I can’t figure out how to do the antenna wire. I have an adapter, but the black plastic piece on the antenna wire is in the way. How can I remove it? Should I remove it? I need answers 😩
I have this exact car radio in there now, do i need to disconnect the battery cables before putting in new radio??? Or can it be done without disconnecting battery
Parts are in the description bro but here are the dashkit and other parts you need. METRA electronics 99-5815 www.jpsaudio.com/product-page/99-5815 Metra electronics wire harness 70-5521 www.jpsaudio.com/product-page/70-5521 Antenna adapter 40 cr10 www.jpsaudio.com/product-page/ad-cr1
Hey jp I was just wondering what the best radio for the $$ was with backup camera and touch screen like a carplay one to install in my 07 fusion any help is appreciated thanks
@@jptheinstallguyI always liked Alpine, Pioneer,and Kenwood... Never really was a big fan of the Sony line of car stereos always had problems back in the day with the xplod era. And yes I've seen that the pioneer 1550 exs or x something is getting great reviews Thanks for the input man.
i pulled out my stock deck and bought a harness and wired up all of the necessary wires but there is another smaller female port from my car (16 data port i think it’s called?) and my deck won’t turn on so i’m thinking that has something to do with it? anything helps thank you.
Maybe I would word it definitely. What I mean is basically I can produce way more videos for everyone if I don't go over wiring a radio every single time. Since wiring is usually the same I made another video showing how to wire a radio, also if the car desires a module I have made that video as well. I try to have plenty resources for everyone so the videos stay efficient and consistent
Bro you rock. My LED just died in my fusion. Need a new one.
This video has been invaluable. Thank you
@@raymondcarter4335 💪🏾💪🏾💪🏾💪🏾
will this work for 2008 ford fusion also? they look pretty much the same
Hey jp! Important question for me: did the steering wheel controls still work after replacing the radio? Thanks!!!!!
yes it did but i had to use another swc module i have how to vids on those as well
Can you use any 6.2 inch display you wanted to for this car?
yes sir. 6.2 to 7 inch radios are good to fit
I can’t figure out how to do the antenna wire. I have an adapter, but the black plastic piece on the antenna wire is in the way. How can I remove it? Should I remove it? I need answers 😩
Does the Sync voice commands still work? If not how did you get them to? Never done this and my radio is messed up.
Where do I get the dash kit from
I got sound coming from all the door speakers but not from the rear deck speakers. Any help would be appreciated
I have this exact car radio in there now, do i need to disconnect the battery cables before putting in new radio??? Or can it be done without disconnecting battery
always disconnect the battery when dealing with ANYTHING electrical. Safety First
Which double din and installation kit size is recommended?
Parts are in the description bro but here are the dashkit and other parts you need.
METRA electronics 99-5815 www.jpsaudio.com/product-page/99-5815
Metra electronics wire harness 70-5521 www.jpsaudio.com/product-page/70-5521
Antenna adapter 40 cr10 www.jpsaudio.com/product-page/ad-cr1
Hey jp I was just wondering what the best radio for the $$ was with backup camera and touch screen like a carplay one to install in my 07 fusion any help is appreciated thanks
i like kenwood and jvc but i know that you can get a pioneer 1550 or sony xav1000 for under 300 bucks and they both have apple carplay.
@@jptheinstallguyI always liked Alpine, Pioneer,and Kenwood... Never really was a big fan of the Sony line of car stereos always had problems back in the day with the xplod era. And yes I've seen that the pioneer 1550 exs or x something is getting great reviews Thanks for the input man.
does apple car play work in this?
Would it be the same for a 2006?
yes should be the same
How much miles
What radio did u put in
i pulled out my stock deck and bought a harness and wired up all of the necessary wires but there is another smaller female port from my car (16 data port i think it’s called?) and my deck won’t turn on so i’m thinking that has something to do with it? anything helps thank you.
Did you ever figure this out? I’m have the same problem
Thanks for this!
Thanks for watching glad it helped.
Hell yeah, thanks man
Hi,this is Jem from binize car stereo,we are interested in your video of car stereo, plz tell us how to contact you~
can you put the link of the radio
Does a 7 inch screen needs the plastic frame ?
did u ever end up putting a stereo with a 7 inch screen in ur fusion ? did u need the trim ring if you did? i'm upgrading from a a 6.2 to a 6.8 inch
What are the dimensions from the bottom of the fusion sign to the ac knobs? I wanna make sure the new head unit looks normal
Will this same thing work on a 2008?
Yes should be good to go on that year
How in the Heck do you remove CD's that is Stuck in player ? Mine is a 08 fusion
does it require any soldering
depends yes/no
Your so cute 😍 love ur videos
7" screen radio?
does this work for 2006?
Should be the same I think
What size is that double din?
6.2 inch
Why does my double din not fit the fckn thing man GODDAMN IT
Wasting time ? It’s part of replacing the radio
Maybe I would word it definitely. What I mean is basically I can produce way more videos for everyone if I don't go over wiring a radio every single time. Since wiring is usually the same I made another video showing how to wire a radio, also if the car desires a module I have made that video as well. I try to have plenty resources for everyone so the videos stay efficient and consistent
does apple car play work with this car
As long as the radio has carplay your good