Link in description to get yours now! As I said in the video I had to redo this video twice so I had to re install the material on the dash. When you first remove it there will be residue but just use some heat, goo gone and a razor blade to get it off! It’s pretty easy! Thanks everyone for the support!
Easy enough except I really struggle with the sticking down part. Every time I peel off the adhesive layer, no matter how clean my surface is (an I do dab the screen with remover stickers), dots of dust seem to be attracted to the film so I end up and a few tiny but visible bubbles that can't be pushed out.
@@blakestuart9090 I used everything I could think of and ultimately it was Isopropyl Alcohol over 91-99% that took it off very easily. Thanks for responding though
Hey mate. I have purchased the LCD flip, but I haven't been able to install it yet. Will do it soon. I was just wondering, because I don't have goo gone available, do you think I can use something else to remove the glue residue?
@@DirtyHammmer Thanks. I use WD40 to remove glue residue on the tank or other surfaces. However, I never glue anything back onto the surface nor is it an electronic surface. So I'm affraid that WD40 could compromise either the LCD or the "stickiness" of the LCD flip
Hey! Yes you can. At the 6:15 mark it shows you how to install both together. To get some photo ideas on how it would look checkout @colorclusterz on instagram as they have a bunch of photos on there showing both!
All the lcd flips on the website are pre cut so you don’t need to worry about that. If you need a sheet just email ColorClusterz and they can sell you one!
How does the filter change the displayed digits from black to white? I get that it changes the background colour but the digits just has my mind boggled.
For some reason my screen looks exactly the same as yours did when you removed the OEM one and I though oh well my ones already removed as soon as I put the colorclusterz flipped LCD just went black til I removed it then it worked again
Link in description to get yours now! As I said in the video I had to redo this video twice so I had to re install the material on the dash. When you first remove it there will be residue but just use some heat, goo gone and a razor blade to get it off! It’s pretty easy! Thanks everyone for the support!
What can I use instead of a razor blade to remove the glue residue? You say it won’t scratch the screen but still don’t want to try it!
I'm about to pick up my 2020 mt-07 tomorrow.. this mod looks so promising, can't wait. Thanks for a great write-up.
Thanks! Can’t wait to see it!
great tutorial, this'll be my first mod when i get my hands on an MT
Awesome product and great video man, I might look into getting one in the future.
Reevy gonna look sick on your bike! Thanks for the support!
You should show how the colour clusterz film look with the LCD flip
lots of photos of this on the colorclusterz ig page!
How much hp does it add?
the exceptional egyptiaN +5hp. +10hp if you install it with the ColorCluster 😜
Does that make it easier to see at night?
Easy enough except I really struggle with the sticking down part. Every time I peel off the adhesive layer, no matter how clean my surface is (an I do dab the screen with remover stickers), dots of dust seem to be attracted to the film so I end up and a few tiny but visible bubbles that can't be pushed out.
Great vid brother man! cant wait till i get mine :D
Any visibility issues with polarised sunglasses ?
Is it possible to use hand sanitizer, to remove the remaining glue?
Yes hand sanitizer works great!
Looks so good. Is this easier to read in direct sunlight or the stock one?
Finterifyell yeah the black makes it easy to read! Probably the same as the oem one.
do i need to buy the lcd flip too? or can i just buy the colorcluster?
Lcd flip - changes it to black
ColorCluster - adds color to the dash. You can buy whatever you want!
Im doing this kit now on my 2016 FZ-07. I’m struggling to find a good adhesive remover. I had some old Goo Gone but it didn’t work. Any suggestions?
Hand sanitizer works surprisingly well too!
@@averagefz0749 ok I’ll give that a try. Thank you 🙏🏻
How about 50/50 alcohol and water?
@@blakestuart9090 I used everything I could think of and ultimately it was Isopropyl Alcohol over 91-99% that took it off very easily. Thanks for responding though
@@Nindoty231 The 91% worked but I managed to get air bubbles and can’t seem to get them out. 😡
Thank you, im wondering if the color option is installed differently?
MyNameStartsWithTriangles yes the color install is just laid on top of the lcd screen. There is another video on the channel showing it!
I installed it in my mt-07, is it normal that the background tends to blue in the dark?
Yes in darker conditions it’s blue. In the sunlight/brighter conditions it’s black
What are good substitutes for goo gone? would electronic cleaner work?
Actually if you use hand sanitizer it works really well! Anything with a high alcohol percentage
Hey mate.
I have purchased the LCD flip, but I haven't been able to install it yet. Will do it soon. I was just wondering, because I don't have goo gone available, do you think I can use something else to remove the glue residue?
Bo Ismono I hear wd40 works
@@DirtyHammmer Thanks. I use WD40 to remove glue residue on the tank or other surfaces. However, I never glue anything back onto the surface nor is it an electronic surface. So I'm affraid that WD40 could compromise either the LCD or the "stickiness" of the LCD flip
Tbh you can remove it without any adhesive if you use a razor blade. It will take longer but the screen is pretty durable!
@@Youknowthebo I used isopropyl alcohol and it worked great
Hi. Where I can get flip? I try ebay, nothing there 🤷♂️
www.colorclusterz.com is the only place
Funktioniert das auch mit anderen Farben und dem LCD Flip in Kombination?
Yes you can use both the colors and the lcd flip together!
can you install both the flip and color? do you have any video of it if you did do that?
Hey! Yes you can. At the 6:15 mark it shows you how to install both together. To get some photo ideas on how it would look checkout @colorclusterz on instagram as they have a bunch of photos on there showing both!
So I guess this will all fix all the scratches on my screen too
If you have any screens on the actual lcd screen then yes. But if they’re just on the casing check out my other video on how to remove those!
@@averagefz0749 awesome thanks
My screen is very sensitive to daylight. Did I something wrong? Thx for help
What do you mean sensitive to daylight?
What if you would heat up the old lcd screen?
Yes heating it up will help remove the old material
What degree of polarity is the film you used (i.e. 0, 45, 90) ?
All the lcd flips on the website are pre cut so you don’t need to worry about that. If you need a sheet just email ColorClusterz and they can sell you one!
How does the filter change the displayed digits from black to white?
I get that it changes the background colour but the digits just has my mind boggled.
It changes what is white to black and black to white. It’s just the affect of the polarizer at a specific angle.
@@techoutsider2801 thank you.
For some reason my screen looks exactly the same as yours did when you removed the OEM one and I though oh well my ones already removed as soon as I put the colorclusterz flipped LCD just went black til I removed it then it worked again
Yeah you need to remove the original material or it won’t work. Its hard to tell the original material is on there as it’s clear
Vitpilen 701?
You can buy the DIY kit on the website for the 701!
Can you install this and also have like purple on it
Hello yes you can!
Weiß jemand ob das in Deutschland erlaubt ist bzw ob es dadurch Probleme beim TÜV oder einer Kontrolle geben kann?
I know a few people in Germany who have had this on their bike for the past year and haven’t had any problems.
Hat du dir das geholt wills auch unbedingt?
Hätte die selbe Frage, gibts schon ein Update?
Ich denk aber das fällt eh keinem auf
Have you got a discount code?
bikelifeofginger
How about visibility during the day in the sun with the negative display?
The negative display actually comes factory on the Mt09 sp version! So there is no problem with visibility in the sunlight
how to change Kmh to Mph on mter mt07