no other youtube-channel where I learn as much and enjoy as much than Wranglerstar! Really enjoy your content Cody! Will keep you in me and my family's prayers 🙏🙏 God bless you 🙏
The excitement/joy in Jeff's reaction was well worth. That's what good neighbors/friends are for.
I've grown to really love your channel. I personally like the axe restoration videos. But they are all good.
Very kind of you to build the bench and add the vise..Thank you for the video..Have a blessed day..
Well, that was a very kind thing to do building that bench for your neighbor.
You have great skills. Enjoy your videos.
delivering joy is a blessing to Jeff and all of us
thank you
Good neighbors are what rural living is all about. For some reason they are fewer and far between in large cities. Way to go Mr. W. All the best to you and yours.
Nice job Cody. What a good guy to help your neighbor. And your subscriber who got the vice
God bless both of you.🌹🇺🇸♥️
The pure look of true heartfelt gratitude on your friends' face was priceless.
At 11.28 the lighting and how you pieced that together is some of your best lighting, camera & vid editing!
Always Praying for You and your Family !!!
Funny marking the center for drilling and then using a plasma cutter.
Pro move, for sure! :D
Also holding the washer with his hand right next to the plasma cutter lol
I am not smart,
Wranglerstar at least you moved your fingers on the bottom side before pulling the trigger
Oh no. No offense! Changing plan while working is normal! Just funny to watch.
What a great video, God Bless you and your family Cody, you are all great people.
Jeff, round the corners off dude, they will HURT your hip!
Cheers from Tokyo!
Yes, those will hurt your hip in America too.
I can't imagine the havoc they'd wreak on Mike Bloomberg's nipple!
As if he'd ever be that close to a workbench...
@@MetalAsFork
Nah, they'd poke his eye out. 👀😄
@@Bob_Adkins y9
My grandpa had that same vise for the last 10+ years of his life and now it’s moved onto my family. Very nice heirloom
I mounted my 4 Inch Wilton to my stainless steel workbench I have in my shop a few years ago! My table is aluminum so I didnt need the plasma cutter LOL I just drilled it. Thanks for sharing! That is a nice vice!
What a nice man. Need more like him, and Cody of course.
I want you as my neighbor Cody, what a lovely gift and gesture 👏
Enjoyed the build and looks like your friend Jeff is a deserving sort of fellow. Thanks Cody.
Love the bench! I agree, do it right do it once. Little more time and effort make the world of difference in the end.
I too have a very similar Wilton. What sold me on it was the positive locking feature of the swivel. My previous vice was just a friction type, always willing to turn under load. The positive locking dogs prevent that perfectly.
I'm digging that washer trick with the plasma cutter.
You’re a very kind hearted man indeed. Regards from Western Australia.
I used a transfer punch with my vise, drilled and tapped my table top. Worked like a charm.
The best of all seeing the smile on Jeff's face.
man its really a great feeling to give someone something they really needed. his reaction was so heartwarming good work Cody !
You have helped me with so many things. Thank you for your knowledge. And thank you for you honest reviews. Your videos just get better and better. Thank you for you time and hard work on them.
Your a awesome neighbour Cody. Gods watching you.🤝
Nice job Cody. Thanks for the vise mike.
Burned his hand. Caught his boot on fire. My wife asks: Are y’all kin?????
This didn't happen.
Gary, You win the comment of the day award 🍾🍾🍾
I don't think so, Tim.
I got a vintage Wilton 6in vise that looks similar to that one but it's made in the USA. I got it on offerup, the guy advertised it for $100 and I offered $50 thinking he would say no and he said okay. I degreased it with acetone and sanded it with a flap disc on an angle grinder. Then painted it with international harvester red tractor paint rattle can. I mounted it with half inch diameter carriage bolts which looks really nice and holds it really well. Mine is mounted through wood though but it is an inch and a half thick so it's pretty solid.
The trick to getting a good deal on OfferUp is when you see something don't make an offer right away if it just got put on. Wait for about 1 to 2 weeks and then make a lowball offer. They will either accept it or give their own offer which will usually be pretty fair. The way people try to price some of them things on there you kind of have to do that.
Thanks for the smile today. I enjoyed seeing him see the table for the first time.
LOVE AND RESPECT >> PUTTING ON MY OLD FOOTBALL SPIKES DIGGING IN AND HELPING TO HOLD THE SPEAR >>> THANKS CODY
Wow. There's nothing like the smile, no GRIN, of someone when you give them something special. It really is better to give than to receive.
Good job. You could be a “vise cop” and fix bad vise installs. I always listen to your ad vise.
Bought this same vise at Christmas it's been great so far
wranglerstar daddy likes flannel daddy thats the best news I've heard in long time
Loving the project thus far!
Forgotten weapons is also a good channel, if you're down to nerd out of a weapon and let's be honest who doesn't.
I second this, great channel!
Ian has long been a pillar of the RUclips gun community. Even more so after joint forces with Karl and founding InRange TV.
Agreed. Garandthumb has got to be my favorite gun channel. I also love TRexArms/Lucas Botkin
Turned out amazing your neighbor is going to love it @wranglerstar
Hey man, not much of a religious person, in fact you could probably call me anti-religious in that I really can't find much of a redeeming value in the major religions.
But folks like you, honest, truthful, doing good in this world and helping others out, you embody the spirit and the ideals of what religion should be.
And it is becuase of that I will continue to subscribe, watch your videos, enjoy your content and keep you in my thoughts.
I know you hate jump cuts, but you did great with this one Cody. Also, THANKS MIKE(!) for the donation!
Great video! Very cool! Everything rust in my basement, so I built my bench out of treated 4x4's and treated plywood.
I made a bench out of dead tree carcasses a couple years ago. I ended up dropping close to $400 on it. It is way over built, on leveling casters, has my router table and mitre saw on opposite sides of the table to provide extra support. The height is perfect for my table saw and planer to use it as an out-feed table.
Top has 3/4" MDF and then a 3/4" maple plywood on top. Works great, wish I had built it out of steel now that I've gotten in to welding. Might ought to see if I can sell it and recoup some of my money to build a nice steel one.
Awesome project ... price Lee to see Jeff’s expression and response 👍🏻
Nice tip on mounting location to allow for material vertical clearance.
I don't drink, smoke or gamble... the Wranglerstar channel is my vice! ;)
Nothing better than great neighbours !
Hello Cody from coastal Virginia. I don't think the steel top price was too high. Excellent work on the bench and excellent work helping out a neighbor. I know you throw some hate ( joking I presume) to us east coast guys but we definitely share the same core values and sense of community. Hats off to you for all of your good work. I've learned a lot from you through the years. Keep it shiny side up buddy.
Forgot to say also that we pray for yall every time we see a video. Please do the same for us. Thanks Cody!!
Yes!
I've been thinking about you all today.
Im sure youre much more knowledgable than i am. But i do know that if you start your plasma torch cuts at an angle you will save the electrode a lot longer. Starting your cuts directly on the metal will mushroom out the electrode in the torch a lot faster!
Love the videos thanks for awesome content.
I love my old craftsman vise that I got from a buddy’s Dad’s shop. $75 and it should last the rest of my life 💪
You guys got a good neighborhood. 👍🇺🇸
Nice job. Very nice for you to make that table for your friend.
Mrgunsngear is number 1 on my list of favorite channels.
I am building a shop right used two 40' containers bought a dome shaped rood, its all closed in cement ready for epoxy. I just picked up an used Wilton vice in good shape. got an Everlast combo welder so I have plasma and tig. I already had mig welder. all I need is a nice work bench ... when can you come visit sunny Ca to help build a nice table.
As a God fearing husband, father and jack of some trades who both appreciate our own opinions - I appreciate you. You do not let anyone sway you from your convictions, nor do you force them on others. How you deal with your family is up to you - and them. Thanks for being true to you.
Cody, You are the best!
Only a West coast guy shows only the ONE pretty weld of a project. 🤣 Aside from that I think it's awesome that you're helping out your neighbor like you are.
East coast guys no longer weld because they all have diabetes
Love that John Moreland intro
Am I the only one that thought he was gonna say "That's a good looking bottle of Locktite!"?
Man, that loctite stuff is just really swell. It really just works. Love this stuff. Isn't it great.
I was about to say "There's the gratuitous and obligatory Loctite product placement."
No offense...just fun and games 🤣😂
HELLO, from chihuahua mexico, from the bottom of my heart I can tell you, you are a good human being and your subscriber for the donation, for that and all GOD BLESS YOU AND YOUR FAMILY.
I fully agree a good bench and vice is a first must have in a shop space.
There is one small thing that should have been added under the vice. That was a support wedled to the outer edge of the sheet steel down to the leg of the bench. A 6 inch piece of 1/4 x 2 flat bar is all it needs to be. If you want to get fancy drill some 3/4 inch holes in the leg where the flat bar would be. Slip the bar inside the leg and up to the sheet. Weld the bar to the sheet and plug weld the holes in the leg.
Yeah, yeah, yeah, I know it may not be needed... but it will keep that end from flexing under abuse most shop vices tend to see.
Looks like to tightened the base bolts to "bug eye" torque (till your eyes bug out). But was that Imperial or Metric "bug eye"? Thanks for another great video!
I've been looking forward to seeing Jeff's reaction.
Prayers to ya! God is Good and watches over His Warriors.
Awesome! His reaction is worth all the work. Way to help your fellow man!
Awesome Video.
His surprise was like a kid in a candy store..
Great work. Love your editing, some of your stuff is funny!
I'm in a seniors apartment building, I tinker and I wish there was a work shop with a bench, vice and belt sander. I used to go to the hobby shops on a Marine base, but Obama canceled funding. So think of the old, retired guys.
Awesome video. And seeing his reactions made it! Keep it up!
Heck yeah!!!! Love that reaction. Congrats brotha!
You're a good man, Cody.
I saw u holding that washer and thought get vise grips get vise grips!! 😂 isnt it funny how often us guys do stuff like that
I had read that when mounting a vice, put it on the opposite side from your strong hand. In other words, if you're right handed, mount it on the left side, and vice versa. i did that when I built my welding table and it actually "feels" better than a vise on my strong side.
Matthew Andrew I never heard or thought of that but now that you mention it, it sure would be handy to have all that table top space for me to set the tools down on...on my dominant hand side. 🤔 Good call.
This is classic! Miss the quality and amazing content this channel used to produce.
I needed this video 2 weeks ago😬
My similar 6" Wilton purchased some 39 years earlier, and still my only garage shop vice, required an immediate upgrade. This one may not. I used the largest diameter grade 8 bolts inserted up from the bottom, with washers and grade 8 nuts on top, in order to solidly lock the swivel top section in place. Only then with a box wrench, could I apply the needed tightening force that the T-handles with a cheater could not, as they bent. I ground away the bolt head interference underneath, rather than use a smaller diameter bolt. Also, the protruding interference was reduced.
i have 2 vises one mounted normal position the other is mounted vertical so the tighting lever is on top this works great for holding flat plate when cutting it
Thankyou for sharing God Bless and what Wranglerstar said is right just get a stick you can use them they aren't that hard to use I learned to stick weld at 12 or you could go to harbor freight and get a mig welder for like 100 bucks
Praying for you and your family, Cody! Watching your videos is always a joy and inspiration. Thank you you for all you guys do to make clean inspirational videos with good values. May God Bless Your Family
Up next "The cheapest Magnetic base Drill Press on Amazon".....
Actually, Cody, I'm surprised you don't own one, with a nice set of Annular Cutters...
Just saying... Wink Wink...
......and Dewalt has a nice one!
"Up next "The cheapest Magnetic base Drill Press on Amazon"..... "
Here you go.
www.amazon.com/Mophorn-Magnetic-Diameter-Drilling-Portable/dp/B07M9Y3JCH/ref=sr_1_49_sspa?keywords=Magnetic+base+Drill+Press&qid=1582663428&sr=8-49-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFQVzBCUzlCQklPT1YmZW5jcnlwdGVkSWQ9QTA2NzQzODczNEpFNkRYUTY0M1VCJmVuY3J5cHRlZEFkSWQ9QTA2MTA4NTk0Mlc1STRGTEtFVTEmd2lkZ2V0TmFtZT1zcF9hdGZfbmV4dCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Cheers from Calgary AB 🇨🇦
You sir, are an absolute legend!
I’d love to see a Garand Thumb or Guns and Gear collaboration
so after using plasma cutters a bit, would you haul a 110v power supply and compressed air out in the field for a project, or would you take the oxy/acetylene torch
I love these videos Cody thank you.