Terminate CAT6a Shielded Keystone Jacks | FS.com
HTML-код
- Опубликовано: 6 сен 2024
- In this video I show y'all how to terminate a Cat6a RJ45 STP Keystone Jack from FS.com. You also get to witness the first and second time terminating both ends of a cable with 0 practice before filming. Yes I know. I am very shocked myself.
Buy yours here!
Keystone Jacks - bit.ly/3uOn2hN
Moar Stuff!
Blank Keystone Patch Panel - bit.ly/3v7W19p
Cat6a Patch Cables - bit.ly/3uNZPMF
SFP+ Modules - bit.ly/3L4xSao
✪Support the channel✪
www.amazon.com...
spxlabs.com/links
spxlabs.com/shop
ts.la/stefano66335
Visit
spxlabs.com
Chat
/ spxlabs
/ discord
#fs #fs_transceiver #networking
@FS_com
Item Spotlights
Support Ieee 802.3af/at/bt, Verified IEC 60512-99-001 & IEC 60512-99-002 Test
The Shielded Keystone Jack, Against Emi/rfi, Next, and Axt
Fast Installation Without Any Special Punch Tool or Crimping Tool
Dual-color-coded Labeling for 568a/b (258a) Wiring Schemes
Gold-plated Rj45 Contacts for Optimal Conductivity
To Be Used with Keystone Wall Plate or Panel
Toolless Shielded Keystone Jack for Cat6 Ethernet Networking
FS provides keystone Cat6 toolless style connectors which make for a simple installation without the need for a punch down tool. Toolless keystone jacks are an ideal solution for terminating and connecting network cable.
Description
Product Type
Cat6 Keystone Jack
Color
Metal silver
Connector
RJ45 Female
Termination Type
Toolless
Shielding Type
Shielded
Data Rate Support
1000Base-T
Wire Gauge Supported
22-26AWG Cable
Wiring Scheme
T568A/T568B
Housing Material
Zinc Alloy
Dimensions (HxW)
16×14.5mm
Operating Temperature
-10°C to 60°C (-14°F to 140°F)
Contact Plating Thickness
6 Microinches
Compatible with Patch Panels and Network Cables
Designed for installation with convenience, and performance well with 1U 24/48 ports patch panels and network cables to improve management efficiency.
Good video probably should have used shielded cat6a but you explained very thoroughly.
Just wired my house upstairs for fiber -> cat6 -> switch. This was a great help. Worked first time, thanks!
Glad it helped!
Well done! Just untwist only as little as possible, as that ensures signal integrity
Or just use WiFi 🥴
@@SPXLabs 6E😲
@@SPXLabs I hope that was a joke
I was being completely playful
is there a reason these jacks aren't color coded in Europe? I purchased some and there's just plain white plastic inside.
I've got those same EZ crimpers, I love them.
A little trick to cutting the center out of cat6 cable, PULL the center a little bit, cut it, then pull back the other way. The Center divider ( how and what ever people call it these days ) will slide back in and be much cleaner :) Good video !
Did we just comment on each other’s channels at the same time?
@@SPXLabs correct, next step is talking on the phone lol :)
If we call each other at the same time though I’ll get a busy signal
@@SPXLabs Guess i'll have to beat you to the Tone with my ninja skills :P
Lol. OOOOOOOR we could just meet on discord?? I’m like on almost every Monday and Thursday night 8Central
This isn't great i'm afriad - Your ment to trim the 8 cables closer to the plastic collar, as per manafacturers instruction, No more than 0,5mm is acceptable otherwise you run the risk of the 8 cables shorting out to the metal body and cause noise or in worst case no connection at all. And as previously mentioned, you've not used the cables drain wire for the shielding of the cable (as per the title of this video) so you've potentially created an antenna for noise on the cable.
He didn't use shielded cat6a
I bought myself female to female keystones. I initially thought it was going to be simpler.. But like I said before on another of your video, after terminating 15 CAT6 cables and my fingers ending being tender at the end of the day, I think next time I'll just terminate 1 end with RJ-45 jacks and just use these at the network rack end.
Lol yeah I will definitely push my next person towards anything else over female to female patch panels. But hey now you are basically done forever!
@@SPXLabs Until I move somewhere else (nooooooooooooooo!)... Well, I just have many patch cables to do now... Really not looking forward to that. I know, I could purchase those but I'll save a tone of $$ doing them myself.. I'll just need some new fingers lol
Lol man I know the feeling. Idk if you’ve seen past videos but I’ve moved like 5 times since I started the channel. Moving is both a blessing and mostly a curse because you can redo your rack how you want
@@SPXLabs Yes, I've seen your past videos. And yes it is a curse. I mean it is fun to move in a new place and think about your design but doing all of this by yourself takes a long time. And not to put down the work of contractors who can do it for you, I trust more in my work as I am a perfectionist. If ever I move, it will be my last permanent location as I don't want to do this 5 times lolllllllll
Yeah I’ve said and heard that before. It’s my last time I swear!
So far the contractors run the cable pretty well about 70% of the time from my experience. So I get it and agree.
I have to do around 90 of them this week 😢
Ouch. I’m sorry. It’s not so bad. Better than a lot of the old methods
The title of this video is read as "Terminate a CAT6A shielded keystone jacks", but he used an unshielded cable. There are too many idiots trying to make videos on RUclips these days.
Well the keystone jack is shielded soooo.
I'm confused, you're not using shielded cable, so there is no shielding protection. The metal keystone is not making contact with any foil or drain wire so it's not shielding anything. Am I missing something? I think you'll find that if you use a cable tester, you'll have no shield continuity.
This is true. Purely demo purposes on the wiring portion
I gotcha. Just missing the info on making contact between the housing and shielding, but yeah good for the pin out.
You do bring up a very good point. Don’t let me sound dismissive
@@SPXLabs I would think you would have shielded cable so that the demo would be complete.
Let me demo how to terminate a shielded cable without using a shielded cable. Joke of a video.
Great video, thanks. I'd love to see some iperf benchmarks to test those 6a keystones, but ofc, you need a 10G port on both ends.
Thank you.
don't you need to keep the threads twisted inside the keystone?
Lol that this is the first recommended video for a shielded keystone Jack, and then the title misleads you into watching the video, and the shielding isn't even demonstrated😂
Got fiber aye
Hi, great video! I am now running CAT6 in my home network... I just bought a 5 port switch but the CAT6a cable doesn't fit. Do you have recommendation for a simple 5 port switch that supports CAT 6a ?
by support I mean, that it has bigger ports so that a CAT 6a cable can be plugged in..
That seems incredibly strange. Either the switch you have does not use the RJ45 connector or the cable you have does not have an RJ45 connector. Either way, RJ45 has been used for several years and is still used all the way up to CAT 8 cable. CAT4, CAT5, CAT5e, CAT6, CAT6a, CAT7, and so forth all use RJ45.
Can I know more about your goals? CAT6a is typically complete overkill for home use, with exceptions of course. Normally people install CAT6a because they want 10Gbps connections between computer clients and servers.
@@SPXLabs Thank you for your reply. Switch in question is TP Link 5 port - TL-SG105, I am able to fit my premade CAT 5 rj45's , however, my CAT 6A rj45 just barely do not fit. (They do fit in my Cisco Smat POE Switch) but do not fit in the 16.00 TP Link 5 port switch. If you ever experience or hear from other, please reply back to this thread. Thanks again and keep the good content coming!
That's really really weird.
amzn.to/3EU6MBi
casual symmetrical gigabit internet flex
i hate those damn connectors
Why? Too much trouble?
@@SPXLabs they tend to test for bad ground on fluke networking testers
Really?? That’s interesting. I wish I had a fluke tester to see that happen
you didn't use shielded cable
> Names video "Terminate shielded keystone jack"
> Shows how to terminate a non shielded wire
Da fuq, bro.
Yeah I know… didn’t really think too much of it at the time.
First