2017 FZ07/MT07 gear sensor issue - EASY FIX

I am not a mechanic and this is for informational purposes only. I had an issue with the display not indicating the correct gear or any gear at all. The problem could be that the electrical contacts on the gear position sensor need to be cleaned. this is a step by step guide on how I accomplished this.

[@2KOLANAGLOWE]

Best tutorial i've ever seen. No shittalking, no music. Just the solution.

[@thumperdude630]

Thank you 🙏

[@andrewpalermo2987]

Agreed!

[@pandahasagun]

100% agree straight to the point great video angle, great explanation Best one I’ve ever seen as well

[@neiljarvis8911]

Best technical video I've seen. This should be the blueprint for all "how-to videos". Simply superb!

[@maxwellbeaver138]

Why can't all how-to repair videos be like this?
Quick, to the point, no fluff and explanation, everything he does is shown, all the dead time is cut, reassembly is included.
Everything you need, nothing you don't

[@8alakai8]

and he speeks very clear and slow that helps to

[@unklekody]

dude. genuinely, thank you for this.

[@melmore5807]

If only all things were this straight forward

[@janiebray562]

Great content! Very good explanation.

[@ismaelexplora5819]

thanks heaps! issue solved after following your tutorial

[@Pezzonovante]

Thanks a lot, Im having a similar issue with my 2015, will give this a try

[@grdos2329]

Thank you. I fixed Gear sensor on my tracer 700.

[@chronicalz506]

Thanks for the guide! Just fixed mine :)

[@TheQQRYQ80]

Thanks for your video.. I managed to fix that issue on my tracer 700.. good tutorial 👌

[@DuaneMillington-js7ev]

About to do mine. Best and easiest video to follow it looks like

[@amirhamzah4574]

Awesome explanation.

[@hidde4445]

Thanks this worked! Great video

[@MiaMariaMedia]

Such a good video dude! Mine wasnt going into neutral so olayed sround with the clutch cable and then found this video. This also helped it show 3rd gear woohoo! I didnt sand it dont have any sand paper but just cleaned it. Maybe ill samd it at a later date

[@m3lvn415]

Bookmarked for that rainy day.

[@user-pg1qk7rf3e]

Thank you brother!

[@8alakai8]

very good only i thing i did see was do you even lube your chain? if i take my cover of after 3 months its full of grease there

[@paulyeoman9652]

Fantastic.

[@zolitimo5482]

Thank you👍

[@kevinhumphrey4072]

Hey @thumperdude can you spray a bit of ACF-50 in the sensor to keep it clean and corrosion-free?

[@TseshQc]

Hi,
What type of sand paper did you use? Ty

[@marcutrillogibert9154]

Many thanks to safe my time

[@ggttvv02]

good

[@kilianc4768]

Which spray do you use to clean the sensor? Also, what type of oil do you use?

[@thumperdude630]

i believe i used brake cleaner. and i just use yamalube which should be what's recommended

[@YamahaRiderMT09]

is not only like that > the wire will broken inside (from vibrations ), you mast to clean the silicon of the back and welding the wire , then will be a good fix !

[@busansanai]

My experience: The sensor is housed in plastic. Do not overtighten it because this dingdong (aka myself) did it accidentally and now it has a crack on the screwhole. The replacement unit is like $200 or more.

[@juancalderon3824]

Did you add the chain guard back at the end?

[@wernerxldata]

I missed that part too :)

[@coltonbaird2060]

What oil did you use for the spring thing

[@thumperdude630]

yamalube. i dont remember the viscosity but use the same motor oil you put in your engine.

[@Fresh_gameplays]

What oil did you use?

[@GoProXadventures]

Looks like engine oil

[@8alakai8]

with this video a 6 year old could do it

[@stimpyueediot]

mine keeps flicking between gear when riding. going to see if this fixes it.